NEW
Font size
S
M
L
XL
WorksheetsSterile Processing IV & Compounding Review: Theory 3-6
Total questions: 30
Worksheet time: 1hrs 7mins
Name
Class
Date
1.
Which is not an area addressed by USP 797?
a)
Expiration Dates
b)
Avoiding drug interactions
c)
Environmental quality & control
d)
Contamination risk levels
2.
If _____________ are worn in a clean room they must be covered with a lab coat or gown at all times even when they are not in the clean room.
a)
Gloves
b)
Mask
c)
Scrubs
d)
Shoe Covers
3.
Whenever ________ agents are stored in the same refrigerator, they must also be labeled and separated from other drugs.
a)
Chemotherapy drugs
b)
Hazardous drugs
c)
Cytotoxic
d)
All the above
4.
An administration set is required for an IV solution to be infused.
a)
True
b)
False
5.
A ___________ is used to puncture the rubber diaphragm located inside the administration set.
a)
Drip Chamber
b)
Additive Port
c)
Needle Adaptor
d)
Spike
6.
A __________ is the clean zone where all sterile compounding manipulations should be performed.
a)
High Efficiency Particulate Air Filter (HEPA)
b)
Pre Filter
c)
Work Surface
d)
All of the above
7.
When working in a horizontal laminar airflow hood, all manipulations should be performed at least _______ inches within the hood to prevent contamination of mixed air.
a)
3
b)
4
c)
5
d)
6
8.
The horizontal flow hood should be left on at all times to assure proper aseptic conditions . If turned off, the hood should be allowed to run at least ___________ minutes prior to use.
a)
10
b)
15
c)
30
d)
45
9.
A ________ is used to prevent the introduction of particulate matter.
a)
Filter Device
b)
Needle Adaptor
c)
Roll Clamp
d)
None of the above
10.
The Additive Port is used to regulate the rate of infusion.
a)
True
b)
False
11.
The laminar airflow hood should be given a thorough cleaning with isopropyl alcohol ______________.
a)
Every six months
b)
At the end of the day
c)
Every 30 days
d)
At the start of the day & several times a day
12.
An example of a quality control measure when mixing a sterile product would be _____________.
a)
Turning the hood on right before starting to mix compound
b)
Cleaning all interior work surfaces of the hood with isopropyl alcohol
c)
Turning on the air conditioner to keep the area cool
d)
Placing all the necessary materials on the shelf behind the hood
13.
If the blower on a laminar airflow hood or barrier isolator is turned off then only TWO persons can enter the buffer area for the purposes of turning on the blower and of sanitizing the work surface for a minimum of 30 minutes .
a)
True
b)
False
14.
A medication order to give the patient 30 mL of Mylanta. How many fluid ounces is this?
a)
0.5 fl oz
b)
3 fl oz
c)
1 fl oz
d)
4 fl oz
15.
All areas of the Hood should be cleaned except:
a)
Inside of glass shield
b)
The HEPA filter protective grill
c)
Back Wall
d)
The Sides
16.
For a sterile solution to be administered correctly, the label must contain specialized information & instruction except:
a)
Date and time of expiration
b)
SSN
c)
Names, concentrations, & amounts of all additives
d)
None of the above
17.
Infection by definition is the successful invasion of the body by pathogenic organisms, the reaction of tissue to their presence, and the toxins generated by them .
a)
True
b)
False
18.
_____________ contact through touching between an infected source and a host (example: touching a wound)
a)
Direct
b)
Indirect
c)
Droplet
d)
None of the above
19.
Staphylococcus and Streptococcus are bacteria so light in weight that they can stay suspended in air and be carried by air currents.
a)
True
b)
False
20.
Which of the following components of the syringe must remain sterile?
a)
Tip
b)
Barrel
c)
Inner core of plunger
d)
Both the syringe tip & inner core of the plunger should remain sterile
21.
_________ deals with policies & procedures related to compounding sterile products.
a)
Process Validation
b)
USP/NF 797
c)
Quality Control
d)
Quality Assurance
22.
Measured & documented evidence, providing a high degree of assurance that a specific process will consistently produce a product meeting its predetermined specifications and quality attributes:
a)
Process Validation
b)
USP/NF 797
c)
Quality Control
d)
Aseptic Preparation
23.
The USP/797 requires daily monitoring and documentation of refrigerators to ensure that the temperature remains between ___________° Celsius .
a)
2 to 8
b)
4 to 10
c)
6 to 12
d)
8 to 14
24.
Bacteria spread by droplets use a vectorborne mode of transmission .
a)
True
b)
False
25.
8 oz equals how many tsp?
a)
15
b)
30
c)
48
d)
60
26.
The cover protecting the Intravenous Administration set spike should not be removed outside of the hood prior to inserting it into the IV bag administration set port because it must remain sterile at all times .
a)
True
b)
False
27.
The High Efficiency Particulate Air (HEPA) filter removes particulates and microorganisms from the air that are ________.
a)
0.5 microns & smaller
b)
Vapors & Gases
c)
0.3 microns & larger
d)
All the above are correct
28.
Alcohols have excellent in vitro germicidal activity against?
a)
gram-positive vegetative bacteria
b)
gram-negative vegetative bacteria
c)
multi-drug-resistant pathogens
d)
All of the above
29.
In which laminar airflow hood is the HEPA filter located at the back of the hood facing the preparer?
a)
vertical airflow
b)
horizontal airflow
c)
biological safety cabinet
d)
all of the above
30.
The Acronym TPN stands for:
a)
The Pharmacy Network
b)
Total Parenteral Nutrition
c)
Time Prognosis Number
d)
Toxicity Per Nitroglycerin
Reset
