Which of the following is the best practice in handling the sewing machine?

Use both hands when picking up the materials

See to it that all screws are will secured

The following are the characteristics of good stitches except.

Lightly curve in both upper and lower stitches

The 5S method process improvement was created to help

Manufacturing companies learn to work station order and maximize efficiency

Service companies determine the most qualified candidates for hire

Jerome is sewing the threaded machine exercises and he notice that the lower stitches are loose. His teacher told him to set-up the upper thread properly. How will he correct the upper threading of his sewing machine?

Adjust and balance the tension of the upper thread

Change the needle appropriate for the thread

How does the lower threading done in setting the sewing machine?

Placed the lower spool of the thread in the shuttle facing the latch in horizontal position and making sure is set and lock properly to avoid it to fall that may cause tangle stitches

Clear up the shuttle from the tangle of threads before installing the lower threading

Vincent is sewing the school pants. Along with the operation he is keep on replacing the lower thread and suddenly the lower stitches become puckered because of incorrect winding of the thread. How will he rewind the thread properly to the bobbin ?

Thread must pass in eyelet, tension and rolled properly in the bobbin to hold the thread in place while winding

Thread must pass in the upper tension of the machine and in the lower tension

In setting up the sewing machine must be taken into account to produce good stitches for operating an item. In the process of stitching Tommy found out that the lower stitches are too tight and even breaking. Why there is a need to balance the lower tension of the threading?

In order to neutral the lower tension

In order to neutral the upper tension

As a sewer, when are you going to reinforce the stitches in every sewing operation?

In sewing the start, middle and end part of the operation

In sewing the start and middle part of the operation

Standard tension for lower thread mm just be observed prior to sewing. Unbalanced tension will cause problem to the stitches. What will you do if the lower thread breaks?

I will readjust the tension of the lower thread

I will check the lower tension if it is in good condition

Proper procedure in setting up the sewing machine is recommendable to all sewers. In same case rewinding, the thread of the lower spool must be done well. Why do you lift the presser foot while doing the process?

To regulate the thread in winding

You are assembling the school polo as your performance task. Since speed is one of the criteria, you set-up directly the machine and sew the item without realizing that you failed to follow the instruction of your teacher to use the same color of thread to the item and you finished sewing already and your lower stitches have different color. What will you do to the item and lower thread spool?

I will wind an appropriate color of the thread and sew the item with appropriate color to the item

I will rip the stitches and wind the lower spool with appropriate color of the thread

Why do you think it is important to coordinate the hand and foot in operating the sewing machine?

To operate the machine smoothly

To maintain the proper posture in while sewing to avoid accident

As a tailor, it is your responsibility to check the sewing machine on it's good running condition before starting to sew. You found out that the machine has no belt. How will you attach properly the machine belt?

I will attach the machine belt from the hand wheel to the motor pulley

I will attach the machine belt from the machine motor to the treadle

You are about to operate the standard sewing machine, as beginner you need to undergo the treadle control activity. For you to master controlling the single movement of the needle, you must perform the single dot attempts. How will perform the trial correctly?

Make a measured build up slow speed running as the single movement of the needle towards the materials

Burst the treadle to it's required speed until the squares are run through by one pierce of the needle

You have difficulties in sewing circular rag as your project. The circular row of stitches is not done smoothly and there are corner of stitches because you failed to practice controlling the treadle's activity prior the project. How do the treadle control's exercises help you in sewing curve lines?

It qualifies my ability to gain controlling the treadle

It helps me manipulating the machine in fastest speed required

Thomas is kept on ripping the stitches of his project because of skipping stitches. So, he stops and check the possible cause of the fault like the threading, position of the needle long groove and feed regulating dial. What do you think is the cause of the uneven length of the stitches?

The needle is not inserted properly

The screw that tighten the feed dog is loose

You are adjusting the treadle of you machine for your machine exercises immediately after adjusting your turn-on the machine and accidentally press the treadle, this may cause the machine to overheat and smoke. What is your immediate action to take?

Wait until the teacher inform to turn-off

How will you correct loose top stitches of the machine?

By turning the upper tension dial disc to the left to decrease the tension

By turning the stitch regulator to the left to decrease the tension

During your round rag operation, you observed that the lower stitches were too loose. How will adjust the tension of the lower thread?

I will turn the adjusting screw of the bobbin case in a counter clockwise direction and test the tightness

I will turn the adjusting screw of the bobbin case in a clockwise direction and test the tightness

TLE - TAILORING

Authored by Jhonel Cortezano

Others

Professional Development

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

50 questions

Show all answers

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

American inventor who invented the up-and-down motion of the needle mechanism.

Isaac Singer

Elias Howe

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

A French tailor, Barthelemy Thimonnier invented the first functional sewing machine that has one thread and hooked needle used in embroidery machine. What is the machine stitch of his invention?

Chain Stitch

Overcast

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

They think up the combinations of line, proportion, color , and texture for intended garments.

Designers

Stylists

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

A flexible tape used to take body measurement.

Tape measure

Ruler

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

A machine that is run by foot which may also be converted to electric power machine is known as .

Lockstitch machine

Over edging machine

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

A machine used in making fancy stitches on fabrics is ______.

Lockstitch sewing machine

Embroidery machine

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

It is a machine part that is used to start and stop the operation of the sewing machine.

Button switch

Hand wheel

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

53 questions

Showroom Hostess Quiz

Quiz

•

Professional Development

51 questions

Tiếng anh

Quiz

•

Professional Development

48 questions

pinggiran umum 1

Quiz

•

Professional Development

51 questions

Test1

Quiz

•

Professional Development

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

20 questions

Figurative Language Review

Quiz

•

6th Grade

Discover more resources for Others

10 questions

How to Email your Teacher

Quiz

•

Professional Development

6 questions

3RD GRADE DECLARATION OF INDEPENDENCE EXIT TICKET

Quiz

•

Professional Development

19 questions

Black History Month Trivia

Quiz

•

6th Grade - Professio...

22 questions

Multiplying Exponents with the Same Base

Quiz

•

9th Grade - Professio...

40 questions

Flags of the World

Quiz

•

KG - Professional Dev...

TLE - TAILORING

American inventor who invented the up-and-down motion of the needle mechanism.

A French tailor, Barthelemy Thimonnier invented the first functional sewing machine that has one thread and hooked needle used in embroidery machine. What is the machine stitch of his invention?

They think up the combinations of line, proportion, color , and texture for intended garments.

A flexible tape used to take body measurement.

A machine that is run by foot which may also be converted to electric power machine is known as .

A machine used in making fancy stitches on fabrics is ______.

It is a machine part that is used to start and stop the operation of the sewing machine.

In sewing operation, the materials are moving against the sewer. What makes the materials move when sewing?

The direction in which the hand wheel should be turned.

The part of a sewing machine that holds the fabric in place while sewing.

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Others