Gr-20 Safety

Safety Compliance: What is the first action an operator must take before operating the GR models?

• Check the weather conditions.

• Perform a pre-operation inspection.

• Call for a supervisor inspection.

• Charge the batteries fully.

Hazard Identification: Which symbol indicates a potential personal injury hazard?

• A triangle with an exclamation mark.

• A circle with a cross.

• A square with a diagonal line.

• A triangle with a lightning bolt.

Emergency Procedures: What should you do immediately if the machine comes energized with power lines?

• Continue operating to move away from the lines.

• Use the machine as a grounding device.

• Keep away and do not touch or operate the machine.

• Try to disconnect the power source.

Operational Guidelines: What is the maximum allowable side force for the GR models according to ANSI/CSA standards?

• 50 lbs / 22.7 kg

• 100 lbs / 45.4 kg

• 150 lbs / 68 kg

• 200 lbs / 90.7 kg

Platform Capacity: What is the maximum capacity for the GR-20's standard platform?

• 500 lbs / 227 kg

• 350 lbs / 159 kg

• 250 lbs / 113 kg

• 450 lbs / 204 kg

Battery Maintenance: For standard batteries, what should be checked before operating the machine?

• Hydraulic oil level.

• Battery fluid level and cable connections.

• Tire pressure.

• Platform extension mechanism.

Driving on Slopes: What is the maximum slope rating for the GR models in the stowed position?

• 10%

• 20%

• 30%

• 40%

Emergency Stop Button: How is the emergency stop button used to stop all functions?

• Turn clockwise.

• Push in.

• Pull out.

• Slide up.

Machine Inspection: Before each work shift, what is essential for the operator to perform?

• Battery recharging.

• Pre-operation inspection.

• Calling the supervisor for instructions.

• Lubrication of moving parts.

Platform Controls: If the platform controls LED diagnostic readout displays "LL," what should the operator do?

• Ignore, it's a standard operational code.

• Return the lift to level.

• Reset the system by pushing in and pulling out the red Emergency Stop button.

• Immediately contact technical support for software issues.