3004 LO2 24 Electrical Fastenings

AS/NZS 4.1.1 refers to Electrical equipment installations. Which part of AS/NZS 3000 must it satisfy?

• Part 1

• Part 2

• Part 3

• Part 4

• Part 5

Which part of AS/NZS 3000 requires that fixings and fastenings need to be durable against any reasonably expected mechanical, and environmental or other external conditions.

• 1.32

• 1.72

• 2.32

• 2.72

• 3.32

What is the NZS construction standard for timber framed buildings?

• NZS 3004

• NZS 3204

• NZS 3404

• NZS 3604

• NZS 3804

In the standard for the construction standard for timber-framed buildings, what exposure (corrosion) zone is for buildings within 500m of the sea (And sheltered estuaries and inlets)?

• Zone A

• Zone B

• Zone C

• Zone D

• Zone E

In the standard for the construction standard for timber-framed buildings, what exposure (corrosion) zone is for inland areas away from the sea with not much chance of sea spray or salt in the air/wind.?

• Zone A

• Zone B

• Zone C

• Zone D

• Zone E

In the standard for the construction standard for timber-framed buildings, what exposure (corrosion) zone is for inland at the coast where there is a medium risk of sea spray and salt in the air/wind.

• Zone A

• Zone B

• Zone C

• Zone D

• Zone E

NZS **** (building standard) section 4 has information on zones and the durability requirements for fastenings for timber-framed buildings. What is the Fastener corrosion protection level of Standard hot-dip galvanising?

• Low Level

• Medium Level

• High Level

NZS **** (building standard) section 4 has information on zones and the durability requirements for fastenings for timber-framed buildings. What is the Fastener corrosion protection level of 316 stainless steel?

• Low Level

• Medium Level

• High Level

NZS **** (building standard) section 4 has information on zones and the durability requirements for fastenings for timber-framed buildings. What is the Fastener corrosion protection level of Zinc electroplated fittings?

• Low Level

• Medium Level

• High Level

NZS **** (building standard) section 4 has information on zones and the durability requirements for fastenings for timber-framed buildings. What is the Fastener corrosion protection level of Silicon bronze or copper fittings?

• Low Level

• Medium Level

• High Level