NCCER 26110

Extension lines that point from a note to a feature on a drawing are called _______.

• break lines

• followers

• match lines

• leaders

Changes to the drawings will be noted in the _____.

• approval block

• legend

• revision block

• title block

A high-quality specification will _______.

• tell the tools to be used on site

• include a symbols and definitions table

• clarify the work to be done by each trade

• specify the gate each trade uses to enter the site

A cutaway view of a building or object is known as a(n) _____.

• detail drawing

• section drawing

• architectural drawing

• branch circuit drawing

The Americans with Disabilities Act requires that accessible receptacles be mounted at a minimum height of _____.

• 6 inches

• 12 inches

• 18 inches

• 24 inches

Why is there a letter R next to the outlet boxes for the Type C luminaires in the figure provided?

• They are exit lights.

• They all have receptacle outlets next to the fixtures.

• The lights have been revised from the original plan.

• The fixtures are recessed.

The letters inside the triangles in the figure provided represent the _____.

• receptacle types

• fixture types

• placement of smoke detectors

• amount of revisions on the drawing

A metric drawing scale of 1:100 typically depicts units in _____.

• millimeters

• centimeters

• decimeters

• meters

The location of overhead fluorescent fixtures would MOST likely be found on the _____.

• panel schedule

• floor plan

• reflected ceiling plan

• lighting schedule

According to the figure provided, where can information on Panel A be located?

• The panelboard schedule

• The equipment schedule

• The electrical schedule

• The branch circuit schedule