6. Apakah kegunaan utama kasut keselamatan?

B. Melindungi kaki dari objek jatuh dan tusukan

D. Memberi keselesaan berjalan.

6. What are the main uses of safety shoes?

B. Protect feet from falling objects and punctures

7. Apakah tindakan pertama sebelum memakai PPE?

B. Semak kerosakan atau kecacatan

C. Serahkan kepada rakan sekerja

8. What type of painting is shown in Figure 2?

C. Electrical Circuit Drawings.

9. Apakah fungsi utama pemutar skru jenis ‘Phillips’?

C. Memasang atau membuka skru berbentuk silang

9. What is the main function of a 'Phillips' type screwdriver?

C. Installing or removing cross-shaped screws

10. Before using an electric drill, what are the main safety precautions?

C. Check the connections and switches

A. Make sure the table is clean

11. What is the purpose of applying oil to hand tools after use?

D. To ensure that the tool does not break

13. What type of painting is shown in Figure 3?

C. Electrical Circuit Drawings.

14. Apakah fungsi utama PPE di Gambar Rajah 4?

Melindungi kepala dari objek jatuh

Melindungi kaki dari objek tajam

14. What is the main function of PPE in Figure 4?

C. Protecting head from falling objects

B. Protecting feet from sharp objects

15. Apakah jenis PPE utama yang dipakai dalam gambar ini?

A. Pelindung kepala, mata & badan

C. Pelindung telinga & respirator

18. Apakah fungsi Sensor (PIR, LDR, dsb.)

C. Untuk mengesan gerakan, cahaya atau suhu dalam sistem automasi.

18. What is the function of the Sensor (PIR, LDR, etc.)

C. To detect motion, light or temperature in an automation system.

19. Power supply / adaptor digunakan untuk?

D. Membekalkan voltan yang diperlukan kepada sistem atau modul

A. Panduan pemasangan mengikut spesifikasi projek

B. Membekalkan informasi kepada sistem atau modul

C. Untuk mengesan gerakan, cahaya atau suhu dalam sistem automasi.

19. Power supply / adapter used for?

D. To supply the required voltage to the system or module

A. Installation guide according to project specifications

B. Providing information to a system or module

C. To detect motion, light or temperature in an automation system.

20. Apakah kegunaan Sarung tangan keselamatan?

D. Melindungi tangan semasa bekerja dengan peralatan tajam / elektrik.

A. Panduan pemasangan mengikut spesifikasi projek.

B. Membekalkan informasi kepada sistem atau modul.

C. Untuk mengesan gerakan, cahaya atau suhu dalam sistem automasi.

20. What are the uses of safety gloves?

D. Protect hands when working with sharp/electrical equipment

A. Installation guide according to project specifications

B. Providing information to a system or module

C. To detect motion, light or temperature in automation systems

21. Dalam kerja pemasangan, penyelenggaraan atau operasi teknikal, pematuhan kepada akta-akta ini sangat penting untuk:

B. Menjamin keselamatan pekerja

A. Menambah baik skill yang ada

22. Yang manakah merupakan Akta Fokus Keselamatan?

A. Akta 514 (OSHA), Keselamatan dan Kesihatan Pekerja

C. Akta 5645 (PDJK), Menyelam Laut

D. Akta 743 (SDTK), Kerja Siap Cepat

22. Which is the Security Focus Act?

A. Act 514 (OSHA), Occupational Safety and Health

D. Act 743 (SDTK), Quick Completion Work

23. Gambar Rajah 7 Apakah fungsi keselamatan alat yang di tunjukan di Gambar Rajah 7?

D. Melindungi kaki daripada objek berat, paku tajam, bahan kimia atau renjatan.

A. Melindungi semasa kerja di tempat tinggi atau operasi khas.

B. Meningkatkan keterlihatan semasa bekerja di kawasan gelap atau trafik.

C. Melindungi pendengaran daripada bunyi bising berlebihan (lebih 85 dB)

23. Figure 7 What is the safety function of the device shown in Figure 7?

D. Protects feet from heavy objects, sharp nails, chemicals or shock.

A. Protects during work at heights or special operations.

B. Increases visibility when working in dark areas or traffic.

C. Protects hearing from excessive noise (over 85 dB)

24. Gambar Rajah 8 Apakah fungsi keselamatan alat yang di tunjukan di Gambar Rajah 8?

C. Melindungi pendengaran daripada bunyi bising berlebihan (lebih 85 dB)

A. Melindungi semasa kerja di tempat tinggi atau operasi khas.

B. Meningkatkan keterlihatan semasa bekerja di kawasan gelap atau trafik.

D. Melindungi kaki daripada objek berat, paku tajam, bahan kimia atau renjatan.

24. What is the safety function of the device shown in Figure 8?

C. Protects hearing from excessive noise (over 85 dB).

A. Protects during work at heights or special operations.

B. Increases visibility when working in dark areas or traffic.

D. Protects feet from heavy objects, sharp nails, chemicals or shock.

25. Apakah fungsi keselamatan alat yang di tunjukan di Gambar Rajah 9?

A. Melindungi semasa kerja di tempat tinggi atau operasi khas.

B. Meningkatkan keterlihatan semasa bekerja di kawasan gelap atau trafik.

C. Melindungi pendengaran daripada bunyi bising berlebihan (lebih 85 dB).

D. Melindungi kaki daripada objek berat, paku tajam, bahan kimia atau renjatan.

25. What is the safety function of the device shown in Figure 9?

A. Protects during work at heights or special operations.

B. Increases visibility when working in dark areas or traffic.

C. Protects hearing from excessive noise (over 85 dB).

D. Protects feet from heavy objects, sharp nails, chemicals or shock.

26. Gambar Rajah 10 Apakah fungsi keselamatan alat yang di tunjukan di Gambar Rajah 10?

B. Meningkatkan keterlihatan semasa bekerja di kawasan gelap atau trafik.

A. Melindungi semasa kerja di tempat tinggi atau operasi khas.

C. Melindungi pendengaran daripada bunyi bising berlebihan (lebih 85 dB).

D. Melindungi kaki daripada objek berat, paku tajam, bahan kimia atau renjatan.

CU4 WA1

Quiz

•

Engineering

•

12th Grade

•

Practice Problem

•

Hard

JOVAN ANTHONY ROCK EDWARD

Used 1+ times

FREE Resource

72 questions

Show all answers

1.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

1. Apakah Dua (2) amalan dalam pemasangan sistem automasi?
I. Membuat kerja dengan cepat.
II. Mematuhi keselamatan kerja.
III. Menyemak dan menguji sambungan selepas pemasangan.
IV. Menjimat wang dengan memasang component murah.

A. I and II

B. III and IV

C. II and III

D. I and IV

2.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

1. What is Two (2) practices in installing automation systems?
I. Get the job done quickly.
II. Comply with work safety.
III. Check and test the connections after installation.
IV. Save money by installing cheap components.

A. I and II

B. III and IV

C. II and III

D. I and IV

3.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

2. Apakah makna “Sub-assembly” di khusus mekatronik?

A. Mencantum atau memasang semua bahan kerja menjadi satu unit yang lengkap untuk tujuan penguan tertentu.

B. Mematuhi keselamatan kerja.

C. Membuat laporan penilaian kerja selepas mendapat jana.

D. Menganalisis semua component tertentu untuk mempromosikan barang jualan.

4.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

2. What is the meaning of "Sub-assembly" specifically in mechatronics?

A. Joining or assembling all the workpieces into a single unit complete for a specific purpose.

B. Comply with work safety.

C. Make a work evaluation report after receiving the salary.

D. Analyze all specific components to promote sales items.

5.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

3. Apakah jenis lukisan yang di tunjakn di Gambar rajah 1?

A. Lukisan Pemasangan.

B. Lukisan Mekanikal

C. Lukisan Elektrikal.

D. Lukisan Elektronik

6.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

3. What type of painting is shown in Figure 1?

A. Installation Drawing.

B. Mechanical Drawing

C. Electrical Drawing.

D. Electronic Drawing

7.

MULTIPLE CHOICE QUESTION

1 min • 1 pt

4. Apakah maksud singkatan PPE?

A. Personal Protection Equipment

B. Professional Protective Equipment

C. Personal Protective Equipment

D. Permanent Protection Equipment

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Popular Resources on Wayground

5 questions

This is not a...winter edition (Drawing game)

Quiz

•

1st - 5th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

10 questions

Identify Iconic Christmas Movie Scenes

Interactive video

•

6th - 10th Grade

20 questions

Christmas Trivia

Quiz

•

6th - 8th Grade

18 questions

Kids Christmas Trivia

Quiz

•

KG - 5th Grade

11 questions

How well do you know your Christmas Characters?

Lesson

•

3rd Grade

14 questions

Christmas Trivia

Quiz

•

5th Grade

20 questions

How the Grinch Stole Christmas

Quiz

•

5th Grade

Discover more resources for Engineering

26 questions

Christmas Movie Trivia

Lesson

•

8th Grade - Professio...

15 questions

Christmas Song Emoji Pictionary

Quiz

•

7th - 12th Grade

20 questions

Christmas Movies

Quiz

•

1st - 12th Grade

55 questions

CHS Holiday Trivia

Quiz

•

12th Grade

20 questions

Christmas Movie Trivia

Quiz

•

9th - 12th Grade

29 questions

christmas facts

Lesson

•

5th - 12th Grade

20 questions

Christmas Trivia

Quiz

•

5th - 12th Grade

20 questions

Stages of Meiosis

Quiz

•

9th - 12th Grade

CU4 WA1

72 questions

1. Apakah Dua (2) amalan dalam pemasangan sistem automasi?
I. Membuat kerja dengan cepat.
II. Mematuhi keselamatan kerja.
III. Menyemak dan menguji sambungan selepas pemasangan.
IV. Menjimat wang dengan memasang component murah.

1. What is Two (2) practices in installing automation systems?
I. Get the job done quickly.
II. Comply with work safety.
III. Check and test the connections after installation.
IV. Save money by installing cheap components.

2. Apakah makna “Sub-assembly” di khusus mekatronik?

2. What is the meaning of "Sub-assembly" specifically in mechatronics?

3. Apakah jenis lukisan yang di tunjakn di Gambar rajah 1?

3. What type of painting is shown in Figure 1?

4. Apakah maksud singkatan PPE?

4. What does the abbreviation PPE stand for?

5. Manakah peralatan pengujian biasa digunakan?
I. Multimeter
II. Test pen
III. Periuk
IV. Pembaris

5. Which testing equipment is commonly used?
I. Multimeter
II. Test pen
III. Pot
IV. Ruler

Access all questions and much more by creating a free account

Popular Resources on Wayground

Discover more resources for Engineering

CU4 WA1

72 questions

1. Apakah Dua (2) amalan dalam pemasangan sistem automasi? I. Membuat kerja dengan cepat. II. Mematuhi keselamatan kerja. III. Menyemak dan menguji sambungan selepas pemasangan. IV. Menjimat wang dengan memasang component murah.

1. What is Two (2) practices in installing automation systems? I. Get the job done quickly. II. Comply with work safety. III. Check and test the connections after installation. IV. Save money by installing cheap components.

2. Apakah makna “Sub-assembly” di khusus mekatronik?

2. What is the meaning of "Sub-assembly" specifically in mechatronics?

3. Apakah jenis lukisan yang di tunjakn di Gambar rajah 1?

3. What type of painting is shown in Figure 1?

4. Apakah maksud singkatan PPE?

4. What does the abbreviation PPE stand for?

5. Manakah peralatan pengujian biasa digunakan? I. Multimeter II. Test pen III. Periuk IV. Pembaris

5. Which testing equipment is commonly used? I. Multimeter II. Test pen III. Pot IV. Ruler

Access all questions and much more by creating a free account

Popular Resources on Wayground

Discover more resources for Engineering

1. Apakah Dua (2) amalan dalam pemasangan sistem automasi?
I. Membuat kerja dengan cepat.
II. Mematuhi keselamatan kerja.
III. Menyemak dan menguji sambungan selepas pemasangan.
IV. Menjimat wang dengan memasang component murah.

1. What is Two (2) practices in installing automation systems?
I. Get the job done quickly.
II. Comply with work safety.
III. Check and test the connections after installation.
IV. Save money by installing cheap components.

5. Manakah peralatan pengujian biasa digunakan?
I. Multimeter
II. Test pen
III. Periuk
IV. Pembaris

5. Which testing equipment is commonly used?
I. Multimeter
II. Test pen
III. Pot
IV. Ruler