AUT-103 CH33 Wk4&6

Front

In the final drive assembly, the pinion gear drives the:

Back

ring gear

Front

When overhauling a manual transmission, it is important to inspect for damage if you are reusing the synchronizer assembly.

Back

True

Front

Before disassembling a manual transmission, remove any ________ that may be attached to the transmission case.

Back

Electronic sensors and Wiring

Front

_____ ensures that enough pressure is placed on the bearing to keep the shaft from moving around, but not so much that the bearing will run hot and begin to fail.

Back

Preload

Front

Who is correct regarding the condition of blocking rings: Technician A says that the condition of blocking rings should be checked by measuring the clearance between the blocking ring and the face of the gear. Technician B says that the blocking ring should be visually inspected for worn teeth and worn (smooth) internal surfaces?

Back

Both A and B

Front

Upon inspection of a failed manual transmission, it may be possible to find out what caused the failure of the transmission in the first place; for example, if the transmission shift linkage is keeping one gear _________, the dog teeth of the transmission can be damaged.

Back

Partially engaged

Front

All manual transmission seal surface openings should be checked for _______ with a dial caliper or bore gauge.

Back

Concentricity

Front

Who is correct regarding the removal of the final drive from a transaxle case: Technician A says that before removing it, it may be necessary to remove the output shaft. Technician B says it may be necessary to measure the preload and shim packs.

Back

Technician A

Front

If found cheaper to replace a transmission after disassembly and inspection, what should be done with the old unit?

Back

Reassemble it for core return.

Front

The oil slinger inside a manual transmission should be inspected for any defects or damage, such as _______ that may have occurred during the transmission failure that is being addressed.

Back

Scratches and bending of the slinger.