IPVPN ASSESSMENT

Will these two sites see/connect w/ each other?

• YES

• NO

• MAYBE

Assume you are using a Huawei Router, what is the unit of cir 1200 on the configuration below?

• Bps

• Kbps

• Mbps

• Gbps

On the image below, what is the sub-interface number?

• 1166

• 64

• 1155

• None of the mentioned

If you would create static route for LAN IP 192.168.1.0/29 in Huawei Router, what is the command?

• ip route-static vpn-instance HIPR1234_MCJOLLY 192.168.1.0 255.255.255.252 10.230.102.122

• ip route-static vpn-instance HIPR2345_MCJOLLY 192.168.1.0 255.255.255.248 10.230.102.122

• ip route-static vpn-instance HIPR1234_MCJOLLY 192.168.1.0 255.255.255.248 10.230.102.121

• ip route-static vpn-instance HIPR1234_MCJOLLY 192.168.1.0 255.255.255.248 10.230.102.122

In IPVPN Services, can you combine both Static and BGP Protocol?

• TRUE

• FALSE

What is the Administrative Distance (AD)/Route Preference of Static Route?

• 1 (Cisco) / 60 (Huawei)

• 110 (Cisco) / 10 (Huawei)

• 1 (Cisco) / 1 (Huawei)

• 120 (Cisco) / 100 (Huawei)

What is an example of “Access” node?

• Demarc

• OLT

• CEN

• All of the above

If you are using a Huawei Demarc for IPVPN Service of client. What is the correct handover port configuration

• Access

• Trunk

• QinQ

• Access or QinQ

You want to advertise the default route of HO to remote sites, what is the command?

• Ip route-static vpn-instance HIPR2345_MCJOLLY 0.0.0.0 0.0.0.0 10.230.102.122

  Bgp 1122

   Default-route originate

• Ip route-static vpn-instance HIPR2345_MCJOLLY 0.0.0.0 0.0.0.0 10.230.102.122

• Bgp 1122

   Default-route originate

• None of the above

A client is complaining that one of its remote site cannot connect to HO, their IPVPN currently has 3000 learned prefixes. What is the possible problem?

• Remote site has no route going to HO IP

• HO has no route going to remote site

• Remote site VRF prefix limit should be increased to 5000

• Layer 8 problem

• All of the above except D