Search Header Logo
health and safety UK

health and safety UK

Assessment

Presentation

Construction

Professional Development

Practice Problem

Medium

DOK Level 4: Extended Thinking, DOK Level 3: Strategic Thinking

Standards-aligned

Created by

Lawrence Davies

Used 3+ times

FREE Resource

90 Slides • 49 Questions

1

media

2

Multiple Choice

Which of the following actions should be taken if a piece of equipment is identified as a potential hazard?

1

Continue using the equipment but with more caution

2

Report the hazard and discontinue use until the hazard is addressed

3

Try to fix the equipment yourself

4

Ignore the hazard if the equipment is essential

3

media

4

media

5

Multiple Select

What are the duties of employers to their employees under the Health and Safety at Work Act?

1

Provide and maintain safe plant and systems.

2

Provide information, instruction, training and supervision.

3

Provide and maintain safe access and egress.

4

Provide and maintain a safe working environment.

6

Multiple Choice

What is the main focus of the Health and Safety at Work Act?

1

Protecting personal data

2

Ensuring the safety of employees at work

3

Providing care for the elderly

4

Regulating mental health treatment

7

Multiple Choice

The Health and Safety at Work Act requires employers to:

1

Provide free meals to employees

2

Conduct regular risk assessments

3

Offer mental health counselling

4

Ensure data protection

8

media

9

Multiple Choice

What is the importance of conducting a risk assessment before using a new power tool?

1

To ensure the tool is aesthetically pleasing

2

To identify and mitigate potential hazards

3

To impress your supervisor

4

To determine the tool's resale value

10

media

11

Multiple Choice

What are the three responsibilities of the Health and Safety Executive (HSE)?

1

Enforcement, Legislation and advice, Inspection

2

Training, Monitoring, Reporting

3

Advising, Consulting, Inspecting

4

Enforcement, Training, Compliance

12

Multiple Choice

What are the responsibilities of employees under the Health and Safety at Work Act?

1

Take reasonable care for health and safety

2

Ignore safety regulations

3

Report all incidents to management

4

Avoid cooperation with employers

13

media

14

Multiple Choice

What are the three types of notices that inspectors can issue if they find a problem?

1

Improvement Notice, Prohibition Notice, Deferred Prohibition Notice

2

Warning Notice, Safety Notice, Compliance Notice

3

Inspection Notice, Violation Notice, Safety Notice

4

Immediate Notice, Temporary Notice, Permanent Notice

15

media

16

Multiple Choice

which of the following is NOT acceptable welding attire

1

Jeans

2

Steel toe shoes

3

fleece pull over

4

leather gloves

17

Multiple Choice

People whose job is to respond to emergency calls and help someone that is injured. They may drive the injured person in an ambulance to the hospital.

1

Police

2

911 Operator

3

Paramedic

4

SWAT Team Member

18

Multiple Choice

What should you do if you notice a power tool is malfunctioning during use?

1

Continue using it until the job is done

2

Turn it off and report the issue immediately

3

Try to fix it yourself

4

Ignore it if the malfunction is minor

19

Multiple Choice

What does PPE stand for?

1

Personal Protective Equipment

2

People

Proactive Equipment

3

Personal Proximity Equipment

4

Positive

Pressure Equipment

20

Multiple Select

What are common sources of crystalline silica in construction and building materials?

1

Brick/mortar and concrete

2

Slate and granite

3

Sandstone and stone aggregate

4

Tile and sand

21

Multiple Choice

What information is required to fill in the accident book?

1

Name and address of the person injured

2

Date and time of the accident

3

Description of the treatment given to the casualty

4

All of the above

22

Multiple Select

Your co-worker just got electrocuted; what should you do? choose all that apply

1

report to a chain of command

2

wear personal protective Equipment (PPE)

3

Turn power off

4

check for breathing

23

Multiple Choice

Any material that contains more than 1% asbestos, that when dry cannot be crumbled, pulverized or reduced to powder by hand pressure is _____________.

1

Friable

2

Non-friable

24

Multiple Choice

Which of the following incidents are reportable under RIDDOR?

1

Injury to a member of the public requiring hospital treatment

2

Minor injuries that do not require treatment

3

Injuries resulting in less than 7 days off work

4

All accidents that occur at work

25

media

26

Multiple Choice

What should be done if a container is found without a label under the COSHH regulations?

1

Report it as a hazard

2

Ignore it

3

Use it cautiously

4

Label it yourself

27

media

28

Fill in the Blank

Fill in the blank: All materials/substances used in the workplace should have a ___ Assessment carried out on them before they are used.

29

Multiple Choice

What information is typically included in a Safety Data Sheet?

1

Chemical composition

2

Emergency contact information

3

Handling and storage instructions

4

All of the above

30

Multiple Choice

What is the purpose of a COSHH Assessment in the workplace?

1

To assess the quality of materials

2

To evaluate health risks associated with substances

3

To determine the cost of materials

4

To ensure compliance with safety regulations

31

media

32

Multiple Select

Hazard Communication Standard Labels must include what information?

1

Product identifier

2

Precautionary Statement

3

Location on the jobsite

4

Hazard pictogram

5

Signal Word

33

media

34

Multiple Choice

According to PUWER, what must tools and equipment be?

1

Suitable for the intended use

2

Only used by trained personnel

3

Accompanied by health and safety measures

4

All of the above

35

media

36

Multiple Select

What are the full titles of the following abbreviations: COSHH, HASAWA, PUWER, HSE, RIDOR?

1

Control of Substances Hazardous to Health

2

Health and Safety at Work Act

3

Provision and Use of Work Equipment Regulations

4

Health and Safety Executive

5

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations

37

Open Ended

Name 3 reportable types of incident, which are reportable under RIDDOR.

38

media

39

Multiple Select

Which of the following situations should you evacuate the area immediately? (Select all that apply.)

1

A.  The fire could block your only exit

2

B.  The fire is spreading very quickly

3

C.  The type of the extinguisher is wrong

4

D.  It is necessary to crawl on the floor due to excessive smoke

5

E.  The fire is too large

40

media

41

Multiple Choice

Under RIDDOR (1995), who is responsible for reporting serious workplace accidents?

1

Employers

2

Self-employed individuals

3

Individuals in control of work

4

All of the above

42

media

43

Multiple Choice

According to the RIDDOR regulations, what additional documentation is required besides the RIDDOR form?

1

A first aid report

2

An accident book

3

A witness statement

4

A medical report

44

Multiple Choice

What is the purpose of the RIDDOR form and when should it be filled out?

1

To report any injury or dangerous occurrence

2

To maintain an accident book

3

To provide first aid

4

To notify the police

45

media

46

Fill in the Blank

Fill in the blank: RIDDOR defines a major injury as a __________ (but not to a finger, toe, or thumb).

47

Multiple Select

According to RIDDOR, which of the following is NOT considered a major injury?

1

A dislocation

2

A fracture

3

A small cut

4

An amputation

5

a broken finger

48

media

49

Open Ended

List the types of dangerous occurrences that need to be reported.

50

Multiple Choice

What are some examples of diseases and health problems that must be reported under RIDDOR?

1

Poisoning

2

Skin diseases

3

Lung disease

4

All of the above

51

media

52

Open Ended

According to the statistics, how many reported major injuries were there in the construction sector?

53

Multiple Choice

What percentage of fatalities in construction is attributed to being struck by a falling/moving object?

1

3%

2

16%

3

10%

4

5%

54

Multiple Choice

What is the proportion of fatalities in construction due to falls compared to all other industries?

1

59%

2

25%

3

10%

4

5%

55

media

56

Multiple Choice

What are the minimum contents that should be included in a first aid kit for low level hazards?

1

A copy of the HSE leaflet on first aid

2

20 sterile plasters

3

2 sterile eye patches

4

1 pair of disposable gloves

57

media

58

Open Ended

In your opinion, given the risks that scaffolders, stagers and riggers are exposed to, why has there been so few deaths?

59

Open Ended

In your opinion, why were there so few deaths amongst painters and decorators?

60

Multiple Select

What are common sources of crystalline silica in construction and building materials?

1

Brick/mortar and concrete

2

Slate and granite

3

Sandstone and stone aggregate

4

Tile and sand

61

media

62

Open Ended

Name 3 people who could be involved in dealing with an accident or emergency situation on site:

63

Open Ended

True or False: Ibuprofen should be included in all first Aid boxes:

64

Open Ended

Name 3 major injuries reportable under RIDDOR?

65

Open Ended

Using the information in the table above, if you were given a budget to produce health and safety information, advertise dangers of, and create training courses. Which cause of fatalities in the construction industry would you target?

66

Open Ended

Why is it important to report all accidents and near misses?

67

media

68

Multiple Choice

What is the purpose of carrying out risk assessments on a construction site?

1

To identify hazards

2

To increase productivity

3

To reduce costs

4

To improve aesthetics

69

media

70

Open Ended

What is the difference between a hazard and a risk?

71

Multiple Choice

What are the six steps to writing a risk assessment?

1

List the work tasks

2

Identify the risks

3

Evaluate the risk

4

Review your findings

72

media

73

Multiple Select

What are the five basic categories of hazards listed in the risk assessment?

1

Physical

2

Ergonomic

3

Biological

4

Chemical

5

Psychosocial

74

media

75

media

76

media

77

media

78

media

79

media

80

media

81

media

82

media

83

media

84

media

85

media

86

media

87

media

88

media

89

media

90

media

91

media

92

media

93

media

94

media

95

media

96

media

97

media

98

media

99

media

100

media

101

media

102

media

103

media

104

media

105

media

106

media

107

media

108

media

109

media

110

media

111

media

112

media

113

media

114

media

115

media

116

media

117

media

118

media

119

media

120

media

121

media

122

media

123

media

124

media

125

media

126

media

127

media

128

media

129

media

130

media

131

media

132

media

133

media

134

media

135

media

136

media

137

media

138

media

139

media
media

Show answer

Auto Play

Slide 1 / 139

SLIDE