Font size
WorksheetsShop Safety- PreAssessment
Total questions: 46
Worksheet time: 24mins
If you get injured but are still feeling ok, do you still need to report it?
Yes
No
Maybe
Proper footwear for the woodshop is:
Work boots
Any type of shoe
Shoes must cover the toes, heel, and top of the foot
Those students allowed to work in the shop are:
Anyone with previous experience
Only individuals that have completed their safety and training tests
Anyone that thinks they know how
Equipment and tools available for you to use are:
Only tools and machines that I have been instructed in how to use.
Any tool in the shop
Any tool or machine that I can figure out how to use.
The FIRST priority when working at a machine is:
That I don't make any mistakes
That I watch other people around me
That I am always thinking about safety
I understand that if I do not follow the safety rules and procedures I will:
Greatly increase the possibility of injury.
Lose my privilege to work on machines.
All of the above.
Choose the proper clothing for woodshop.
School lanyards
Open-toed shoes
Dangly jewelry
Rolled up sleeves and tucked in clothing
When using tools, it is best to choose the right tool for the job. This means the tool should NOT be forced as this could cause the tool to break.
True.
False.
Check all things that are NOT allowed in Woodshop from the list below.
Running
Fooling around
Quietly Singing to yourself
Distractions
Choose ALL things that would be appropriate when asked to clean up.
Start cleaning immediately
Sweep up the floors
Put one last nail into my project
Help a classmate clean up their project
Hang tools back in proper area
If I see a classmate violating a safety rules, I can..
call them out loudly in a rude way
politely remind them to follow the safety rules
throw safety glasses at them
also ignore safety rules
Goggles are worn in the workshop. Why ?
A. To see more clearly what you are doing.
B. To stop someone poking their finger in your eye.
C. To look cool.
D. You could get dust or metal particles (swarf) in your eyes when using equipment.
Always tell the _____________ when a piece of equipment is not working properly or broken.
Classmate
Instructor
Parent
None of the above
Always get the instructor’s permission before ______________________.
Entering the workshop
Using the equipment
All the above
Why is it everyone's job to clean up the woodshop?
Saw dust and wood scrap create slipping hazards
To leave the shop clean for the next class
To help classmates move to the next step of the project
Materials for projects is not provided, except for:
Anything I can find in the shop
Materials left out on the bench tops
Wood that is given to me by the instructor
Why do we have a "no horseplay" rule in our shop? (mark ALL answers that apply)
There are lots of hazards in our room and an accident can occur easily if we horseplay.
Horseplay can cause injury to myself and others.
Horseplay causes accidents
Horseplay is immature and I'm expected to act accordingly.
Which of the following acts are considered "Horseplay" (select all that apply)
Running around the shop
Tightening a vice to break a pen
Having a "Sword Fight" with rulers
Following the instructions on your project sheet
Hiding another students project
Use the best tool for the job you need to perform, not the tool that works best for you.
True
False
Use the right size tool. Don’t use a small tool for heavy work or a large tool for fine work.
True
False
Before you use a tool be sure it is clean and in good condition.
True
False
Use your hands or fingers to test if a tool is sharp.
True
False
Be sure the tool handle is loose so that it moves as you work.
True
False
Its OK to use a dull or broken tool. If you have time report the defect to the instructor.
True
False
Always carry tools by the blade.
True
False
When you carry a tool, hold it so the point or sharp edge is aimed up toward the ceiling.
True
False
Avoid holding the tool with one hand and working with the other hand. Fasten the work down so you can work with both hands.
True
False
When you are ready to do work, you may not stand on one foot, and don’t over reach.
True
False
Don’t lay tools down near the edge of the bench, or where someone might trip over them.
True
False
Never aim a cutting tool toward your hands, arms, or body. Aim the tool away from you and others at all times.
True
False
Always keep your hands and arms in line with the path of a cutting tool.
True
False
When you are finished with a tool leave it with the other tools lying around.
True
False
Use the tools only if you understand how to use them correctly and safely. If you’re not sure, check with the instructor.
True
False
Which of the following is considered a shop safety guideline?
Following federal guidelines for safe practices
Keeping the shop free of hazards
Using tools and equipment correctly
All of the above
What are the two main federal agencies that issue guidelines and oversee safety in the workplace?
FDA and EPA
OSHA and EPA
FDA and OSHA
None of the above
Protective equipment (including protective clothing and eyewear) should be worn:
Whenever there is an inspection
At the user’s discretion
At all times in the shop
Never
Which one of the following is NOT considered a rule for safely handling tools and equipment?
Do not operate any piece of equipment unless trained
Inspect tools and equipment for defects or malfunctions before use
Do not use compressed air to blow dirt or aim air hose at another person
Disregard manufacturer’s recommendations for proper usage of tools
Which of the following precautions should you follow to safely lift objects?
Avoid greasy or wet floors
Use your knees to bend instead of your back
Use gloves if the object has jagged edges
Which one of the following eye protection guidelines is NOT correct?
Splash-resistant goggles when dealing with hazardous chemicals
Welding hood or helmet while welding
Sunglasses if welding is being performed close to work area
Proper glasses and wire mesh goggles or plastic spectacles with side shields around impact hazards like grinding areas
Which of the following is an example of proper grooming and hygiene in the shop?
Wearing a cap or pulling back long hair
Refraining from wearing loose or baggy clothing
Not wearing jewelry
Wearing flip flops
Which one of the following is NOT considered a safety guideline for working with hazardous materials?
Follow the manufacturer’s recommendations and material safety data sheets
Pour excess chemicals down the drain
Properly store chemicals and used rags
Be careful to prevent spills, damage to vehicles, or unsafe situations/conditions
Which of the following should be kept away from flammable chemicals?
Electrical devices
Sparks
Hot materials
All of the above
Which of the following is NOT an item you should use in the event of a shop fire?
Fire starter
Fire blanket
Fire extinguisher
Fire alarm
If someone encounters electrical current and receives an immobilizing shock, what is the first step you should take if they are still in contact with the current?
Pull them away from the current
Shut off the main circuit to the shop
Pull the fire alarm
Notify emergency personnel
If someone is injured, the first step is to:
Pull the Fire Alarm
Survey the situation
Panic
Check Vitals
Regulations from the _______ and local fire codes empower the local fire marshal to insist on an orderly, uncluttered, and safe shop area.
ATF
OSHA
FDA
