Woodshop Power Tool Safety

The Belt Disk Sander can be used to sand what type wood?

• Painted

• Glued

• Clean wood only

• None of the above

Before starting the drill press, what should be removed from the machine?

• Drill bit

• Chuck key

• Material

• None of the above

The Lathe machine is used to …

• Turn wood pieces into cylinder shaped projects

• Shape wood into bowls, candlesticks, and pens

• Spins wood and uses tools to shape wood into cylinder shapes

• All the above

When using the Lathe machine, it is critical to have …

• Eye protection & face mask or Face Shield

• No jewelry

• Long hair tied up

• All the above

The cutting tools need to be held …

• On an angle and cutting into the material

• Perpendicular to the wood and barely touching the piece

• Neither of the above

• Both of the above

The Drill needs to be held _____________________ so that the drill bit does not break.

• At a 45 degree angle

• Perpendicular to the project

• At a 90 degree angle

• None of the above

You should always place an ________________ underneath your project when using the drill press to ensure a clean drilled hole on the bottom side of the project.

• Metal Plate

• Acrylic Slab

• Extra Board

• None of the above

When sanding on the belt disk sander, the material needs to be …

• held in one place

• moved in a downward motion against the rotation across the abrasive material

• moved in an upward motion going with the rotation across the abrasive material

• none of the above

Routers must be …

• Unplugged when changing the bits

• Material clamped down

• All of the above

When sanding on the Belt Disk Sander, small parts should be …

• sanded carefully

• not sanded

• Neither of the above