WorksheetsTraining Quiz
Total questions: 20
Worksheet time: 11mins
user name and password of the iE250 controller in offline
admin , admin
Admin, Admin
Admin, 0
Admin , 1
Username and password of the iE250 controller in online
Admin,admin
admin,admin
Admin,0
0,Admin
Oil pressure alarm will be inhibit when
Engine is not running
Engine is running
Engine is cranking
Engine is in idle
When oil pressure alarm/activated is activated
Oil pressure goes high
Oil pressure goes low
Oil pressure goes low below setpoint
Oil pressure goes low below setpoint during running
When coolant temperature alarm activated
When temperature goes high
when temperature goes high above setpoint
when temperature goes high above setpoint during running
whentemperature goes above 105 degree
Which function need to enable for the fault input
Trip generator
Shutdown the engine
Trip generator breaker and shutdown the engine
warning
Sensor value set for the controller
0-20ma
0-10V
4-20ma
0-5V
oil pressure range for 4-20ma
0-5bar
4-20ma
0-10bar
0-10V
Triger level for oil pressure to set as
Low
High
Medium
very high
Triger level for temperature set as
low
high
Medium
Very high
Analog input 4-20 ma set it in
in Sensor value
in table
in scaling
in graph
Scaling of the analog input 4-20ma and 0-10bar set it in
sensor value
in table
scaling chart
sensor chart
Plug in module are
AIO2.1
DIO2.1
AIO2.1 and DIO2.1
MIO2.1
Controller I/O module is
AIO2.1
MIO2.1
DIO2.1
DO2.0
Exhaust temperature warning will enable
>550
>500
<500
<400
Trigger level function is set in
Auto acknowledge
Latch
Suppress action
toggle
Back up is taken from which menu
Tools
Configure
alarms
log
IP of the controller
192.168.2.110
192.168.2.100
192.168.2.120
192.168.2.200
Oil temperature warning will be activated
>100
>110
<115
>115
Fuel pressure sensor range
6bar
0-6 bar
0-10bar
10bar
