NEW
Font size
WorksheetsMachine Safety - POG Rotation
Total questions: 23
Worksheet time: 12mins
What should you do if you are not completely familiar with a machine?
Operate it immediately
Obtain advice from the instructor
Read the manual
Ask a friend for help
When should safety glasses or face shields be worn?
Only when using a drill
As soon as you walk into the machine room
Only when using a saw
When working with wood
What type of footwear is not allowed in the machine room?
Sneakers
Open-toe shoes
Boots
Closed-toe shoes
What must be in place and used at all times?
Safety glasses
Guards
Gloves
Earplugs
When should adjustments to the machine be made?
While the machine is running
With the power on
With the power off
Anytime
What should be done before making repairs to a machine?
Disconnect from the power source
Call a technician
Read the manual
Wear gloves
What is the rule about operating machinery?
Anyone can operate it
Only with a certified teaching professional's permission
Only students can operate it
Only during class hours
What is the primary use of a band saw?
Drilling holes
Cutting arcs and long pieces of wood
Sanding surfaces
Polishing metal
How should the upper guide assembly of a band saw be adjusted?
As far as possible
As close to work as possible
At a random distance
At a fixed distance
What should always be done before cutting long curves with a band saw?
Adjust the blade
Make release cuts
Change the blade
Measure the wood
What should you never attempt with a band saw?
Cut a smaller radius than the blade will accept
Cut straight lines
Cut large pieces of wood
Cut metal
What is the primary use of a drill press?
Cutting wood
Drilling vertical holes
Sanding surfaces
Polishing metal
What should be adjusted to avoid drilling into the table with a drill press?
The speed
The table or depth stop
The drill bit
The power setting
What should never be drilled with a drill press?
Metal
Wood
Material that is not clamped
Plastic
What is the primary use of a disc finishing machine?
Drilling holes
Rounding edges and smoothing flat parts
Cutting wood
Polishing metal
Where should you always sand on a disc finishing machine?
On the upward side of the disc
On the downward side of the disc
On the edge of the disc
In the center of the disc
What should you never wear when using a disc finishing machine?
Safety glasses
Gloves
Earplugs
A mask
What should you do before leaving the machine room?
Ask a friend to clean up
Take all tools home
Leave machines running
Turn off all machines and clean your area
Which item of clothing should be avoided when operating machinery?
Closed-toe shoes
Short sleeves
Safety glasses
Loose clothing
What is the first step if a machine malfunctions while in use?
Turn off the machine and inform the instructor
Continue using the machine
Ignore the problem
Try to fix it yourself
What should you do if you notice a safety hazard in the machine room?
Ignore it and continue working
Report it to the instructor immediately
Try to fix it yourself without telling anyone
Wait until someone else notices
Which of the following is NOT a safe practice when using power tools?
Wearing safety glasses
Using tools with damaged cords
Following the instructor's directions
Keeping your work area clean
Before starting any machine, what is the most important thing to check?
That the lights are on
That your friends are watching
That all guards are in place and secure
That the machine is plugged in
