When cutting on the table saw, the operator should stand behind the workpiece.

Safety training and practice in the classroom and shop is called a “Safety Culture”.

Most accidents are preventable.

What is the term referring to when a power tool operation “fails” and the movable item “flies towards” the operator at a high rate of speed?

When ripping material on the table saw, material must be held tightly against ______.

Secure work with a ______ when possible.

Treat all injuries immediately, whether serious or not, by ______.

What is a "fence" of a power tool.

The FIRST priority when working at a machine is:

A safety device which opens the circuit by tripping a switch is called a ______.

When holding materials at the miter saw, the safety zone is:

When servicing a power tool, what is the first thing you should do?

Safety glasses only need to be worn in the shop if someone is cutting something.

Gloves should NOT be worn while operating tools that have rotating parts.

What notation should you look for when determining if a pair of glasses are ‘safety glasses’?

What PPE must be worn before entering the Construction Lab?

Rule of 3-4 refers to what when using most power tools, especially saws?

“PPE” stands for which of the following?

The person primarily responsible for your safety is ______.

The main purpose of PPE is to ______.

What is the most important PPE that should be worn while using power tools?

You can free-hand cut on the table saw if you follow safety rules.

While using the circular saw it is okay to wedge open the safety guard.

The table saw is best used for what purpose?

Relief cuts are cuts made with the band saw. They ______.

When sawing small stock, you should always use a ______.

While operating the band saw, it is a safe practice to ______.

When using the miter saw, material should be flat on the ______ and flush to the ______.

The drill press is an accurate, ______ boring or drilling machine.

Make sure the drill ______ is tight in the chuck.

When cutting on the table saw, it is important not to overreach because ______.

When cutting, the kerf should be on the waste side of the line.

Our cordless drills have a keyless chuck.

A Japanese hand saw cuts on the push stroke.

The groove left behind from a saw blade in a non through cut is called the ______.

Pliers that come to a point.

What is the difference between a rip and crosscut?

What are the two types of fundamental cuts used in Construction?

What is ¾" + ¾" = ______