welding

another name for a machinist's hamer is _______

• ball-peen hammer

• claw hammer

• veneer hammer

• sledgehammer

a heavy-duty tool used to drive posts or other large stakes is a

• mallet

• sledgehammer

• bell-faced hammer

• ball-peen hammer

the proper angle for the edge of a cold chisel is

• 90 degrees

• 60 degrees

• 45 degrees

• 30 degrees

the type of screw shown in the figure above is a(n)

• philips head

• torx

• allen

• robertson

which of the following screws come to a relatively sharp point at the base of its drive socket?

• reed and prince

• torx

• allen

• slotted

how many sides does a hexagonal shape have?

• four

• five

• six

• seven

to quickly run a nut onto a bolt that resists spinning it on with the fingers, you can drive the socket with a(n)

• striking wrench

• open-end wrench

• speed handle

• breaker bar

another common name for linemen pliers is _______

• locking pliers

• tongue-and-groove pliers

• needle-nose pliers

• side cutters

because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____

• vertical distance

• horizontal distance

• inside dimensions

• circular diameters

one situation that can make a measurement with a laser inaccurate is measuring to a _____

• metal surface

• plastic surface

• highly reflective surface

• very dull, matte surface