WorksheetsMachine Shop Test Review: Lathe & Vertical Mill
Total questions: 26
Worksheet time: 13mins
The __________ allows the table to move forward and backward.
Saddle
Chuck
Tailstock
Spindle
The __________ can move up and down for drilling operations.
Quill
Chuck
Bed
Column
Workpieces are usually held in a __________ or clamps.
Vice
Hammer
Screwdriver
File
Which of the following is NOT a basic milling operation?
Facing
Slotting
Boring
Turning
Pocket milling removes material from:
The edges
Inside a defined area
A drilled hole
Only curved surfaces
A __________ is used to start holes in the lathe.
Center Drill
Twist Drill
Reamer
Tap
Which operation smooths the end of a part?
Turning
Facing
Drilling
Knurling
Which tool would be used to cut threads?
Parting tool
Boring bar
Threading tool
Knurling tool
Matching - Operations: Match the operation to its correct description. 36. Knurling
A. Cutting decorative or grip patterns
B. Reducing diameter
C. Cutting off part of the workpiece
D. Making holes
E. Flattening the end
Which of the following lists two similarities between the mill and the lathe?
Both are used for machining and can shape metal parts.
Both are only used for wood cutting and cannot shape metal.
Both are manual tools and do not require power.
Both are exclusively used for drilling holes.
Which part of the milling machine holds and rotates the cutting tool?
Spindle
Table
Base
Column
What is the main purpose of a tailstock on a lathe?
To hold the cutting tool
To support long workpieces
To rotate the spindle
To move the carriage
Which operation is used to enlarge an existing hole to a precise diameter?
Boring
Knurling
Facing
Slotting
Which part of a lathe is responsible for holding and rotating the workpiece?
Tool post
Bed
Chuck
Tailstock
What operation is performed to reduce the diameter of a cylindrical workpiece?
Turning
Facing
Knurling
Drilling
Which tool is used to create a smooth, flat surface at the end of a workpiece on a lathe?
Boring bar
Threading tool
Parting tool
Facing tool
Which part of a milling machine moves the workpiece horizontally?
Spindle
Table
Column
Quill
What is the function of the carriage on a lathe?
To support the tailstock
To move the cutting tool along the bed
To rotate the workpiece
To hold the spindle
Which operation is performed to cut a groove along the length of a workpiece?
Slotting
Boring
Facing
Knurling
What is the main function of the bed on a lathe machine?
To hold the cutting tool
To rotate the spindle
To move the carriage
To support all major components
Which operation is performed to cut off a finished part from the remaining workpiece on a lathe?
Boring
Parting
Turning
Facing
Which axis goes left to right
x
y
z
w
Which axis goes front to back
x
y
z
w
Which axis goes up and down
x
y
z
w
what would you use to hold an irregular part in the lathe
vice
chuck
collet
your hand
what would you use to hold a cylindrical part in the lathe
vice
chuck
collet
your hand
