wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Plumbing Systems Quiz

Total questions: 50

Worksheet time: 25mins

Name
Class
Date
1.

What is an Air Gap in a water supply system?

a)

A valve preventing backflow

b)

An unobstructed vertical distance through the free atmosphere

c)

A pipe connecting fixtures

d)

A drainage opening

2.

What is Backflow?

a)

Water moving through a filter

b)

Flow of water into distributing pipes from its intended source

c)

Flow of water into distributing pipes from an unintended source

d)

The discharge of sewage

3.

Back Siphonage refers to:

a)

Negative pressure in a water supply pipe

b)

High pressure in a water supply pipe

c)

Opening of a fixture trap

d)

Blockage in the main sewer

4.

A Blind Flange is used to:

a)

Connect two fixtures

b)

Close the end of a pipe

c)

Allow controlled discharge of water

d)

Prevent back pressure

5.

A Blow off is:

a)

A vent for air circulation

b)

A controlled outlet on a pipeline to discharge water

c)

A branch pipe

d)

A waste trap

6.

The Branch Interval corresponds to:

a)

A storey height in a building

b)

The slope of a horizontal pipe

c)

The trap seal depth

d)

The diameter of a vent

7.

A Circuit Vent serves:

a)

Only one trap

b)

Two or more traps from the front of the last fixture

c)

The sewer line only

d)

The storm drain

8.

Cross Connection means:

a)

Slope of a horizontal pipe

b)

A connection between potable and non-potable water systems

c)

A valve used for flushing

d)

A vent connecting stacks

9.

Diameter of a brass pipe refers to:

a)

Outside diameter (OD)

b)

Inside diameter (ID)

c)

Both OD and ID

d)

Circumference of the pipe

10.

Drainage System includes:

a)

Only potable water pipes

b)

Only rainwater pipes

c)

All pipes conveying sewage, rainwater, or liquid waste

d)

Only vent pipes

11.

Flood Level refers to:

a)

Tank water level for flushing

b)

Lowest portion of the trap

c)

Top of the vent stack

d)

Bottom of a sump

12.

A Flushometer Valve operates by:

a)

Direct water pressure

b)

Gravity pressure

c)

Air suction

d)

Cross connection

13.

The Invert of a pipe is:

a)

The slope of the pipe

b)

The lowest portion of the inside of a pipe or conduit

c)

The vertical section of a stack

d)

The trap seal

14.

Main Sewer is controlled by:

a)

Public authority

b)

Private contractor

c)

Property owner

d)

Engineer

15.

A Relief Vent provides:

a)

Water circulation

b)

Air circulation between drainage and vent systems

c)

Controlled discharge of sewage

d)

Backflow prevention

16.

Sanitary Sewage means:

a)

Industrial waste

b)

Human excrement and liquid household waste

c)

Stormwater only

d)

Chemical waste

17.

A Sump is defined as:

a)

A pit or receptacle at a low point where liquid waste is drained

b)

A sewer main

c)

A vent opening

d)

A backflow device

18.

Trap Seal is:

a)

Maximum vertical depth of liquid that a trap retains

b)

Slope of the pipe

c)

Diameter of the trap

d)

Top of vent pipe

19.

Vertical Pipe means:

a)

Pipe installed vertically or less than 45° from vertical

b)

Pipe installed horizontally

c)

Pipe connected to main sewer

d)

Pipe used in drainage only

20.

Waste Pipe conveys:

a)

Sewage only

b)

Stormwater only

c)

Liquid waste from fixtures free of fecal matter

d)

Vent gases

21.

What is a Battery of Fixtures?

a)

Two or more adjacent fixtures discharging into a common branch

b)

A vent stack extension

c)

A closed pipe end

d)

A controlled water valve

22.

What is a Bib?

a)

A drain opening

b)

A synonym for faucet or cock

c)

A vent extension

d)

A trap seal

23.

What is a Branch in piping?

a)

Main riser only

b)

Any part of the system other than the main riser

c)

A vent pipe

d)

A sump connection

24.

What is a Branch Vent?

a)

Connects fixtures directly to sewer

b)

Connects one or more vents with a vent stack

c)

Provides air to sump

d)

Prevents blowback

25.

What is Calking?

a)

Plugging an opening with oakum or lead

b)

Flushing a water closet

c)

Slope of a horizontal pipe

d)

A type of valve

26.

What is a Continuous Vent?

a)

A vertical vent continuation of a drain

b)

A branch connection

c)

A secondary sewer

d)

A sump opening

27.

Combination Fixture means:

a)

Two or more compartments with one trap

b)

One pipe connected to sump

c)

Trap venting system

d)

Waste pipe with vent

28.

What is a Common Vent?

a)

Vent shared by two fixtures connected to a single trap

b)

Vent pipe only for main stack

c)

Sewer vent

d)

Battery vent

29.

What is a Dead End?

a)

An extended pipe closed at one end

b)

A slope of pipe

c)

A vent opening

d)

A valve connection

30.

What is Developed Length?

a)

Length along the center of pipe and fittings

b)

Diameter of the pipe

c)

Height of vent stack

d)

Trap seal

31.

What is a Fixture Branch?

a)

A vent line from the main stack

b)

A drain connecting several fixtures to a stack

c)

A backflow preventer

d)

A sump opening

32.

What is a Fixture Drain?

a)

Outlet pipe from a trap to another part of the drainage system

b)

The vent connection

c)

The slope of a horizontal sewer

d)

The main riser pipe

33.

What is a Fixture Unit?

a)

A measure based on the rate of discharge, duration, and frequency of use of a fixture

b)

The weight of a plumbing fixture

c)

A combination of fixtures

d)

A sump connection

34.

What is a Flush Tank?

a)

Tank for storage of potable water

b)

Tank for flushing water closets and urinals

c)

Reservoir for stormwater

d)

Trap seal container

35.

What is a Gate Valve?

a)

Valve that completely stops the flow with a flat gate

b)

Valve that controls pressure only

c)

Valve used for backflow prevention

d)

Valve for vent stacks

36.

What is a Globe Valve?

a)

Valve with a disk seating against a spherical surface

b)

Valve with flat gates

c)

Valve for relief vent

d)

Valve only for sump pumps

37.

What is a House Drain?

a)

Drain connecting fixtures to vent

b)

Lowest horizontal piping of a system inside a building

c)

Drain used for stormwater

d)

Trap vent pipe

38.

What is a House Sewer?

a)

Drain from building to public sewer or disposal system

b)

Vent stack for plumbing system

c)

House drain vent

d)

Sump connection only

39.

What is a Leader?

a)

Pipe conducting rainwater from roof to storm drain

b)

Main water riser

c)

Fixture branch

d)

Vent connection

40.

What is a Lateral Sewer?

a)

Branch sewer that discharges into a main sewer

b)

Pipe connecting two traps

c)

Drain from fixtures to vent

d)

Stormwater leader

41.

What is a Main?

a)

Principal pipe in a supply, drainage, or sewer system

b)

A small branch vent

c)

A sump opening

d)

Fixture connection pipe

42.

What is a Mixing Valve?

a)

Valve that mixes water at different temperatures

b)

Valve that prevents blowoff

c)

Valve only for stormwater

d)

Valve for vent stacks

43.

What is a Non-Return Valve?

a)

Valve that allows flow in only one direction

b)

Valve that mixes hot and cold water

c)

Valve used for air venting

d)

Valve that closes dead ends

44.

What is a Plumbing System?

a)

All piping and fixtures within a building for water supply and waste disposal

b)

Only the drainage network

c)

Only the water supply pipes

d)

Only the vent stack

45.

What is a Potable Water supply?

a)

Water suitable for drinking and domestic purposes

b)

Water for industrial use only

c)

Stormwater for flushing

d)

Sewage treated water

46.

What is a Septic Tank?

a)

Watertight tank receiving sewage for primary treatment

b)

Ventilation chamber

c)

Water storage reservoir

d)

Backflow preventer

47.

What is a Soil Pipe?

a)

Pipe that conveys discharge with fecal matter

b)

Pipe for rainwater only

c)

Pipe for vent gases

d)

Pipe for sump water

48.

What is a Stack?

a)

Vertical main pipe for soil, waste, or vent

b)

Horizontal branch

c)

Sump drainage pipe

d)

Fixture trap outlet

49.

What is a Trap?

a)

A fitting with a liquid seal preventing sewer gas backflow

b)

Pipe connected to sump

c)

Vent extension

d)

Valve for back pressure

50.

What is a Vent Stack?

a)

Vertical vent pipe installed primarily for providing air circulation to drainage system

b)

A stack carrying sewage

c)

A sump overflow pipe

d)

A relief valve connection