Drivetrains 1 Week 8

How is Dynamometer Mode Activated?

• Accelerator pedal needs to be at 90 percent for 10 seconds

• Brake pedal needs to be at 100 percent for 10 seconds

• Accelerator pedal needs to be at 100 percent for 20 seconds

• Accelerator pedal needs to be at 100 percent for 10 seconds

• The Clutch needs to be pressed 100 percent for 10 seconds

What does the x1 value represent?

• Starting point of the new clutch disk

• The wear limit of the clutch disk

• The clutch position while in Drive

• The clutch position while in Neutral

• The Flywheel Speed

What does the X2 value represent

• The wear limit of the clutch disk

• The Clutch travel Gap

• The current clutch disk position

• The deadline Lock position

• The clutch disk temp.

At what grade can the hill start assist feature be activated?

• 3%

• 4%

• 5%

• 2%

• 6%

What connects the TCM housing to the main control housing?

• Cable

• Chain

• Wire Loom

• Ribbon

• Bubble Yum

Countershaft Brake Cylinder is located where?

• Control Housing

• TCM Housing

• In the Range Housing

• In the Main Housing

• In the Clutch Housing

I-Shifts have ___ Shift forks and ____ Range Cylinder(s)

• 3 & 1

• 3 & 2

• 3 & 3

• 3 & 4

• 3 & 8

The number 1 air passage:

• Sends the 1/R fork out

• Brings the 1/R fork in

• Extends the Range cylinder

• Retracts the Range cylinder

• Sends the Slitter fork out

The number 8 air passage:

• Retracts the Range Cylinder

• Extends the Range Cylinder

• Sends the Splitter for out

• Brings the Slitter fork in

• Actuates the clutch Cylinder

In what gear does the control housing need to be in the to be removed from the main housing?

• 1st

• 2nd

• High Range

• Low Range

• Neutral