Automotive maintenance module review

What prevents metal to metal contact of engine components?

• Rubber bushings

• Roller bearings

• A thin film of oil

• A thin film of water

The MT-82 manual transmission in a 2013 Mustang GT uses which fluid?

• ATF

• 80/90 gear oil

• 10w30 engine oil

• it is best to look this up in our electronic service information

A higher viscosity rating on an oil bottle indicates that the oil is:

• Less able to flow

• More able to flow

• Able to last more miles

• Better able to deal with debris and contamination

A customer's heater isn't able to defrost the windshield effectively. You check it, and there is very little air movement, even with the fan on high. What is your next inspection step?

• Blower motor voltage check

• Check the air direction motors and control panel

• Use the scan tool to check for codes

• Check the cabin air filter

When changing engine oil, you should also always change the:

• oil filter

• air filter

• transmission fluid

• cabin filter

Prior to replacing a fuel filter, you should always:

• Drain the gas tank

• Release the pressure from the fuel system

• Change it with the engine running

• Feel it to see if it's hot before you take it off

Before opening a cooling system cap:

• Put on your safety glasses

• Let the engine cool for a few minutes

• Check the oil

• Check the headlights

A 2008 Chevrolet Impala uses which power steering fluid?

• GM 8112 spec power steering fluid

• DEXRON VIII

• DEX COOL

• It would be best to look this up in the electronic service information

Most shops will want you to complete _____________ along with every maintenance service

• an inspection form

• a Micheal Jackson moonwalk dance routine

• a transmission flush

• A complete interior shampoo and detailing

When performing a maintenance service on a vehicle, you should inspect:

• The belt

• The air filter

• The suspension for loose components

• All of the above