Font size
WorksheetsPrinter Technology Quiz
Total questions: 50
Worksheet time: 4hrs 10mins
What is the primary factor a home user typically weighs when deciding to purchase a printer?
Brand reputation
Performance versus cost
Color capabilities
Warranty length
Which of the following is NOT one of the five classifications of printing discussed?
Impact
Laser
Dye Sublimation
Virtual
What type of paper feed mechanism do impact printers use?
Sheet feeder
Tractor feed
Gravity feed
Manual feed
What is the name of the component in a daisy-wheel printer that strikes the back of the petal?
Print head
Actuator
Solenoid
Platen
The print quality of a daisy-wheel printer is known as:
Draft Quality (DQ)
Near Letter Quality (NLQ)
Letter Quality (LQ)
High Definition (HD)
How do dot-matrix printers form characters?
By spraying ink droplets
By striking an inked ribbon with pins
By using a heated element on special paper
By transferring toner with a laser
What is the term for the lower quality output of an early 9-pin dot-matrix printer?
Letter Quality (LQ)
Draft Quality (DQ)
Near Letter Quality (NLQ)
Standard Quality (SQ)
What is a common copyrighted term for an inkjet printer, owned by Canon?
Ink-spray printer
Bubble-jet printer
Droplet printer
Liquid-image printer
In an inkjet cartridge, what is the purpose of the small pinholes at the bottom of the chambers?
To let air in for proper flow
To spray ink onto the page
To measure ink levels
To clean the nozzles
What are the two main methods for spraying ink out of an inkjet cartridge?
Solenoid strike and piezoelectric flex
Heat vaporization and piezoelectric flex
Pressure pump and capillary action
Gravity feed and electrostatic attraction
What is the function of the maintenance station in an inkjet printer?
To align the print head
To pull ink through the nozzles to prevent clogging
To replace the ink cartridge automatically
To calibrate the color profiles
What type of motor is used to move the print head carriage in precise increments?
DC motor
Servo motor
Stepper motor
AC motor
What should you use to clean rubber pickup rollers in a printer?
Rubbing alcohol
Mild soap and water
Compressed air
A dry cloth
What do the paper-feed sensors in a printer detect?
The type of paper loaded
The end of the paper roll or tray
Paper jams and out-of-paper conditions
The color of the paper
What do the printer control circuits on a circuit board do?
Convert AC power to DC power
Run the stepper motors and monitor printer health
Convert signals from the computer into a datastream
Manage the network interface
What is the purpose of calibrating an inkjet printer?
To install the correct driver
To align the print heads for even printing
To set the correct date and time
To connect to a network
During the inkjet printing process, where is the received data stored before printing?
Hard drive
RAM
Onboard print buffer memory
CPU cache
What is the purpose of a cleaning cycle in an inkjet printer?
To clean the paper path
To purge the print heads of dried ink
To calibrate the colors
To align the print heads
What allows an inkjet printer to perform two-sided printing?
A secondary print head
A duplexing assembly
A special paper tray
A firmware setting
Laser printer technology is primarily based on what process?
Electrophotographic (EP) process
Electrostatic discharge process
Thermal transfer process
Ink dispersion process
Which component in a laser printer is often integrated into the toner cartridge? (Choose three)
Toner
Print drum
Laser scanning assembly
Cleaning blade
Why should you never touch the photosensitive drum in a laser printer?
It is very hot
It is fragile and easily damaged by light and dust
It is electrically charged
The oil from your skin will permanently stain the paper
What is the function of the laser scanning assembly?
To melt the toner onto the paper
To scan the image onto the photosensitive drum
To clean the residual toner off the drum
To transfer the toner to the paper
Which power supply provides the high voltages for the corona assemblies?
DC Power Supply (DCPS)
AC Power Supply (ACPS)
High-Voltage Power Supply (HVPS)
Transformer Unit (TU)
What is the function of the registration rollers?
To pick up the paper from the tray
To synchronize paper movement with the image-formation process
To eject the paper from the printer
To apply heat and pressure to the paper
What component is responsible for pulling the toner from the drum onto the paper?
Fuser assembly
Transfer corona assembly
Laser scanning assembly
DC power supply
What is the purpose of the static-eliminator strip in the transfer corona assembly?
To apply a charge to the paper
To drain away the charge from the paper to prevent jams
To clean the corona wire
To neutralize the charge on the drum
What two components in the fuser assembly permanently fuse the toner to the paper?
Heated roller and pressure roller
Corona wire and transfer roller
Laser and mirror
Pickup roller and separation pad
What is the function of the printer controller circuitry?
To convert AC to DC power
To convert signals from the computer into commands for the printer assemblies
To apply a charge to the corona wire
To heat the fuser rollers
What gas is produced by the high-voltage coronas in older laser printers, requiring an ozone filter?
Oxygen
Nitrogen
Ozone
Carbon Dioxide
What is the correct order of the seven steps in the EP print process?
Processing, Charging, Exposing, Developing, Transferring, Fusing, Cleaning
Charging, Exposing, Developing, Processing, Transferring, Fusing, Cleaning
Cleaning, Charging, Exposing, Developing, Transferring, Fusing, Processing
Processing, Exposing, Developing, Charging, Transferring, Fusing, Cleaning
During which EP step is a uniform -600VDC charge applied to the photosensitive drum?
Exposing
Charging
Developing
Transferring
In the developing step, what charge does the developing roller acquire to attract the toner?
+600VDC
-600VDC
+100VDC
-100VDC
What happens during the transferring step?
The laser writes the image on the drum.
Toner is transferred to the drum.
Toner is transferred from the drum to the paper.
The toner is melted onto the paper.
What occurs during the cleaning step of the EP process?
The printer is turned off and on.
Excess toner is scraped off the drum and the charge is cleared.
The paper path is cleared of debris.
The ozone filter is replaced.
What kind of special paper do thermal printers often use?
Multipart forms
Waxy paper that turns black when heated
Standard copy paper
Glossy photo paper
Virtual printing primarily sends the desired output to:
Another physical printer on the network
A file
The computer's clipboard
A cloud storage service
Which of the following is a common and useful virtual print option?
Print to File
Print to Image
Print to PDF
Print to XPS
Which interface has largely replaced parallel for connecting local printers?
Serial
USB
Ethernet
PS/2
What is a significant advantage of a network interface in a printer?
It is less expensive than USB.
It doesn't require a driver.
It allows the printer to be its own print server.
It prints faster than any other interface.
Which page-description language was developed by Adobe and first used in Apple printers?
PCL
GDI
PostScript
XPS
What is the most likely result of using the wrong printer driver?
The printer will print blank pages.
The printer will print garbled text or garbage.
The printer will run slower.
The printer will not be recognized.
What is a crucial step after installing a new inkjet printer and its driver?
Rebooting the computer
Calibrating the printer
Installing a new ozone filter
Sharing the printer on the network
In the printer Properties dialog box, which tab is used to share the printer with other users on a network?
General
Sharing
Ports
Advanced
What is the purpose of the "Print Test Page" button in the printer Properties?
To calibrate the printer
To clean the print heads
To verify a successful installation and communication
To align the paper
What is the primary benefit of using a printer with a built-in network interface card (NIC)?
It doesn't require a driver.
It is cheaper than a USB printer.
It eliminates the need for a dedicated computer to act as a print server.
It can only be used by one computer at a time.
Which protocol is the default for TCP/IP printing and uses port 9100?
LPD
RAW
SNMP
HTTP
What is the technology developed by Apple that allows for automatic discovery of printers on a local network?
AirPrint
Bonjour
ePrint
Cloud Print
What is the main characteristic of cloud printing?
Printing over a wireless network
Printing to a printer located anywhere via the Internet
Printing using a Bluetooth connection
Printing to a virtual PDF file
What feature on many office printers allows a user to send a print job and then enter a PIN at the physical printer to release it, enhancing security?
Cloud Print
Secure Printing / Private Printing
Network Printing
Driver Encryption
