Worksheets(13-15) Tool Safety and Usage Quiz
Total questions: 31
Worksheet time: 16mins
Wrenches, screwdrivers and hammers are examples of __________ tools.
Power
Mechanic
Hand
Handyman
The leading cause of accidents with hand tools is improper use of __________.
Hammers
Saws
Pliers
Screwdrivers
Tools operated electrically or by pneumatic power are classified as __________ tools.
Power
Mechanic
Hand
Handyman
Open-end, box-end, and ratchet are all __________.
Hex keys
Wrenches
Pliers
Screwdrivers
What can compressed air that is less than 30 psi be used for?
Cleaning work areas
Running machines
Dental cleaning
Leaf blowing
Power tools are more dangerous than hand tools because __________.
They are connected to a power source
Are heavier and bulkier than their hand tool counterpart
They operate at higher speeds and forces
Are by nature difficult to operate
Key steps to safe handling of gas cylinders include __________.
Store oxygen and acetylene tanks together away from other gasses
Once a cylinder is empty the cap may be discarded
Leave regulators on when moving gas cylinders so they will be ready to use quickly
Chain cylinders upright so they do not tip over
The first step in safe hand tool use is __________.
Only use a tool for its intended use
Wear the proper personal protection equipment
Be cautious using worn or damaged hand tools
Alter tools to fit a task
Remove all __________ before operating power tools.
Hats
Jewelry
Gloves
Glasses
The contents of a gas cylinder are only determined by __________.
The color of the tank
Type of service valve
Reading the cylinder label
Opening the valve and smelling the gas
Lifting equipment must be operated within its __________.
Working Load Limit (WLL)
Safe Weight Limit (SWL)
Maximum Load Limit (MLL)
Nominal Load Limit (NLL)
Forklifts, pallet jacks, and dollies are examples of __________ material handling equipment.
Automatic
Manual
Power
Local
OSHA requires forklifts be inspected __________.
Daily
Weekly
Monthly
Following any repair
__________ is the process of lifting loads using hoists and cranes.
Palletizing
Load management
Rigging
Hoisting
A __________ is a manually operated forklift.
Pallet jack
Hand truck
Pry truck
Dolly
A trained __________ is responsible for making sure no one is injured during a lift.
Loader
Rigger
Operator
Hoist master
Because the load is high and forward of the center of gravity, forklifts are prone to __________.
Rocking from side to side
Slipping on smooth flooring
Spinning wheels
Tip-overs
A __________ or skid is a raised platform that provides a load surface with clearance for forklift forks.
Pallet
Load base
Floor
Foundation
OSHA requires that a person who operates a forklift __________.
Be at least 21 years of age
Have a valid automobile driver's license
Be trained and certified
Have a commercial driver's license
The Phillips screwdriver has this type of head.
Straight
Cross-shaped
Star-shaped
Socket
What wrench is used to tighten a socket head cap screw?
Hex wrench
Hex socket wrench
Phillips hex driver
Screwdriver
What type of assembly can a threaded fastener create?
Permanent
Semi-Permanent
Both permanent and semi-permanent
Only permanent
What is best wrench to use to loosen a bolt?
Open end wrench
Socket wrench
Adjustable wrench
Box end wrench
This wrench has an L-shaped or a T-shaped handle.
Combination wrench
Backup wrench
Hex key wrench
Socket wrench
When is a fastener torqued correctly?
When the torque wrench is at set point and a click is heard while tightening the fastener.
When the torque wrench is at set point.
When a click is heard while tightening the fastener.
Exactly 1/4 turn past the click of the torque wrench.
Which wrench has speed of use as a benefit?
Socket wrench
Combination wrench
Backup wrench
Hex key wrench
To increase the torque used with a slotted screwdriver this must increase in size?
Handle diameter
Blade width
Screwdriver Shaft length
Fastener's diameter
What does dividing 1-inch by the number of threads per inch result in?
Pitch
Thread type
Class of fit
Major diameter
Threaded fasteners are popular because they create this type of assembly.
Permanent
Semi-Permanent
Semi-strong
Disassemble
This wrench is used to hold a fastener in place.
Combination wrench
Backup wrench
Hex key wrench
Socket wrench
Thru holes pass through the part. What is a blind hole?
Goes through a part and has threads
Does not go completely through a part
Has thread only in part of the hole
Goes through the part
