WorksheetsHand Planes and Types of Planes – Multiple Choice Quiz
Total questions: 20
Worksheet time: 10mins
What is the primary purpose of a bench plane?
Cutting curves
Smoothing and flattening wood surfaces
Cutting mortises
Sharpening tools
Which part of a hand plane holds the blade at the correct angle?
Sole
Frog
Tote
Knob
What is another name for the blade in a plane?
Iron
Frog
Sole
Mouth
What determines the size number of a bench plane?
The width of the blade
The length of the plane
The thickness of the sole
The type of wood used
Which plane is best suited for trimming end grain?
Jack plane
Jointer plane
Block plane
Smoothing plane
The mouth of a plane is...
The handle
The opening where the blade protrudes
The screw that holds the iron
The sole's edge
What is the correct term for adjusting the blade sideways to ensure an even cut?
Depth adjustment
Lateral adjustment
Bevel setting
Honing
Which plane is typically the longest?
Block plane
Jack plane
Jointer plane
Smoothing plane
A low-angle block plane is especially useful for...
Rough stock removal
Cutting dovetails
Working with end grain
Planing long boards
What material is traditionally used for the sole of older hand planes?
Steel
Cast iron
Brass
Hardwood
What is the role of the cap iron (chip breaker)?
Ensures a smooth grip
Reduces tear-out
Strengthens the sole
Adjusts blade depth
Which plane is best for flattening the face of a long board?
Block plane
Jointer plane
Bullnose plane
Router plane
The tote on a hand plane refers to the...
Blade
Front knob
Rear handle
Sole
What happens if the blade is set too deep?
Very fine shavings
No shavings
Chatter or digging in
More accurate planing
Which plane is designed to clean up tenons and rebates?
Block plane
Shoulder plane
Jack plane
Smoothing plane
The bevel of the plane iron typically faces which direction in a bench plane?
Up
Down
Left
Right
What is the purpose of the adjuster wheel?
Changes the width of cut
Adjusts blade depth
Sharpening the blade
Tightens the tote
A jack plane is mainly used for...
Final smoothing
Heavy stock removal
Cutting joints
Working end grain
A smoothing plane is typically used...
First
Last
Only on softwoods
Only for jointing edges
Which plane would you use to level the bottom of a groove or dado?
Router plane
Block plane
Jack plane
Smoothing plane
