Unit 9 Bandsaw Safety Instructions

What should you check before using the bandsaw?

• The blade is connected and tensioned

• The table is clean

• The power is off

• The saw is unplugged

What should you do if the blade makes a clicking noise?

• Continue using the saw

• Turn off the saw immediately

• Tighten the blade

• Call for help

Where should you not stand when using the bandsaw?

• In front of the saw

• On the left side of the table

• On the right side of the table

• Behind the saw.

What should you do if the blade breaks?

• Keep cutting

• Get out of the way

• Call the instructor

• Turn off the saw.

When can you make adjustments on the saw?

• While it is running

• When it is moving slowly

• Only when it has come to a complete stop

• Anytime.

What should you do before making any cuts?

• Turn on the saw

• Wait for the saw to come to full speed

• Adjust the blade

• Clean the table

How should you cut small circles or sharp curves?

• With a wide blade

• With a narrow blade

• With a dull blade

• With a fast speed

How should you guide the material to keep your fingers safe?

• Keep fingers in line with the cut

• Keep fingers away from the front of the blade

• Use both hands

• Push with force.

What should you use to remove scraps from around the table?

• Your hands

• A piece of wood

• A brush

• A vacuum

What should you do if the material is too large or heavy?

• Use the bandsaw anyway

• Cut it in half first

• Use tools designed for large materials

• Ask for help.