Worksheets40qq
Total questions: 40
Worksheet time: 20mins
What is the purpose of a working drawing?
To show decorative colours
To provide detailed construction information
To assess environmental impact
To record site accidents
Which document shows the dimensions and layout of a building?
Risk assessment
Method statement
Floor plan
Delivery note
Which of the following is a specification?
A detailed list of materials and standards required
A health & safety poster
A site diary
A design sketch
Why are scale drawings used?
To reduce the number of pages
To show a building at a measured ratio
To add colour to plans
To make drawings harder to copy
Which document identifies hazards and control measures?
Cutting list
Risk assessment
Purchase order
Time sheet
What is the main purpose of insulation?
To make buildings heavier
To reduce heat loss and improve efficiency
To support structural loads
To replace damp-proofing
Sustainability in construction means...
Using the cheapest materials
Selecting materials with minimal environmental impact
Avoiding recycled products
Ignoring waste disposal
Which material is commonly recycled in construction?
Plasterboard
Concrete
Timber
All of the above
A permeable surface is used to...
Increase water runoff
Allow water to soak through
Strengthen foundations
Reduce building noise
What is the purpose of a site waste management plan?
To record worker breaks
To manage and reduce waste
To plan the building layout
To monitor air quality
What is the purpose of foundations?
To decorate a building
To distribute loads safely into the ground
To hold roof tiles in place
To support internal walls only
What does ‘ground bearing pressure’ refer to?
Weight of the roof
Strength of the timber frame
Load the soil can safely support
Pressure of the wind
A trench fill foundation is...
A shallow concrete slab
A deep concrete pour to reduce brickwork
Used only on sloping sites
Made of timber
Which foundation is typically used for poor-quality ground?
Strip foundation
Raft foundation
Pad foundation
Pier foundation
DPC stands for...
Damp Proof Course
Drainage Pressure Control
Direct Planning Certificate
Double Panel Concrete
What is the purpose of a cavity in a cavity wall?
To store wiring
To reduce weight
To prevent moisture penetrating inside
To increase thickness
Which material is commonly used for wall ties?
Timber
Plastic
Stainless steel
Plaster
A partition wall is...
A load-bearing wall
A wall dividing internal spaces
An external structural wall
A retaining wall
What is the purpose of a lintel?
To support loads over openings
To decorate the doorway
To join two walls together
To strengthen the roof
A wall plate is fixed
Beneath a floor
On top of supporting walls to carry roof timbers
Inside cavity insulation
On the outside of the building
A suspended timber floor is used when
Ground is uneven or moisture-prone
The building is multi-storey
Concrete is unavailable
Noise reduction is not required
What is the purpose of joists?
To hold insulation
To support floorboards or decking
To make decorative ceilings
To reduce building height
Which material is common for a solid ground floor?
Timber
Concrete
MDF
Plastic sheeting
A damp-proof membrane in a solid floor prevents
Heat loss
Moisture rising
Structural cracking
Accidental trip hazards
What is a screed?
A type of insulation
A thin cement layer for levelling floors
A timber support beam
A waterproof coating
A pitched roof is
A flat roof
A roof with angled slopes
A metal-only roof
A roof without insulation
The main horizontal member at the base of a roof truss is the
Rafters
Tie beam
Ridge board
Wall plate
What does a ridge board do?
Supports ceiling joists
Forms the top line where rafters meet
Provides ventilation
Supports roof tiles
What is the purpose of roofing felt?
Decorative finish
Waterproof under-layer
Insulation
Fire protection
A flat roof typically requires
No drainage
A minimum fall for water runoff
Heavy roof tiles
Guttering only
Why is verbal communication important on site?
It avoids paperwork
It supports quick, clear instructions
It is legally required
It replaces signage
A site induction provides
Social activities
Safety information for new workers
Payment details
Training on tools
Which is an example of non-verbal communication?
Hand signals
Phone call
Toolbox talk
Why must construction workers follow written instructions?
They are optional guidelines
They ensure accuracy and compliance
They can be ignored if busy
They replace supervision
A toolbox talk is used to...
Report injuries
Discuss daily safety topics
Teach carpentry skills
Replace formal training
Why is research important in construction?
To find social events
To keep up with regulations and materials
To reduce communication
To avoid using drawings
Which source is best for checking product performance?
Social media
Manufacturer's data sheet
Worker opinions
Verbal instructions only
A method statement describes...
Tool storage
How a job will be safely carried out
Who is working that day
Weather conditions
Which of the following helps solve construction problems?
Guessing
Ignoring instructions
Referring to technical drawings
Using random materials
When researching regulations, the best source is...
Outdated textbooks
Certified industry guidance or government documents
TV adverts
Personal blogs
