MSSC M3-3 - Machining Process

The three major steps of manufacturing are __________.

• cutting, drilling, milling

• obtain natural resources, produce industrial materials, make finished products

• primary, secondary, finishing

• mechanical, electrical, chemical

Feed of a single point cutting tool most affects the __________.

• cutting speed

• tool's life

• depth of cut

• geometry of the tip

Which of the following operations is not used as a machining operation?

• Sawing

• Drilling

• Turning

• Slicing

A machine that uses a computer to control its cutter or table is a __________.

• CLT

• CNC

• NCC

• CCN

In a CNC machine operation, zero offset __________.

• means that the operator cannot move the part on the work table by any amount

• allows the operator to move the part to the most desirable location on the work table

• requires specialized tooling

• is an advanced programming function

On a CNC milling machine a movement along the X direction would move the __________.

• cutting tool

• spindle

• table

• collet

During the cutting action, the tool tip __________ the metal until the metal's fracture point is exceeded.

• shears

• melts

• deforms

• slices

A __________ chip is a chip that is broken by the use of a chip breaker on the cutting tool.

• broken continuous

• broken

• continuous

• flowing

A built-up edge condition of a cutting tool causes it to __________.

• cut more shallow

• cut more deeply

• increase the feed rate

• reduce friction between the cutting tool and the work piece

A file card is used to __________.

• identify location of files

• repair a file

• record critical production information

• clean metal particles from the file