ASE A7 Heating and AC Practice Exam

ASE A7 Heating and AC Practice Exam

Assessment

Flashcard

Other

10th Grade - University

Hard

Created by

Quizizz Content

FREE Resource

Student preview

quiz-placeholder

40 questions

Show all answers

1.

FLASHCARD QUESTION

Front

A CCOT system has a high high side pressure. Technician A says to suspect the thermostatic expansion valve. Technician B says this system contains an orifice tube. Who is correct?

Back

Technician B only

2.

FLASHCARD QUESTION

Front

Corrosion at point A of the electrical diagram above will result in: Excessive resistance in the splice leading to the high pressure sensor., Voltage drop at the connector of the signal circuit for the high pressure sensor., Excessive resistance in the reference circuit of the high pressure sensor., Voltage drop at the connector of the ground circuit for the high pressure sensor.

Back

Voltage drop at the connector of the signal circuit for the high pressure sensor.

3.

FLASHCARD QUESTION

Front

A vehicle's air conditioning performance is reduced at low speeds and stop lights, but cools at highway speeds. Which of these is MOST likely the cause of this condition? Options: A low refriderant charge., A missing fan shroud., A normal condition., A faulty compressore clutch relay.

Back

A missing fan shroud.

4.

FLASHCARD QUESTION

Front

Two technicians are discussing an inoperative electric blend door in an automatic air conditioning system. Technician A says to inspect the blend door's wiring and connections for an open circuit. Technician B says to troubleshoot this circuit with a test light. Who is correct?

Back

Technician A only

5.

FLASHCARD QUESTION

Front

A squeal is heard only when the compressor clutch first engages. Technician A says this is caused by a loose serpentine belt. Technician B says this is caused by a worn clutch pulley bearing. Who is correct?

Back

Technician A only

6.

FLASHCARD QUESTION

Front

Component A in the electrical diagram above has all of the following characteristics EXCEPT: It is a negative temperature Coeffiicient sensor., It is a thermistor., It is a variable resistor., It is a switch

Back

It is a switch

7.

FLASHCARD QUESTION

Front

A frozen spot is noticed in the center of the condenser. Technician A says a frozen spot on a component or connection indicates a restriction in the system. Technician B says this is caused by a clogged orifice tube. Who is correct?

Back

Technician A only

Create a free account and access millions of resources

Create resources
Host any resource
Get auto-graded reports
or continue with
Microsoft
Apple
Others
By signing up, you agree to our Terms of Service & Privacy Policy
Already have an account?