Segment 1 2024 #3

While performing your pre-driving check, you can accurately determine your tire pressure by:

• using a tire pressure gauge

• using a quarter

• visually checking them

If you experience sudden brake failure while driving, you should:

• hold the brake pedal half way down

• rapidly pump the brake

• hold the brake pedal all the way down

A safe and prudent speed for driving in clear, dry conditions is:

• the posted speed limit.

• over the speed limit.

• under the speed limit.

In a multiple lane roundabout, you should:

• change lanes at any point in the roundabout

• change lanes before entering

• change before exiting

You are driving in two-way traffic. An oncoming driver drifts into your lane and is headed straight for you. What is a good rule to remember?

• Brake hard and stop in your lane

• Brake and steer left

• Brake and steer right

Ample space to the front, rear, and sides of your vehicle can help to improve the drivers:

• steering control

• traction

• visibility

When preparing to move your vehicle:

• shift into gear and turn your turn signal off.

• check tire pressure and release the parking brake.

• shift into gear and release the parking brake.

Increasing the speed of your vehicle means you need to:

• decrease your braking distance

• decrease your following distance

• increase your following distance

A common error in vehicles with push button start is that a driver may forget to:

• set the parking brake

• lock their vehicle

• turn the vehicle off

When you observe a hazard well ahead, you should:

• move to the left

• move to the right

• check your mirrors