Maintenance N1

How to inspect spark plugs?

(Multiple Answers)

• Check the base of the spark plugs if they are worn out.

• Check the distance between the electrodes is exactly as what is required by the service manual.

• Check if the electrodes are rusted or worn out.

• Check the connectors to the spark plugs if they are burned.

How to inspect the brakes during a Periodic Maintenance?

(Multiple Answers)

• Check if brake pads are worn out and if disc brake is rusted or deformed.

• Check if brake booster vacuum hose is cracked and must be replaced.

• Check if brake fluid is leaking .

• Replace the brake fluid no matter when was it replaced the last time.

How to perform the inspection of an accessory drive belt?

(Multiple Answers)

• Check if the drive belt is worn out.

• Check if the drive belt is cracked or peeled.

• Check if the alternator is rotating normally.

• If drive belts are required to be replaced, replace the auto-tensionner at the same time.

Where is a cabin filter located?

• Next to the AC compressor.

• Under the back seats.

• Under the glove box.

• Inside the driver door.

What does an oil filter retain?

• Water

• Metallic particles

• Dust

Which step is NOT to be done during cooling system inspection?

• Check the level of the coolant in the reservoir.

• Check no evidence of leakage in the engine compartment.

• Check no obstruction of the fan and the radiator.

• Check if the A/C is cooling efficiently

Which systems can, in most cases, they use the same fluid?

• Clutch and power steering.

• Clutch and brakes.

• Automatic transmission and brakes.

• Power steering and brakes.

Which item should be checked while inspecting a brake booster?

• Master cylinder

• Brake flexible joints

• Vacuum hose

• Brake pads

What are the 2 actions to perform as wheel inspection during Periodic Maintenance?

(Multiple Answers)

• Shake the wheel to check for excessive clearance.

• Check if the damper is leaking.

• Check if the steering gear boots are cracked.

• Check wheel bearings for smooth operation.

What is the role of EVAP system?

• It prevents gasoline vapors from escaping into the atmosphere from the fuel tank and feed it to the intake manifold of the engine.

• It prevents diesel vapors from escaping into the atmosphere from the fuel tank and feed it to the intake manifold of the engine.

• It pressurizes the fuel reservoirs in order to increase the efficiency of the feed pump.