WorksheetsPage 1
Total questions: 150
Worksheet time: 1hrs 15mins
Which front panel LED status indicates the router’s power is turned on?
Power LED off state
Power LED solid on
System LED flashing
WLAN LED off state
What does a flashing System LED typically mean on the router’s front panel?
Firmware update failed
Router working properly
Wireless radio disabled
Power supply overheating
If the WLAN LED is off, what is the most likely condition?
System error currently resolved
Router has an Internet connection
Router not connected to any wireless device
Power cycle just completed
You see the System LED solid on and not flashing. What should you infer first?
The router has a system error
Wi‑Fi clients are connected
Power is currently off
WAN link is established
Which step best aligns with the learning objective stated for this sheet?
Repair damaged Ethernet cables
Assemble a desktop computer
Identify ISP billing cycles
Properly configure router device
A student wants to verify the router is powered. Which single action confirms it using the front panel?
Press the reset button repeatedly
Look for System LED solid
Observe WLAN LED blinking
Check if Power LED is solid on
During setup, the System LED flashes continuously. What is the appropriate next step?
Proceed with configuration tasks
Disconnect all wireless clients
Replace the power adapter immediately
Disable the router’s WLAN feature
When no wireless devices are connected, which LED behavior is expected?
System LED solid on
WLAN LED flashing rapidly
WLAN LED off state
Power LED blinking quickly
Which description correctly matches the router LED labels shown from left to right on the front panel illustration?
Power, System, network ports, WLAN, lock
WLAN, System, Power, lock, ports
System, lock, WLAN, ports, Power
Lock, ports, Power, WLAN, System
If the router’s power LED is off while connected to power, which troubleshooting action is most reasonable first?
Update router firmware immediately
Change wireless security settings
Assign static IP to clients
Verify outlet and adapter connection
When the router’s wireless LED is On, what does it indicate?
Router updating firmware automatically
Router resetting to factory defaults
Router searching for nearby networks
Router connected to wireless device(s)
What does a Flashing wireless LED on the router mean?
No device is linked to wireless
Data is being transferred wirelessly
WPS pairing has completed
Router is powered off entirely
If a LAN port LED is Off, what is the most accurate status?
Port is disabled by firmware
No device linked to the port
Device linked but idle
Active device transferring data
A LAN port LED is On without flashing. What does this suggest?
Port failure requiring reset
High throughput data transfer
Cable disconnected entirely
Device linked with no activity
During WPS pairing, the WPS LED shows a Slow Flash. What is happening?
Device is connecting via WPS
Router is restoring WPS settings
Device failed to add by WPS
WPS pairing already completed
After successful WPS addition, what is the WPS LED state?
On steadily
Quick flashing
Slow flashing
Completely off
If the WPS LED shows Quick Flash, what should you infer?
LAN cable is unplugged
Router battery is low
WPS session still pending
WPS add attempt failed
After a device is added by WPS, how long will the WPS LED remain on before turning off?
About five minutes
About thirty seconds
About one minute
About fifteen minutes
On the rear panel, what is the function of the WIFI button?
Toggle power to the router
Switch between WAN and LAN ports
Enable or disable wireless function
Start factory reset procedure
Which action uses the WPS/RESET button to restore factory settings?
Hold for two seconds until power LED turns off
Press and hold over five seconds until SYS LED quick-flashes
Tap the button once while the router is off
Double-press within three seconds while rebooting
What does pressing the WPS/RESET button for less than five seconds typically do?
Turns off the wireless radio globally
Disables all LAN ports temporarily
Erases current admin password
Starts WPS for quick client pairing
Which menu path performs a software reset to factory defaults?
System Tools then Factory Defaults page
Wireless Settings then Basic Security
Advanced Routing then NAT Control
Maintenance then Firmware Upgrade
During a hard reset, which LED behavior indicates the process started?
Internet LED blinks red three times
LAN1 LED cycles through all ports quickly
WLAN LED turns solid green without blinking
SYS LED changes from slow-flash to quick-flash
What is the primary purpose of WPS when used correctly?
Establishes secure connection between router and clients
Allocates bandwidth priority to streaming apps
Extends wireless range to distant rooms automatically
Backs up configuration to a USB drive
Which port connects the router to the DSL/cable modem?
Console port under the base
USB service port on the rear
LAN4 port closest to power
INTERNET port labeled WAN
The LAN ports labeled 4,3,2,1 are used to connect which devices?
Power adapters and chargers
Bluetooth speakers directly
External modems only
Local PCs and wired clients
Which component is the main power control for the router?
LAN1 port with PoE capability
Wi‑Fi toggle button on the top
Reset hole beside the WAN port
ON/OFF switch near the power socket
For power, where should the adapter be connected?
Power socket on the router’s rear panel
Any available LAN port labeled 1–4
The Internet/WAN port for input power
WPS/RESET button with long press
Which is a listed system requirement before connecting the router?
Fiber SFP module installed in router
A laptop with built‑in cellular modem
Two separate modems for redundancy
Broadband Internet service such as DSL, Cable, or Ethernet
What connector type is required on the DSL/Cable modem for direct router connection?
RJ45 Ethernet connector
RJ11 phone connector
USB Type‑C connector
Coaxial F‑type connector only
Which PC hardware is necessary for a wired setup?
Wi‑Fi 6 card and antenna kit
Bluetooth adapter with pairing mode
Working Ethernet adapter and RJ45 cable
Serial adapter and null‑modem cable
Which operating temperature range is recommended for a wireless router placement?
−5°C to 35°C, occasional condensation
10°C to 50°C, direct sunlight allowed
15°C to 60°C, well‑ventilated only
0°C to 40°C, non‑condensing environment
What minimum clear space should be kept around a router for ventilation?
3 inches (7.5 cm) of space
6 inches (15 cm) of space
2 inches (5 cm) of space
1 inch (2.5 cm) of space
Where should you place the router relative to heaters or heating vents?
Far from any heater or heating vent
Two feet from any heater
Directly above a heating vent
Next to the warmest room corner
Which light condition should be avoided when installing a router?
Soft ambient daylight indoors
Direct irradiation of strong light
Low‑intensity LED indicators
Indirect lamp lighting at night
What operating humidity is acceptable for the router according to the requirements?
0%–50% RH, condensing allowed
5%–95% RH, occasional condensation
10%–90% RH, non‑condensing
20%–80% RH, mild condensation
Before connecting the router, which devices should be powered off first?
PC, Cable/DSL Modem, Router
PC, Printer, Router
Cable/DSL Modem, ISP server, PC
Switch/Hub, Router, UPS
When choosing a location for the router, what spot is recommended for best coverage?
At the center of your wireless network
Close to the main door
Inside a closed cabinet
Near a window facing outdoors
To connect the internet source, which router port should the Cable/DSL modem attach to?
Power adapter jack
WAN port on the router
USB service port
LAN port on the router
If your PC has a wireless NIC and you plan to use wireless, what step can you skip?
Powering on the Cable/DSL modem
Connecting modem to the WAN port
Locating an optimum router position
Wiring PCs to the LAN ports
After plugging the power adapter into the router and an electrical outlet, what happens next?
It requires manual firmware loading
It waits for ISP activation
It starts to work automatically
It starts after pressing the reset key
Which port on the router connects to the ADSL modem to provide Internet access?
The power adapter socket
The WAN/Internet port
The USB maintenance port
One of the numbered LAN ports
What is the correct cable path to provide network access to a single PC in the diagram?
Power to WAN, PC to modem
PC to WAN, power to LAN
ADSL modem to WAN, PC to LAN
ADSL modem to LAN, PC to WAN
Before configuring the router, what hardware step must be completed to power the device?
Plug PC into WAN port
Enable DHCP on PC
Connect modem to LAN port
Attach power adapter to wall
In Figure 2-1, which ports are intended for local devices like PCs or switches?
INTERNET/WAN port only
ADSL modem port
Numbered LAN ports
Power adapter socket
If the PC is plugged into the WAN port instead of LAN, what immediate symptom is most likely?
Internet works but LAN is isolated
Power adapter overheats quickly
PC receives an IP from the router
No local network connectivity
Which installation method is illustrated for attaching the router to a wall?
Adhesive pad mounting only
Ceiling tile suspension
Magnetic bracket mounting
Screw-based wall mounting
According to the wall-mount diagram, what should be checked to ensure proper fit?
LAN port throughput rating
Screw head diameter and spacing
Router MAC address format
Firmware version number
For basic single-PC setup, which sequence is correct after cabling?
Power router, boot PC, power modem
Power modem, boot PC, power router
Boot PC, power modem, power router
Power router, power modem, boot PC
What component provides the upstream Internet connection in this setup?
Wireless access point
ADSL modem device
LAN switch stack
PC network card
When wall-mounting, where should the ventilation area be left unobstructed?
Under the screw heads
Around the mesh center panel
Behind the power adapter
Near the WAN port label
Which default IP address is used to access the TL-WR840N router from a connected PC?
192.168.0.1
192.168.1.1
172.16.0.1
10.0.0.1
What is the default subnet mask mentioned for the router’s LAN network?
255.255.0.0
255.255.255.0
255.255.254.0
255.0.0.0
When configuring a PC manually, which gateway address should be set to reach the router?
10.0.0.254
192.168.0.1
192.168.0.254
192.168.1.1
In manual IP setup, which range is valid for the host portion when using 192.168.0.xxx on the PC?
0 to 253
3 to 252
2 to 254
1 to 255
Which built-in service assigns an IP address automatically to the PC when set to obtain an address automatically?
NAT translator
DHCP server
DNS resolver
PPP client
Which domain name is provided as the default for accessing the router’s web interface?
myrouter.local
tplinklogin.net
routerlogin.net
tplinkwifi.net
Which command should be run in Windows to verify connectivity to the router?
ping 192.168.0.1
netstat -an
ipconfig /all
tracert 192.168.0.1
If the PC is set to obtain an IP automatically, which TCP/IP setting mode must be enabled?
Use the following IP address
Bridge network adapter manually
Disable IPv4 protocol entirely
Obtain an IP address automatically
Which protocol stack must be set up on the PC before assigning IP parameters?
SMTP Protocol
SNMP Protocol
FTP Protocol
TCP/IP Protocol
After a successful ping to 192.168.0.1, what does the result indicate about the PC and router?
Network connection established well
Router firmware update required
Internet access is guaranteed
Wi‑Fi signal is weak and unstable
Which command-line tool is shown verifying connectivity to 192.168.0.1?
ipconfig utility for listing adapters
tracert utility for hop tracing
ping utility for echo requests
netstat utility for socket states
In a successful ping to a router, which result indicates no packet loss?
Packets: Sent = 4, Received = 2
Packets: Sent = 4, Received = 3
Packets: Sent = 4, Received = 4
Packets: Sent = 4, Received = 0
What default gateway address is being tested in the screenshots?
10.0.0.1
192.168.1.254
172.16.0.1
192.168.0.1
Which failure message suggests the router is powered off or disconnected?
Request timed out repeatedly
Approximate round trip time average 0ms
Reply from 192.168.0.1: bytes=32
Destination host unreachable
Which failure output indicates the local NIC or TCP/IP stack has a problem?
Replies with TTL=64 entries
PING: transmit failed. General failure
Ping statistics show 0% loss
Destination host unreachable text lines
If ping shows Sent = 4, Received = 0, Lost = 4 (100% loss), what should you check first?
Browser proxy configuration
Router power and cabling status
Printer queue and drivers
Email client server settings
Which line confirms a successful echo reply from the router?
Destination host unreachable on all attempts
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Ping statistics show Lost = 4 (100% loss)
PING: transmit failed. General failure
What does TTL=64 in the reply indicate in this context?
Hop limit value set by router
Total latency in milliseconds
Size of ICMP payload bytes
Number of packets transmitted
If the output matches the failure screenshot, what conclusion is stated about the PC-router connection?
Router DNS server is functioning
Internet service provider is offline
Wireless signal strength is excellent
Connection between PC and router failed
Which summary metric reports average time for echo replies?
Destination host unreachable text
Packets counters section
Approximate round trip times
Transmit failed general failure note
When checking the physical connection to a router, what indicates a proper link between the PC and router?
Wi-Fi LED solid without LAN activity
Only WAN LED blinking intermittently
Power LED lit but LAN LEDs off
LAN port LEDs and PC adapter LEDs lit
A router has default LAN IP 192.168.0.1. Which IP range should the PC use for proper TCP/IP configuration?
192.168.1.2 to 192.168.1.254
192.168.0.2 to 192.168.0.254
10.0.0.2 to 10.0.0.254
172.16.0.2 to 172.16.0.254
Which item should you verify as step 3 before configuring the router?
Default LAN IP of the router is correct
SSID broadcast is disabled
WAN DHCP lease is renewed
Firewall rules are applied
Which operating systems can use the web-based utility for the TL-WR840N router?
Linux only
Windows, Macintosh, UNIX
Macintosh only
Windows only
Which browsers are mentioned as compatible for accessing the router utility?
Brave, Vivaldi, Tor
Only Chrome
Safari, Opera, Edge
Internet Explorer, Firefox, Chrome
To open the router configuration utility, what address should be typed in the browser?
Default gateway address
Any HTTPS website URL
Public DNS server address
Router’s WAN IP address
In the command output shown, which field reveals the address to use for the router’s web utility?
IPv4 Address
Default Gateway
Subnet Mask
DNS Suffix
If your PC’s IPv4 address is 192.168.0.100 and subnet mask is 255.255.255.0, which default gateway should appear?
192.168.1.1
10.0.0.1
192.168.0.1
192.168.0.254
What is the first step recommended before accessing the web-based utility?
Disable antivirus software
Update router firmware
Change wireless encryption type
Verify PC-router connection LEDs
Which statement best describes the purpose of typing 192.168.0.1 into the browser?
Test DNS resolution performance
Open router’s configuration interface
Access a remote web server
Connect to the internet directly
Which username should be entered on the router login page shown?
admin
user
root
guest
What case format is required for both username and password during initial login?
Mixed case letters
Title case letters
Lower case letters
Upper case letters
After entering credentials, which action proceeds with logging in to the router?
Open a new window
Click OK or press Enter
Press Tab key
Refresh the page
After successful login, which menu lets you quickly configure the router?
Advanced Settings
Maintenance
Quick Setup
Security Center
In the Quick Setup screen, which button continues configuration?
Exit
Save
Back
Next
Which page appears after clicking Next in Quick Setup?
WAN Connection Type
Firmware Update
Wireless Channel Select
LAN IP Settings
What message is shown near the router URL during login regarding connection security?
Two-factor authentication enabled
Certificate is trusted by authority
Connection to this site is not private
Site is fully encrypted
Which URL is displayed in the login page example?
http://10.0.0.1
http://192.168.0.1
http://172.16.0.1
http://192.168.1.1
Which buttons are visible on the Quick Setup dialog?
Back and Continue
Cancel and Apply
Exit and Next
Save and Close
Which sequence describes the Quick Setup flow shown?
Start >> Security >> Firewall >> Finish
Start >> LAN >> DHCP >> Finish
Start >> Administration >> Logs >> Finish
Start >> WAN Connection Type >> Wireless >> Finish
Which WAN connection option lets the router identify the ISP connection automatically during Quick Setup?
Static IP using fixed address
PPPoE link using ADSL modem
L2TP tunnel with ISP credentials
Auto-Detect mode for ISP connection
Which WAN type typically requires a username and password provided by the ISP and is common with ADSL modems?
Dynamic IP via DHCP server
PPPoE authentication with ADSL
L2TP tunnel using ISP
Static IP with fixed address
For cable modem users, which WAN setting allows the router to obtain an IP automatically?
PPTP manual server entry
Static IP from ISP sheet
Dynamic IP through DHCP
PPPoE with account login
Which option is best when you already know the exact connection type assigned by your ISP?
Reset router to factory defaults
Skip WAN setup entirely
Always use Auto-Detect mode
Manually select the specific type
What happens after the router successfully detects an active Internet service?
Wireless radios are disabled
Router reboots automatically
Appropriate configuration page displays
L2TP is forced as default
Which WAN type uses a permanent, fixed address assigned by the ISP?
PPPoE over ADSL modem
PPTP with password login
Dynamic IP obtained automatically
Static IP with fixed assignment
When setting up L2TP or PPTP, what is typically needed from the ISP?
Account name and password
Public DNS records list
Port forwarding templates
MAC address registration
After clicking Next in Quick Setup following WAN detection, which settings page is expected to appear next?
Firewall rule creation
Wireless settings configuration
Parental control filters
LAN subnet adjustments
Why is using Auto-Detect recommended for most users during WAN setup?
Prevents ISP throttling policies
Increases router CPU frequency
Improves Wi‑Fi signal strength
Reduces manual configuration errors
Which setting enables or disables the router’s Wi‑Fi transmission?
Channel Width configuration menu
Region selection drop‑down list
Wireless Network Name field (SSID)
Wireless Radio toggle in settings
What does SSID stand for in a wireless network?
Shared SSID Information Data
Station Service Identifier
Secure Signal Interface Descriptor
Service Set Identification
Which statement about SSID case sensitivity is correct?
TEST and test are different names
Only numbers are case sensitive
Case is ignored for default SSIDs
TEST and test are identical names
Why must the Region be selected from the router’s wireless settings?
To improve router processor speed
To enable parental control features
To comply with local radio laws
To match ISP billing region
What does the default SSID TP‑LINK_XXXXXX represent?
Country code plus channel
Firmware version identifier
Random six‑digit password code
Last six digits of router MAC
Which wireless security option should be chosen to require a passphrase?
WPA‑PSK/WPA2‑PSK mode
Disable Security option
No Change radio button
Auto Channel Width setting
What is the allowed length for a PSK passphrase on this router?
Up to 64 Unicode characters
Exactly 12 hexadecimal characters
Between 8 and 63 ASCII characters
Between 6 and 16 alphanumeric symbols
If your country is not listed in the Region menu, what should you do?
Contact local government agency
Select United States as default
Disable wireless radio entirely
Change channel width to Auto
Which mode combines support for 11b, 11g, and 11n devices?
11bgn mixed operating mode
11n‑only high‑speed mode
802.11ac compatibility mode
Legacy 11b isolated mode
Why should all wireless devices use the same SSID in a network?
To increase antenna gain value
To join the same wireless network
To reduce electrical power usage
To change router MAC address
Which setting lets the router choose the best operating frequency automatically?
Mode set to WPA2-PSK
Channel set to Auto mode
Channel Width set to Manual
PSK Password using ASCII
What is the default behavior of Channel Width according to the quick setup?
Disabled during setup
Automatic adjustment for clients
Fixed at 20 MHz only
Requires manual selection
Disabling Security results in which outcome for wireless stations?
Connect without encryption
Force hexadecimal passkeys
Require WPA2 reauthentication
Block all SSID broadcasts
Which option enables security based on a pre‑shared passphrase?
WPA‑PSK/WPA2‑PSK
Disable Security option
Automatic Channel mode
No Change selection
For ASCII PSK passwords, what characters are allowed?
Binary digits 0 and 1 only
Uppercase letters A–F only
Emoji and symbols only
Numbers 0–9 and letters A–Z
What is the required length range for an ASCII PSK password?
4 to 12 characters
8 to 63 characters
32 to 128 characters
16 to 64 characters
For hexadecimal PSK passwords, which statement is correct?
Use 0–9 and A–F with length 8–64
Use A–Z with length 4–16
Use any Unicode characters length 1–32
Use digits only length 10–50
Why is it recommended to write down the PSK key after configuration?
To disable SSID broadcast
To force automatic channel selection
To keep track of related settings
To improve wireless throughput
Selecting No Change for wireless security will have what effect?
Existing security settings remain
Router resets the passphrase
Channel width becomes fixed
Router disables encryption
Which message appears on the Finish page during Quick Setup?
WPA2‑PSK configuration failed
Channel width set to automatic mode
Security has been disabled successfully
Router is now connecting you to the Internet
On the Quick Setup Finish page, what action makes wireless configuration changes take effect?
Press Reboot to restart router
Toggle Wi‑Fi off then on
Wait for auto-apply settings
Click Back to return and save
The Finish page message states the router is now connecting to the Internet. What should you do next if you need additional settings?
Click other menus for details
Disable DHCP immediately
Reset router to defaults
Disconnect WAN cable first
According to the Finish page notice, what will NOT happen until the router reboots?
Wireless config changes apply
Internet connection establishes
Admin password changes save
LAN IP address updates
Which button returns you to previous steps without applying changes yet?
Menu
Finish
Back
Reboot
Why might the setup wizard present a Finish page after modifying wireless settings?
To start firmware auto‑update
To disable firewall temporarily
To signal need for router reboot
To confirm ISP plan upgrade
In a quick setup scenario, what is the safest sequence to finalize Wi‑Fi changes?
Reboot, modify, save again
Verify, skip reboot, power off
Modify, disconnect, reconnect
Save, Reboot, verify connectivity
After pressing Reboot on the Finish page, what outcome should you expect?
Unsecured guest network
Permanent SSID deletion
Temporary Wi‑Fi downtime
WAN MAC address change
If wireless changes do not appear after setup, which troubleshooting step aligns with the Finish page guidance?
Restart the router
Clear browser cache
Move closer to router
Renew PC IP lease
The message states, "Congratulations! The Router is now connecting to the Internet." What does this imply about WAN status before reboot?
Cable is disconnected
WAN IP is unreachable
WAN link is established
PPPoE is misconfigured
When finishing quick setup, which menu option specifically triggers applying pending wireless configuration?
Back button click
Status page refresh
Reboot button press
Help menu open
In Windows 10, which keyboard shortcut opens the Run dialog needed to start network configuration?
Windows logo + R
Ctrl + Alt + R
Windows logo + E
Alt + Shift + R
After opening the Run dialog, which command should be typed to open Network Connections?
ncpa.cpl
devmgmt.msc
netcfg.msc
ipconfig.exe
On the Network Connections window, what is the next action to access adapter settings?
Press F5 to refresh list
Open System Properties panel
Double-click Control Panel
Right-click the Ethernet adapter
Which menu choice should be selected after right-clicking the Ethernet adapter to change TCP/IP settings?
Properties
Disable
Diagnose
Rename
Before configuring TCP/IP, what prerequisite is recommended for the Ethernet adapter?
Install a wireless printer
Ensure the adapter is working
Update Windows Defender
Enable airplane mode
Which Windows version is referenced for the procedure to configure TCP/IP components?
Windows 8.1 Update
Windows 11 23H2
Windows 7 Service Pack 1
Windows 10 Version 1809
The Realtek PCIe GbE Family Controller shown indicates what type of network adapter?
Virtual modem adapter
Wireless USB adapter
Wired Ethernet adapter
Bluetooth PAN adapter
Which panel path displays the Network Connections list where adapters can be managed?
File Explorer > This PC > Devices
Settings > Update & Security > Network Reset
Control Panel > Network and Internet > Network Connections
Task Manager > Performance > Networking
Selecting Properties for the Ethernet adapter primarily allows configuration of which protocol settings?
DNS root hints
DHCP server roles
FTP and SMTP
TCP/IPv4 and TCP/IPv6
When the Ethernet adapter shows 'Disable this network device' available, what does this imply about its current state?
The adapter is in airplane mode
The adapter is enabled and active
The adapter is uninstalling drivers
The adapter is disabled and offline
Which setting enables a computer to receive its IP address from the router without manual entry?
Use static IP configuration manually
Obtain an IP address automatically
Disable the network adapter entirely
Assign IP via manual DHCP reservation
In the Ethernet Properties window, which item should you open to configure IPv4 addressing?
Link-Layer Topology Discovery
QoS Packet Scheduler
Microsoft LLDP Protocol Driver
Internet Protocol Version 4 (TCP/IPv4)
What companion setting should be selected to automatically resolve website names when using automatic IP configuration?
Use custom DNS server addresses
Set DNS suffix manually
Choose Obtain DNS server automatically
Disable DNS Client service
After double-clicking TCP/IPv4 in Ethernet Properties, what typically opens next?
TCP/IP Properties dialog window
Adapter hardware diagnostics window
Advanced firewall settings panel
Router administration webpage
Which tab is open by default in the TCP/IP Properties dialog when configuring IPv4?
Advanced WINS settings tab
Sharing and Security tab
IP Address tab in Properties
Alternate Configuration tab
Why might a user prefer automatic IP and DNS settings on a home router?
Allows manual subnet mask selection
Prevents DHCP from assigning leases
Simplifies setup and reduces errors
Ensures fixed static addressing always
Which protocol in Ethernet Properties handles addressing for most local networks today?
Internet Protocol Version 6 (TCP/IPv6)
Bridge Driver for LAN segments
Internet Protocol Version 4 (TCP/IPv4)
Microsoft Network Adapter Multiplexor
What is the first action described before configuring the IP settings in the screenshot?
Click Configure on the adapter
Double-click Internet Protocol Version 4
Press Install to add new protocol
Open the Sharing tab for the adapter
When setting IP automatically, which network service on the router provides the address?
NAT translation service
DNS name resolution service
QoS traffic shaping service
DHCP lease assignment service
If Obtain an IP address automatically is selected, what manual information is no longer required?
Manual SSID and password
Manual IP, subnet, and gateway
Manual hardware driver updates
Manual MAC address entry
