Font size
WorksheetsGeneral Shop Safety - Intro to Welding
Total questions: 58
Worksheet time: 39mins
Negligence is defined as:
The failure to exercise reasonable care, resulting in damage or injury to another.
The intentional causing of harm to another person.
The act of following all safety procedures at all times.
The process of resolving disputes outside of court.
Which of the following lists proper PPE (Personal Protective Equipment)?
Gloves, safety goggles, hard hat, ear protection
Sandals, sunglasses, shorts, t-shirt
Scarf, flip-flops, baseball cap, watch
Sweater, jeans, sneakers, belt
The fire triangle consists of which three elements?
Heat, fuel, and oxygen
Water, fuel, and carbon dioxide
Heat, water, and nitrogen
Oxygen, carbon dioxide, and light
What makes Blue Collar occupations so dangerous?
Noise levels are high
Water is used a lot in conjunction with electricity
Heavy work (lifting)
Chemicals are used (pesticides, splashing)
Work alone
Fill in the blank: ___% of accidents are caused by unsafe acts.
80%
50%
30%
10%
Fill in the blank: ___% of accidents are caused by unsafe conditions.
20%
50%
70%
90%
Which of the following is considered a defect of a person according to the factors of accidents?
Inexperience
Improper attitude (not willing)
Unsafe acts
Personal habits
What is the leading cause of lost work time according to the image?
Headaches
Back problems
Eye strain
Hand injuries
Fill in the blank: 8 out of 10 people in the U.S. will consult a physician for ________ sometime in their lives.
back problems
vision problems
skin rashes
hearing loss
Under what circumstances are companies held liable for accidents?
If the employer is negligent.
If the employee is always at fault.
If the accident occurs outside work hours.
If the company has no safety policies.
Negligence in your own words refers to:
Failing to take proper care in doing something, leading to an accident.
Always following safety procedures at work.
Reporting every minor incident immediately.
Receiving training for all job tasks.
What does PPE stand for?
Personal Protective Equipment
Public Protection Entity
Personal Performance Evaluation
Professional Protective Equipment
Fill in the blank: For body protection, you should wear an apron, long sleeve shirt (100% cotton), pants, boots or _________.
closed toe shoes
sandals
flip flops
slippers
Fill in the blank: To protect yourself from inhaling harmful substances, you should use a _________.
Mask/Respirator
Gloves
Apron
Helmet
Safety in the shop is whose job?
Safety is your job.
Safety is only the manager's job.
Safety is only the supervisor's job.
Safety is only the safety officer's job.
Safety glasses or goggles must be worn all the time in the classroom shop.
True
False
What shade should be used for which process for SMAW/GMAW/GTAW?
8-10
3-8
10-14
What does the acronym PASS mean
Pull, Away, Span, Stay
Push, Aim, Swat, Stare
Pull, Aim, Squeeze, Sweep
Pass, Air, Stop, Squeeze
What is the proper class of fire and type for Class A?
Combustible Metals
Electrical Equipment
Flammable Liquids
Ordinary Combustibles
What is the proper class of fire and type for Class B?
Kitchen Fires
Electrical Equipment
Flammable Liquids
Combustible Metals
What is the proper class of fire and type for Class C?
Ordinary Combustibles
Electrical Equipment
Combustible Metals
Flammable Liquids
What is the proper class of fire and type for Class D?
Kitchen Fires
Flammable Liquids
Ordinary Combustibles
Combustible Metals
What is the proper class of fire and type for Class K?
Kitchen Fires
Flammable Liquids
Electrical Equipment
Combustible Metals
Above what number PSI is Oxy-Fuel (acetylene) pressure supposed to be set to in the welding shop?
(a)
What does the Red safety color mean?
(a)
What does the safety color Orange mean?
(a)
What safety color does yellow mean?
(a)
What safety color does blue mean?
(a)
What does the safety color green mean?
(a)
What does the safety color white mean?
(a)
What do the safety colors white and black together mean?
(a)
What does the safety color gray mean?
(a)
What do the safety colors black and yellow mean together?
(a)
What are the causes of flash burn in the welding shop?
UV Radiation
Bright lights
Lack of sunglasses
The sun
What are the symptoms of a 2nd degree burn?
Redness
Blistered
Swollen
All the above
Fire extinguishers should be checked how often?
(a)
What makes up the fire triangle?
Heat, Fire, Oxygen
Fuel, Heat, Oxygen
Fire, Chain Reaction, Fuel
Chain Reaction, Heat, Oxygen
Which of the following is NOT a part of PPE?
Tying hair back
Respirator
Sandals
FR clothing
What does PPE stand for?
Personal Protective Equipment
Personal Protection Evidence
Practical Protective Equipment
Proper Protective Equipment
What is NOT included in the following of OSHA checks?
Damage
Serviced semi-annually
Leaks
Tamper seal in tact
What degree burn can be white or charred with no sensation?
2nd
3rd
1st
Both A and B
ANSI Stands for American National Standards (a) .
OSHA stands for Occupational Safety and Health (a) .
The code ANSI (a) should be on all safety glasses allowed in the shop.
Metal can typically get as hot as (a) degrees F.
Gloves protect up to_____ degrees F?
2,000
10,000
12,000
4,000
What areas of housekeeping are you responsible for?
Your work area and general shop
Your space and nothing else
Your weld and weld table
Yourself and your locker
What are some of the 20 safety rules?
Get a 100% on the test
Wear PPE
Point sparks downward
No food or Drink
No phones
What are some safety practices with the drill press?
Clamp Material
Use water or oil
Go fast
Use a face shield
Have the bit fully going before drilling
What should be used to check for leaks?
Soapy Water
Gas
Smell
OIl
Acetylene with the Oxy-Fuel should never go above (a) psi in the classroom.
What is NOT the correct term for sunburning your eye due to UV light emitted from the arc?
Flash Burn
Arc Eye
Sand in the Eye
Arc Flash
Shout (a) before striking an arc.
What shade should you use for the Oxy-Fuel
6-15
4-6
3-8
8-10
What shade should be used for Plasma cutting?
4-7
8-10
3-8
2-4
What are safety practices with the Band Saw?
Clamp Material
Oil the blade before every use
Turn your dial 1/16th of a turn on on the band saw
Wear gloves
Use a metal stand for longer material
What are safety practices with the Pedestal Grinder?
Grind only on the front of the wheel
Wear gloves
The rest must be within 1/8 of an inch from the wheel
Hands can get withing 1 inch of the wheel
What are safety practices when using the angle grinder?
Clap metal
Use one hand
Use guards only as needed
Point sparks at bottles
Face shields only used as needed
