NEW
Font size
S
M
L
XL
WorksheetsAutomatic Transmission Technology A2 Pretest
Total questions: 25
Worksheet time: 26mins
Name
Class
Date
1.
what is the purpose of a transmission?
a)
it allows you to idle and drive smoothly
b)
It lets you pull caravans
c)
it allows you to idle and control torque and speed output
d)
it allows you to idle,control torque and speed output and change direction
2.
What is this?
a)
Flywheel
b)
Fluid Pump
c)
Torque converter
d)
Flex plate
3.
Is this gearbox a transverse or inline type?
a)
Transverse
b)
Inline
c)
Ford
d)
All Wheel Drive
4.
True or False: Gears next to each other turn in the same direction.
a)
True
b)
False
5.
What type of gear set is this?
a)
Spur
b)
Helical
c)
Sequential
d)
Bevel
6.
A twisting force applied to a shaft is known as ________.
a)
Torque
b)
Work
c)
Foot pounds
d)
Newton meters
7.
What type of gear set is this?
a)
Spur
b)
Helical
c)
Sequential
d)
Bevel
8.
What is the purpose of detents?
a)
To aid in gear changes
b)
To hold the gearbox in gear
c)
To stop the driver from selecting 2 gears at once
d)
To synchronize the gear
9.
What type of gear set is this?
a)
Helical
b)
Spur
c)
Bevel
d)
Double Helical
10.
What is a disadvantage of a spur gear over a helical gear?
a)
It produces more noise
b)
Its less efficient
c)
Its stronger
d)
Its heavier
11.
The equation for working out gear ratios is?
a)
Gear ratio = No of teeth on driven gear / No of teeth on the driver gear
b)
Gear ratio = No of teeth on driven gear multiplied by No of teeth on the driver gear
c)
Gear ratio = No of teeth on driver gear / No of teeth on the driven gear
12.
A type of gear used for transmitting motion and power between non-intersecting shafts, usually at 90° to each other.
a)
Worm Gear
b)
Plate Cam
c)
Sun Gear
d)
Planetary Gear
13.
The center gear of a planetary gear set.
a)
Sun Gear
b)
Planet Gear
c)
Ring Gear
d)
Spline
14.
Gear A has 30 teeth, Gear B has 10 teeth. Gear B must spin _______ time(s) for every 1 rotation of Gear A.
a)
1
b)
2
c)
3
d)
4
15.
Gear A has 50 teeth, Gear B has 100 teeth. Gear B is spinning at 1,000 RPM driving Gear A, how fast is Gear A spinning?
a)
1,000 RPM
b)
2,000 RPM
c)
3,000 RPM
d)
20,000 RPM
16.
When gears are equal in size, what is the gear ratio?
a)
1:2
b)
1:3
c)
2:5
d)
1:1
17.
The gears in between the sun and ring gears in a planetary gear set.
a)
Planet Gear
b)
Sun Gear
c)
Ring Gear
d)
Bevel Gear
18.
Looking at the picture, what is the gear ratio?
a)
6:10
b)
3:10
c)
10:6
d)
3:5
19.
When a drive gear is larger than a driven gear the output is.....
a)
More Speed
b)
More Torque
c)
Less Speed
d)
Change in angle
20.
The drive gear has 12 teeth,the idler has 60 teeth and the driven has 12 teeth, what is the ratio?
a)
1:5:7
b)
7:5:1
c)
1:1
21.
Clutches, servos and one way clutches are all ________?
a)
Hold Devices
b)
Friction Materials
c)
Apply Devices
d)
Electronic
22.
Technician A says an automatic transmission's valve body connects and disconnects the engine and transmission. Technician B says an automatic transmission's torque converter connects and disconnects the engine and transmission. Who is right?
a)
Technician A only
b)
Technician B only
c)
Both Tech A and B
d)
Neither Tech A nor B
23.
Technician A says a planetary gearset will act as a solid unit when two of its members are held. Technician B says a planetary gearset will act as a solid unit when one of its members is held. Who is right?
a)
Technician A only
b)
Technician B only
c)
Both Tech A and B
d)
Neither Tech A nor B
24.
Technician A says a planetary gearset will act as a solid unit when two of its members are held. Technician B says a planetary gearset will act as a solid unit when one of its members is held. Who is right?
a)
Technician A only
b)
Technician B only
c)
Both Tech A and B
d)
Neither Tech A nor B
25.
Which of the following is not a basic component of a modern automatic transmission?
a)
Pinion seals
b)
Pistons and Servos
c)
Planetary gearsets
d)
Transmission bands
Reset
