SRWE - Module 8 - SLAAC and DHCPv6

Refer to the exhibit. A network administrator is configuring a router for DHCPv6 operation. Which conclusion can be drawn based on the commands?

• The DHCPv6 server name is TEST_CLASS
• The router is configured for stateless DHCPv6 operation
• Router is configured for Stateful DHCPv6 operation
• The m flag has been set to 1

A company uses the SLAAC method to configure IPv6 addresses for the employee workstations. Which address will a client use as its default gateway?

• The all-routers multicast address
• The unique local address of the router interface that is attached to the network
• The link-local address of the router interface that is attached to the network
• The global unicast address
• The anycast address

Which method of IPv6 prefix assignment relies on the prefix contained in RA messages?

• SLAAC
• EUI-64
• Static
• Stateful DHCPv6
• Stateful DHCPv4

A network administrator has configured a router for stateless DHCPv6 operation. However, users report that workstations are not receiving DNS server information. Which two router configuration lines should be verified to ensure that stateless DHCPv6 service is properly configured? (Choose two.)

• The address prefix line is included in the ipv6 dhacp pool section
• The domain-name line is included in the ipv6 dhcp pool section
• The ipv6 nd managed-config-flag is entered for th interface that faces the LAN segment
• The ipv6 nd other-config-flag is entered for th interface that faces the LAN segment
• The dns-server line is included in the ipv6 dhcp pool section

Refer to the exhibit. Which statement shown in the output allows router R1 to respond to stateless DHCPv6 requests?

• ipv6 dhcp server LAN1
• ipv6 unicast-routing
• ipv6 nd other-config-flag
• dns-server 2001:db8:6::6
• prefix-delegation 2001:db8:6::/48 003100E84244E70

How does an IPv6 client ensure that it has a unique address after it configures its IPv6 address using the SLAAC allocation method?

• It contacts the DHCPv6 server via a special formed ICMPv6 message
• It sends an ICMPv6 Neighbor Solicitation message with the IPv6 address as the target IPv6 address
• It checks with the IPv6 address database that is hosted by the SLAAC server
• It sends an ARP message with the IPv6 address as the destination IPv6 address
• It sends a BAD message

What two methods can be used to generate an interface ID by an IPv6 host that is using SLAAC? (Choose two.)

• ARP
• DAD
• Stateful DHCPv6
• EUI-64
• Random generation

An administrator wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?

• Stateless DHCPv6
• Stateful DHCPv6
• SLAAC
• RA and EUI-64

What is the correct DHCPv6 operation steps?

• Advertise, Solicit, Reply, Request or Information request
• Discover, Advertise, Request or Information request, Reply
• Solicit, Advertise, request or information request, Reply
• Solicit, Offer, Request or Information request, Reply
• Advertise, Offer, Solicit, Acknowledgment

Which two ICMPv6 messages are used in the SLAAC process? (Choose two.)

• Neighbor Advertisment
• Router Solicitation
• Neighbor Solicitation
• Router Advertisement
• DAD