wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Safety and Cable Knowledge Quiz

Total questions: 51

Worksheet time: 26mins

Name
Class
Date
1.

True statement about safety precaution when working with ladder.

a)

Never stand on the top rung of the ladder you could easily lose your balance and fall

b)

Keep two hands and one foot, or two feet and one hand, in contact with the ladder at all times.

c)

This maintains stability and a firm grip, minimizing the chance of slipping or losing your balance.

d)

None of the above

2.

Why do we need to read the label on the ladder, and follow any safety instruction written on it?

a)

To avoid any damages when installing or working on the system.

b)

To control the gravity

c)

To avoid incident inside the house

d)

To maintain cleanliness inside the area

3.

Wearing safety glasses when cutting, stripping or slicing cables of any kind can

a)

Protect the hands from injury

b)

It can’t easily fly into your eye and cause injury.

c)

Controlling eye protection a necessary safety measure in these tasks.

d)

Safety glasses can affect the vision of the worker.

4.

It is the cable that is wrapped in metallic foil to better shield the wires from noise.

a)

Shielded Twisted Pair (STP) cable

b)

Unshielded Twisted Pair (UTP)

c)

Fiber Optic cable

d)

Coaxial Cable

5.

A category that supports speeds up to 1 Gbps and 100 MHz bandwidth over 100 meters. It's a common and affordable choice for home networks.

a)

Cat5e

b)

Cat6

c)

Cat6a

d)

Cat8

6.

Offers 10 Gbps speeds but is limited to 55 meters. For longer distances, it supports 1 Gbps.

a)

Cat6

b)

Cat6a

c)

Cat5e

d)

Cat8

7.

An advancement of Cat6, providing 10 Gbps speeds over 100 meters with a higher bandwidth of 500 MHz.

a)

Cat6a

b)

Cat7

c)

Cat7a

d)

Cat8

8.

Newer specifications for higher bandwidth (600 MHz) and 10 Gbps speeds.

a)

Cat7 & Cat7a

b)

Cat8

c)

Cat8a

d)

Cat6a

9.

A type of cable which is faster throughput over short distances: 40 Gbps up to 78' and 25 Gbps up to 100'. From 100' to 328', it provides the same 10Gbps throughput as Cat6a cabling.

a)

Cat8

b)

Cat6

c)

Cat7

d)

Cat5e

10.

A kind of cable which is the copper-colored cable surrounded by a heavy shielding.

a)

Coaxial cable

b)

Fiber Optic

c)

Ethernet

d)

Electrical Cable

11.

When installing internet connection, it is essential to do proper cabling. It is an ethernet cable used in local area network to connect a PC to a network hub and router.

a)

Straight-through

b)

Crossover B

c)

straight through B&A

d)

Crossover A

12.

A tool use to cut UTP cable and primary use to permanently join wires to connectors or other wires by deforming the connector onto the wire, creating a strong, reliable, and secure mechanical connection.

a)

Crimping Tool

b)

Crossover B

c)

Scissor

d)

Crossover A

13.

The tools used for creating ethernet cables are RJ45 Crimping tools, UTP cables, and?

a)

Cable tester

b)

Wire cutter

c)

Coaxial cable

d)

Screw driver

14.

The second procedure in creating ethernet cables is to?

a)

Pinch the wire between your fingers and straighten

b)

Fold the wire before inserting to RJ45

c)

Retwisting the wire in a mixed color

d)

Separate solid wire to stripe color

15.

The last procedure in creating an ethernet cable is to?

a)

Make sure to test the cable before installing them

b)

Open the cable using cutter to avoid damage of UTP wires

c)

Insert the UTP to the RJ45 properly

d)

Remove the solid wires

16.

To make an ethernet cable, first cut into the plastic sheath about one inch from the end of the cable, then straighten the eight inner wires by untwisting and pinching them. What does this statement indicate?

a)

The statement indicates the first steps in making ethernet cable.

b)

The statement indicates the second steps in making ethernet cable.

c)

The statement indicates the last steps in making ethernet cable.

d)

None of the above.

17.

Which of the following is the straight through (T56A) color coding?

a)

SG, G, SO, D, SB, O, SBR, DR

b)

SG, SO, G, D, SB, O, SBR, DR

c)

DR, SG, SO, G, D, SB, O, SBR

d)

SG, DR, SO, G, D, SB, O, SBR

18.

Which of the following is the correct straight through (156800) Cable coding?

a)

SO, O, SG, CB, G, CBR, BR

b)

SG, SO, G, D, SB, O, SBR, DR

c)

DR, SG, SO, G, D, SB, O, SBR

d)

SG, DR, SO, G, D, SB, O, SBR

19.

A crossover cable connects two devices of the same type, such as two computers or two switches, by swapping the transmit and receive wires on one end. Crossover cable has?

a)

not same color-coding

b)

has the same color-coding

c)

has many colors combination

d)

has limited color combination

20.

Crimping tools are used to crimp, strip and ____ wires. Why crimping tool is used in networking and this process involves using the tool to securely compress the connector's metal pins onto the individual wires inside the cable, forming a strong and reliable connection for data transmission. Which statement below supports the question?

a)

It used to create Ethernet cables by attaching an RJ-45 connector to the end of an unshielded twisted pair (UTP) cable.

b)

Proper crimping also seals off the cable from moisture or air, preventing rust or corrosion over time.

c)

Crimping tools are used to cut wires for better connection.

d)

Crimping tools are used to test the cable connection.

21.

What does IP stand for?

a)

Internet Protocol

b)

Internal Process

c)

Internet Pathway

d)

Internal Protocol

22.

What does HTTP stand for?

a)

Hyper Text Transfer Protocol

b)

High Transfer Text Protocol

c)

Hyperlink Text Transfer Protocol

d)

High Text Transmission Protocol

23.

What is used to identify a device on the network?

a)

Subnet Mask

b)

IP Address

c)

Hostname

d)

Gateway

24.

What indicates the network portion of an IP Address?

a)

Gateway

b)

Subnet Mask

c)

Hostname

d)

DNS

25.

Which protocol is used to find out the IP Address of a certain network?

a)

FTP

b)

HTTP

c)

DNS

d)

SMTP

26.

Which command is used to verify network connectivity by sending small data packets to a target host and measuring the time it takes to receive a response?

a)

ping

b)

prompt

c)

enter

d)

pong

27.

Which option allows you to ping the target until you force it to stop?

a)

-S

b)

-T

c)

-P

d)

-C

28.

What is the term for manually configuring the IP Address of every host on the network?

a)

Dynamic

b)

Static

c)

Automatic

d)

Manual

29.

What class of subnet mask is 255.255.255.0?

a)

Class A

b)

Class B

c)

Class C

d)

Class D

30.

In an IP Address, the first three octets represent the network. What is the last octet called?

a)

Host

b)

Subnet

c)

Gateway

d)

Broadcast

31.

If the target ping has a 500 ms response time, what does it indicate?

a)

The speed of the connection is high

b)

The speed of the connection is low

c)

The connection is stable

d)

The connection is disconnected

32.

If you see a message "the out," what does it mean?

a)

Connection is slow

b)

No connection at all

c)

Connection is stable

d)

Connection is intermittent

33.

What is used for small networks, implemented by ISPs, for computer subscriptions?

a)

Class A

b)

Class B

c)

Class C

d)

Class D

34.

What is the black screen called that you see after typing CMD in the RUN box?

a)

Terminal

b)

Command Prompt

c)

Console

d)

Shell

35.

In changing the IP address of the network, what will you need to open?

a)

Network Adapter

b)

Internet Protocol (TCP IPv4)

c)

Router Settings

d)

Firewall

36.

Which of the following is an example of using the Ping command?

a)

Ping www.google.com - +

b)

Ping www.google.com -t

c)

Ping www.google.com -a

d)

Ping www.google.com -c

37.

If you cannot find the PC on the network, what should you do?

a)

Restart the PC

b)

Run CMD

c)

Check the router

d)

Reinstall the network driver

38.

When using a wireless connection, what is the default IP Address?

a)

192.168.1.1

b)

192.168.11

c)

192.168.0.1

d)

192.168.10.1

39.

What is a self-replicating program that is harmful to networks?

a)

Virus

b)

Worm

c)

Trojan

d)

Spyware

40.

What is attached to small pieces of computer code, software, or documents?

a)

Worm

b)

Virus

c)

Trojan

d)

Malware

41.

What is the name of a threat hidden in software that appears to do one thing but does another behind the scenes?

a)

Worm

b)

Virus

c)

Trojan

d)

Spyware

42.

In order to have good antivirus protection, what does the computer need to do?

a)

Update the antivirus

b)

Install a firewall

c)

Run a full scan daily

d)

Use a VPN

43.

Which of the following is NOT an example of antivirus software?

a)

Norton

b)

McAfee

c)

Enet

d)

Avast

44.

How much hard disk space is required (32-bit) to run Windows 7 on your PC?

a)

10 GB

b)

16 GB

c)

20 GB

d)

32 GB

45.

What is the minimum memory requirement (in MB) for Windows Server 2008 on your PC?

a)

256 MB

b)

512 MB

c)

1024 MB

d)

2048 MB

46.

What is the minimum click space requirement for Windows Server 2008 on your PC?

a)

256 MB

b)

512 MB

c)

1 GB

d)

2 GB

47.

What is the recommended RAM requirement to run Windows Server 2008 on your PC?

a)

1 GB

b)

1.5 GB

c)

2 GB

d)

4 GB

48.

What is the minimum processor speed required to run Windows 7 on your PC?

a)

800 MHz

b)

1 GHz

c)

1.5 GHz

d)

2 GHz

49.

What is the recommended processor requirement to run Windows Server 2008 on a PC?

a)

1 GHz

b)

1.5 GHz

c)

2 GHz

d)

2.5 GHz

50.

Which operating system followed Windows Vista and featured various changes from prior operating systems?

a)

Windows XP

b)

Windows 7

c)

Windows 8

d)

Windows 10

51.

What is the purpose of Windows Server in a computer network?

a)

To play multimedia files

b)

To handle network roles such as printer server, domain controller, web server, and file servers

c)

To run gaming applications

d)

To manage personal documents