NEW
Font size
WorksheetsCosmetology and Hair Color Quiz
Total questions: 15
Worksheet time: 8mins
What is the crucial FIRST step a cosmetologist must take before cleaning an electric thermal iron?
Apply a professional iron cleaner.
Unplug the iron and allow it to cool.
Wipe it with a damp cloth.
Loosen hair strands with a comb.
Why is it important to ensure a thermal iron is completely unplugged before starting the cleaning process?
To prevent product residue from hardening.
To comply with TDLR rules for implement storage.
To ensure electrical safety and prevent burns or shock.
To allow the cleaning agent to penetrate the surface.
What type of liquid should generally NOT be used to clean the plates or barrel of a thermal iron?
Warm water.
Rubbing alcohol.
Harsh cleaners or countertop sprays.
Professional iron cleaner.
The most effective way to remove sticky product buildup (like hairspray or gel) from the barrel of a cool thermal iron is to:
Wipe it down with a clean, slightly damp cloth or a cloth dipped in a mild cleaning solution (like diluted shampoo).
Submerge the entire iron in a disinfectant solution for 10 minutes.
Scrape the buildup off with a metal file.
Run the iron under a high-pressure stream of hot water.
For heavy, hard-to-remove product residue on a thermal iron, what method is often recommended?
Heating the iron to its highest setting and wiping it dry.
Soaking the iron in an alkaline permanent wave solution.
Wiping the barrel with a damp cloth while the iron is on the lowest heat setting (or slightly warm).
Applying a high-level chlorine bleach solution.
After cleaning the iron with a damp cloth and mild solution, the next crucial step before storage or use is to:
Apply oil sheen or silicone spray to condition the barrel.
Wipe the iron completely dry with a clean, dry towel.
Heat the iron to its highest setting for sterilization.
Apply a coat of base cream to the handle.
Electric thermal irons, which cannot be immersed in liquid, must be cleaned and disinfected after each client by:
Wiping them clean with a towel and spraying with an EPA-registered disinfectant or alcohol.
Soaking only the barrel in a high-level disinfectant.
Cleaning the handle but not the barrel.
Wiping with a dry paper towel only.
Why is using a harsh, abrasive cleaner or a baking soda paste discouraged for thermal irons with ceramic or tourmaline plates?
It requires too much scrubbing time.
It can damage, scratch, or compromise the integrity of the plate's finish.
It leaves a white film that is difficult to remove.
It will cause the electrical cord to crack.
According to general salon safety and TDLR principles, how should all clean and disinfected implements, including thermal irons, be stored when not in use?
Hung on a hook near the styling station.
On a clean shelf next to the disinfectant containers.
In a clean, dry, debris-free environment, separate from soiled implements.
Wrapped loosely in a towel on the countertop.
When performing thermal curling in the practical exam, what is the proper safety procedure immediately after finishing the curling section?
Put the hot iron in a bucket of cool water.
Unplug the marcel iron and wrap it in a towel or cover before packing it away.
Leave the iron plugged in to keep it ready for the next client.
Clean the iron using soap and water immediately.
The darkest primary color is:
Red
Yellow
Blue
Green
Mixing equal parts of a primary color and its neighboring secondary color on the color wheel results in a:
Primary color
Secondary color
Complementary color
Tertiary color
Colors positioned directly opposite each other on the color wheel are called:
Base colors
Tertiary colors
Opposing colors
Complementary colors
The color principle used to neutralize unwanted warmth (e.g., yellow) in the hair is achieved by selecting its complementary color, which is:
Red
Green
Violet
Blue
On the hair color level system, what number represents the lightest hair color level?
1
5
10
12
