TES FORMATIF

Choose the best answer A, B, C or D

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the speaker on. Wait until you hear the acoustic response “Bluetooth mode has been on” from the device. During pairing, the status LED will blink fast. Step 2: Open the settings menu of your device and look for the Bluetooth option.

This must be activated. In the list of found devices you will now find "Bamboo BT008". Connect. If a code is to be entered, please enter "0000". If your phone is NFC-enabled and NFC as well as Bluetooth are activated, you can connect simply by holding your phone close to the connector side of the loudspeaker. If the connection is established successfully, the device will respond acoustically

(“Paired”).

Step 3: Now the speaker is ready for use. Pairing will be saved and available when switching on the device the next time.

1. 1. What is the text about?

• A.      Connect a bluetooth to your cellphone

• B.      Pairing the NFC-enabled cellphone

• C.      Connect a wireless speaker to a smart TV

• D.      Pairing a bluetooth speaker

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the speaker on. Wait until you hear the acoustic response “Bluetooth mode has been on” from the device. During pairing, the status LED will blink fast. Step 2: Open the settings menu of your device and look for the Bluetooth option.

This must be activated. In the list of found devices you will now find "Bamboo BT008". Connect. If a code is to be entered, please enter "0000". If your phone is NFC-enabled and NFC as well as Bluetooth are activated, you can connect simply by holding your phone close to the connector side of the loudspeaker. If the connection is established successfully, the device will respond acoustically

(“Paired”).

Step 3: Now the speaker is ready for use. Pairing will be saved and available when

switching on the device the next time.

2. 2. If you have an NFC-enabled cellphone, what should you do to pair the speaker?

• A.      Entering the code to the cellphone

• B.      Activating the blue tooth option

• C.      hold your phone close to the connector side of the loudspeaker

• D.      open the menu setting

ESTABLISHING THE BLUETOOTH CONNECTION

Step 1: Switch the speaker on. Wait until you hear the acoustic response “Bluetooth mode has been on” from the device. During pairing, the status LED will blink fast. Step 2: Open the settings menu of your device and look for the Bluetooth option.

This must be activated. In the list of found devices you will now find "Bamboo BT008". Connect. If a code is to be entered, please enter "0000". If your phone is NFC-enabled and NFC as well as Bluetooth are activated, you can connect simply by holding your phone close to the connector side of the loudspeaker. If the connection is established successfully, the device will respond acoustically

(“Paired”).

Step 3: Now the speaker is ready for use. Pairing will be saved and available when switching on the device the next time.

3. 3. After switching on the speaker, what is the next step?

• A.      Enter the blue tooth code

• B.      Open the setting menu and activate the Bluetooth option

• C.      Hold the phone close to the speaker

• D.      Enable the NFC menu

Questions 4 to 5 based on the text

 

How to clean your PC

1.      Turn off the PC and unplug all the power cables.

2.      Using a can of compressed air, work your way from the top to the bottom

3.        Clear away any dust you found

4.      Pay special attention to the CPU cooler, fans, and dust filter.

5.      If some dust still remains, clean it with a lint-free cloth.

6.      When you’re done cleaning, close the case to prevent dust from getting it again.

4.  What is the text about?

• A.      Steps of moving PC

• B.      How to clean PC

• C.      How to unplug cables

• D.      How to install cooler

Questions 4 to 5 based on the text

 

How to clean your PC

1.      Turn off the PC and unplug all the power cables.

2.      Using a can of compressed air, work your way from the top to the bottom

3.        Clear away any dust you found

4.      Pay special attention to the CPU cooler, fans, and dust filter.

5.      If some dust still remains, clean it with a lint-free cloth.

6.      When you’re done cleaning, close the case to prevent dust from getting it again.

5. What is the similar meaning of the word prevent in step 7?

• A.      allow

• B.      avoid

• C.      encourage

• D.      permit

Questions 6 to 8 based on the text How to Connect a Wireless Mouse

 

First, plug in your mouse’s receiver to your computer’s USB port. Then, the mouse driver will automatically be installed to detect the wireless mouse

Second, make sure that your mouse has batteries or is charged. To do this, flip the mouse over and remove the battery compartment cover.

Third, turn on your mouse. Usually the on/off switch is on the back of the mouse. Finally, your wireless mouse is ready to use.

https://www.websiteedukasi.eu.org/2020/12/materi-bahasa-inggris-kelas-12-procedure- text.html#close

 

 

6.      What is the text about?

• A.       How to receive the USB’s Port

• B.       How to detect the mouse driver

• C.       How to connect a wireless mouse

• D.       How to detach the mouse

Questions 6 to 8 based on the text

How to Connect a Wireless Mouse

 

First, plug in your mouse’s receiver to your computer’s USB port. Then, the mouse driver will automatically be installed to detect the wireless mouse

Second, make sure that your mouse has batteries or is charged. To do this, flip the mouse over and remove the battery compartment cover.

Third, turn on your mouse. Usually the on/off switch is on the back of the mouse. Finally, your wireless mouse is ready to use.

https://www.websiteedukasi.eu.org/2020/12/materi-bahasa-inggris-kelas-12-procedure- text.html#close

7.      What is the similar meaning of flip ( line 3) ?

• A.       Roll over

• B.       Turn over

• C.       Back side

• D.     Front side

Questions 6 to 8 based on the text

How to Connect a Wireless Mouse

 

First, plug in your mouse’s receiver to your computer’s USB port. Then, the mouse driver will automatically be installed to detect the wireless mouse

Second, make sure that your mouse has batteries or is charged. To do this, flip the mouse over and remove the battery compartment cover.

Third, turn on your mouse. Usually the on/off switch is on the back of the mouse. Finally, your wireless mouse is ready to use.

https://www.websiteedukasi.eu.org/2020/12/materi-bahasa-inggris-kelas-12-procedure- text.html#close

8.      What needs to be checked before turning on the mouse?

• A.       The battery

• B.       The electrical socket

• C.       The USB Ports

• D.       The cables

How to Operate Computer

 

First, switch on the Stavolt. Stavolt is an electrical tool to stabilize the electricity to the computer hardware

Second, press the power button to turn on the CPU. The power button usually lays under the CD Rom. The shape is round or square.

Third, turn on the monitor. Sometimes the monitor is on when the CPU is turned on. It depends on     the     previous     user     whether      turned      the      monitor      on      or      off. Fourth, start to operate an application. Example, if you want to type, you can open Microsoft Word application by clicking twice.

9.      What should you do if you want to use an application?

• A.       Press the power button

• B.       Turn on the monitor

• C.       Stabilize the electricity

• D.       Clicking twice

How to Operate Computer

 

First, switch on the stavolt. Stavolt is an electrical tool to stabilize the electricity to the computer hardware

Second, press the power button to turn on the CPU. The power button usually lays under the CD Rom. The shape is round or square.

Third, turn on the monitor. Sometimes the monitor is on when the CPU is turned on. It depends on     the     previous     user     whether      turned      the      monitor      on      or      off. Fourth, start to operate an application. Example, if you want to type, you can open Microsoft Word aplication by clicking twice.

 

10.      The synonym of the word stabilize in the first step is ….

• A.      let down

• B.      maintain

• C.      unlock

• D.      release