WorksheetsSafety Test
Total questions: 50
Worksheet time: 25mins
What is the first thing you should do before using any power tool?
Plug it in and start working
Inspect the tool for any damage or defects
Ask a friend to use it for you
Adjust the settings while it's running
Which of the following should always be worn in the workshop?
Sandals
Loose clothing
Safety goggles
Jewelry
If you notice a machine is malfunctioning, you should:
Continue using it until it stops
Fix it yourself
Report it to the instructor immediately
Ignore it and use another machine
Which of the following is the best way to prevent electrical shock?
Use tools with damaged cords
Keep the work area dry
Stand on a metal surface
Use tools with wet hands
What should you do if you spill a chemical in the workshop?
Leave it and let it evaporate
Wipe it with your shirt
Inform the instructor and clean it up according to safety procedures
Cover it with paper towels and continue working
Hearing protection should be worn in the workshop:
whenever you are exposed to loud noises
only when using hand tools
only during lunch breaks
when the workshop is empty
What is the purpose of a machine guard?
To make the machine look more complicated
To protect the user from moving parts
To slow down the machine
To add extra weight to the machine
Loose clothing, hair, and jewelry should be secured because:
They can get caught in moving parts and cause injury
They make you look unprofessional
They can make the workshop dirty
They are uncomfortable in the workshop
Which of the following is NOT a safe practice when using a drill press?
Securing the workpiece with clamps
Wearing gloves while operating the drill press
Ensuring the drill bit is properly tightened
Using the correct speed for the material being drilled
Before making any adjustments to a machine, you should:
Unplug or turn off the machine
Ask someone else to do it for you
Make adjustments while the machine is running
Use a tool to hold the adjustment knobs
Why is it important to know where the emergency stop button is located?
To show off your knowledge to classmates
So you can turn off the machine if something goes wrong
To use it as a regular power button
It’s not important at all
How should you carry a sharp tool?
With the sharp edge pointing upwards
In your pocket
With the sharp edge pointing downwards
By throwing it to someone else
What should you do if you get a small cut while working?
Ignore it and keep working
Scream for help
Inform the instructor and get first aid
Wipe the blood on your clothes
When working with materials that create dust, you should:
Hold your breath while working
Ignore the dust, it’s harmless
Wear a dust mask or respirator
Use a fan to blow the dust away
Which of the following is a safe practice when using a table saw?
Push the material through the saw with your hands close to the blade
Use a push stick to guide small pieces of wood
Stand directly behind the blade to get a better view
Use any blade, regardless of its condition
Before using a new tool, you should:
Test it on the hardest material available
Ask the instructor for a demonstration
Use it without any prior knowledge
Let a friend use it first
If you see a classmate using a tool incorrectly, you should:
Correct them immediately
Ignore them, it's their responsibility
Inform the instructor immediately
Make fun of them
Which of the following should NOT be done when handling heavy objects?
Lift with your legs, not your back
Ask for help if the object is too heavy
Lift with a twisting motion
Plan your route before carrying the object
In case of a fire in the workshop, your first action should be to:
Run out as quickly as possible
Use the nearest fire extinguisher, if safe to do so
Why is it important to keep your work area clean?
To prevent accidents caused by tripping or slipping
To make your instructor happy
So you can leave early
It’s not important; messes are fine in the workshop
Which of the following is the most appropriate footwear for the workshop?
Flip-flops
Sneakers
Steel-toed boots
Barefoot
What is the correct way to unplug a power tool?
Yank the cord from the outlet
Pull on the plug, not the cord
Turn off the tool and leave it plugged in
Use your foot to pull out the plug
Before using a ladder in the workshop, you should:
Make sure it is fully extended and locked
Place it on an uneven surface
Climb it quickly to save time
Stand on the top step
Why is it important to keep your hands away from the cutting area when using a saw?
To avoid getting sawdust on your hands
To ensure a clean cut
To prevent serious injury
To see the blade better
What should you do if a tool feels unusually hot during use?
Keep using it until it cools down
Dip it in water to cool it off
Turn it off and inspect for any issues
Use another tool to finish the job
Which of the following is a proper response to a minor burn?
Cover it with a bandage immediately
Run cool water over it for at least 10 minutes
Apply ice directly to the burn
Ignore it and continue working
What is the purpose of a grounding pin on a power cord?
To make the plug fit into the outlet
To reduce electrical noise
To prevent electrical shock
To increase the power output of the tool
When using a chemical solvent, what safety precaution should be taken?
Work in a well-ventilated area
Mix it with other chemicals to increase effectiveness
Pour it into any container
Use it without gloves to improve dexterity
What is the proper action if you notice a frayed power cord?
Tape it up and continue using the tool
Report it and replace the cord before use
Use it only for light tasks
Cover it with a cloth to avoid touching it
How should you dispose of oily rags used in the workshop?
Throw them in the regular trash
Wash them and reuse them
Store them in a metal container with a tight-fitting lid
Leave them on the workbench for later use
If you accidentally drop a tool, you should:
Let it fall and move out of the way
Try to catch it quickly
Kick it away from you
Ignore it and continue working
What should you do before leaving the workshop at the end of the day?
Clean and organize your workspace
Leave tools wherever you last used them
Why should you avoid using excessive force with hand tools?
It makes the job go slower
It can damage the tool and cause injury
It wastes energy
It improves the quality of your work
Which of the following should be used to protect your lungs when working in dusty conditions?
A surgical mask
A dust mask or respirator
A cloth scarf
No protection is necessary
When working with sharp tools, it is important to:
Point the sharp edge towards yourself
Carry them with the sharp end pointing down
Sharpen them while they are in use
Leave them lying around for easy access
Which of the following is the best way to prevent a fire in the workshop?
Use flammable materials near open flames
Store oily rags in a safe container
Leave electrical equipment on when not in use
Keep exits blocked to contain any fire
When using a power sander, you should:
Hold the workpiece in your hand
Clamp the workpiece securely
Apply maximum pressure for a smoother finish
Sand towards your body for better control
What is the first step when using a fire extinguisher?
Aim at the top of the fire
Pull the pin
Squeeze the handle
Sweep from side to side
What should you do if you feel dizzy or lightheaded in the workshop?
Continue working until it passes
Sit down immediately and rest
Drink water and resume work
Inform the instructor and leave the workshop if necessary
Which of the following is true about using extension cords?
They should be used as a permanent power source
They can be daisy-chained for more length
They should be inspected regularly for damage
It’s safe to use them with any electrical load
What does the acronym PASS stand for when using a fire extinguisher?
Point, Aim, Shoot, Sweep
Pull, Aim, Squeeze, Sweep
Push, Activate, Squeeze, Spray
Pull, Adjust, Squeeze, Spray
Which class of fire extinguisher is used for electrical fires?
Class A
Class B
Class C
Class D
Before using a fire extinguisher, you should first:
Ensure the fire is not too large to handle
Sound the fire alarm and call for help
Grab any available extinguisher
Spray the fire immediately
Which type of fire is a Class A fire extinguisher designed to put out?
Fires involving flammable liquids
Fires involving electrical equipment
Fires involving ordinary combustibles like wood, paper, or cloth
Fires involving metals
What is the correct distance to stand from a fire when using a fire extinguisher?
As close as possible
6-8 feet
Which of the following is NOT a step in using a fire extinguisher?
Pull the pin
Aim at the base of the fire
Squeeze the handle
Shake the extinguisher vigorously before use
After using a fire extinguisher, you should:
Leave the area immediately
Place the extinguisher back on the wall
Report the use to the appropriate personnel and have the extinguisher recharged or replaced
Ignore the empty extinguisher and continue working
Which type of fire extinguisher should you use for a grease fire in a kitchen?
Class A
Class K
Class C
Class D
What should you do if the fire does not go out after using the entire fire extinguisher?
Get another extinguisher and continue trying
Leave the building immediately and call the fire department
Try using water instead
Move closer to the fire and try again
Which of the following best describes how to aim a fire extinguisher?
Aim at the flames
Aim at the center of the fire
Aim at the base of the fire
Aim above the fire
