wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Nail Gun Exam

Total questions: 17

Worksheet time: 17mins

Name
Class
Date
1.

Label the parts of the nail gun.

2.

Label the parts of the nail gun.

3.
Question Image

Match the following descriptions with the proper part.

a)

Fires the nails

1.

Trigger

b)

Changes tool from single fire to rapid fire

2.

Firing mode switch

c)

Connects tool to air line

3.

Air inlet

4.
Question Image

Match the following descriptions with the proper part.

a)

Pushes the nails up into the gun and allows the nails to be taken out

1.

Pusher/bypass lever

b)

Needs to be pressed for the gun to fire

2.

Safety button

c)

Prevent the nails from leaving the magazine

3.

Nail hold back spring

5.

The nail gun is going to be treated like a gun. Like a gun we... (Check all that apply)

a)

Always assume the nail gun is loaded

b)

Never point the nail gun at yourself or others

c)

Keep your fingers off the trigger unless you are ready to shoot

6.

Why should the nail gun never be used as a hammer?

a)

If the tank of the nail gun breaks the tool becomes useless.

b)

The oil can fall out of the nail gun

c)

The nails will get jammed in the nail gun.

d)

The nail gun is too heavy.

7.

When walking with the nail gun, you should... (check all that apply)

a)

Keep your finger off the trigger

b)

Keep the nail gun pointed down at the ground

c)

Hold the nail gun by the hose.

d)

Watch the hose so you dont get tripped

8.

Before using the nail gun, a drop of ​ (a)   should be placed in the air inlet.

Choose from the below words
oil
water
saw dust
nails
9.

Why is a drop of oil added to the air inlet of the nail gun?

a)

Keeps the internal parts easily moving.

b)

Keeps the nail gun hydrated.

c)

Allows the nails to move past each other more easily.

d)

Keeps the air from drying out.

10.

Air hoses come in bright colors to make them easier to see. This is needed because they can easily ​ (a)   some walking by.

Choose from the below words
trip
scare
push
pull
11.

After firing the nail gun, you need to let the tool recoil. Why?

a)

To prevent another nail from firing right after the first.

b)

To allow the nail gun to cool down.

c)

To allow the nail gun to warm up.

d)

To prevent the nails from sticking to one another.

12.

Reorder the following steps to load a nail gun.

a)

Insert nails from the rear of magazine, nails are pointing down

b)

Pull the pusher all the way down, pressing the bypass lever

c)

Once the pusher hits the back of the magazine, allow the pusher to slide the nails into the nose of the gun.

1)
2)
3)
13.

Reorder the following to unload nails from a nail gun.

a)

Disconnect from air hose

b)

Pull the pusher back, pressing the bypass lever, bring the pusher up to the nose of the tool.

c)

Slide nails to bottom of magazine, press on the nail hold back spring to allow the nails to come out of the magazine

1)
2)
3)
14.

What is the most important piece of personal protective equipment (PPE) to wear when using an air nail gun?

a)

Safety goggles

b)

Earplugs

c)

Steel-toed boots

d)

Hard hat

15.

Which of the following is a safe practice when operating an air nail gun?

a)

Holding the trigger down while moving between nailing points

b)

Using the nail gun with one hand

c)

Keeping your finger off the trigger until ready to fire

d)

Pointing the nail gun at others when not in use

16.

What should you do if you notice a jam in the nail gun while working?

a)

Continue using it until the job is done

b)

Attempt to clear the jam with the gun still connected to the air supply

c)

Disconnect the air supply before attempting to clear the jam

d)

Shake the gun vigorously to dislodge the jam

17.

In case of an emergency, such as a nail gun misfire, what is the first step you should take?

a)

Continue working and ignore the issue

b)

Disconnect the air supply immediately

c)

Call for help without taking any action

d)

Attempt to fix the gun while it is still connected