Procedure Text on Manual and Tips Form

The purpose of procedure text is ...

• explain something done or postponed

• to describe how something is completely done through a sequence of series

• to persuade the reader should or should not do something

• to amuse the reader about a story

The correct arrangement of generic structures in procedure text (manual and tips) are ...

• tips, materials, tips

• steps, tips, goal

• goal, steps, tips

• steps, goal, tips

The examples of adverbial of sequence / temporal conjunction are ...

• because, when, while

• first, second, third

• and, but, so

• moreover, then, eventhough

First, start by getting the floor as dry as possible.

The underline word is called .....

• Adverb of place

• Imperative sentence

• Adverb of sequence

• Action verb

The suggestion is using a tool in procedure text (manual and tips) is called .....

• steps

• goal

• advice

• tips

How to operate the lathe machine. It is called...

• Goal

• Tips

• Steps

• Tips and steps

How to Use a Lathe

1. Ensure the machine is fully powered down.

2. Don't leave any risk of the machine turning on by accident.

3. Securely load the part. In a CNC lathe, the stock is held in a “chuck” by tightening screws at each end.

4. Select and load your tooling. ...

5. Correctly calibrate the tools and the part. ...

6. Enter and execute the program. What is the synonym of the underlined word?

• Choose

• Chosen

• Cut

• Cover

How to Use a Lathe

1. Ensure the machine is fully powered down.

2. Don't leave any risk of the machine turning on by accident.

3. Securely load the part. In a CNC lathe, the stock is held in a “chuck” by tightening screws at each end.

4. Select and load your tooling. ...

5. Correctly calibrate the tools and the part. ...

6. Enter and execute the program.

What is the sosial function of the text?

• To inform the readers how to use a lathe

• To tell the readers about the experience using lathe

• To amuse the readers

• To attract the readers

How to Use a Lathe

1. Ensure the machine is fully powered down.

2. Don't leave any risk of the machine turning on by accident.

3. Securely load the part. In a CNC lathe, the stock is held in a “chuck” by tightening screws at each end.

4. Select and load your tooling. ...

5. Correctly calibrate the tools and the part. ...

6. Enter and execute the program.

Which a part is called goal

• How to use a lathe

• Enter and execute the program

• Select and load your tooling

• Don't leave any risk of the machine turning on by accident

How to Use a Lathe

1. Ensure the machine is fully powered down.

2. Don't leave any risk of the machine turning on by accident.

3. Securely load the part. In a CNC lathe, the stock is held in a “chuck” by tightening screws at each end.

4. Select and load your tooling. ...

5. Correctly calibrate the tools and the part. ...

6. Enter and execute the program.

based on the text above, what is the tips ?

• Ensure the machine is fully powered down.

• Don't leave any risk of the machine turning on by accident

• Select and load your tooling

• Enter and execute the program.