WorksheetsApparel Review #2
Total questions: 22
Worksheet time: 11mins
Which small measuring tool with a sliding marker should Morgan use to measure the amount of fabric to turn up for a hem?
Yard stick
Sewing or seam gauge
Measuring tape
Transparent ruler
Which tool is used to take body measurements
Yard stick
Sewing or seam gauge
Measuring tape
Transparent ruler
Austin needed to iron his dress pants before going to work. When he placed the iron onto his pants, the fabric melted. What pressing equipment should he use in the future to prevent this from happening?
Tailor's ham
Seam gauge
Seam roll
Press cloth
Which type of pins are specially designed for use on knit fabrics to prevent snags?
Silk pins
T-pins
Safety pins
Ballpoint pins
Which perfectly timed machine part moves fabric through the sewing machine?
Presser foot
Hand wheel
Feed dog
Bobbin
Nick placed a small pattern on his fabric. He used a marking tool to outline the entire pattern piece. Any stray marks remaining on the fabric can be brushed off at a later time when using:
fabric marking pens
tracing wheels
tailor's chalk
thread
7.
An important safety rule for both the sewing machine and serger is:
never sew two layers of fabric
never sew over pins
Never adjust the tension
never turn the handwheel
Brianna wants to quickly complete the construction of her knit skirt. She chose to use a serger because it performs all of these steps at the same time?
Baste, seam, and fold
Finish, press, and seam
Trim, seam, and finish
Seam, fold, and finish
Shania is cutting the fabric for a sewing project. Which bent-handled tool should be used?
Dressmaker shears
seam ripper
rotary cutter
pinking shears
The sewing machine needle should be disengaged when:
beginning to sew the project
test stitching on a scrap of the fabric
sewing at a high speed
winding the bobbin
Janet is worried about her pattern markings showing on her finished project. Which tool can she use that will disappear over time or when treated with water?
Fabric marking pen
tracing wheel
tailor's chalk
thread
The proper technique for pressing seams is to:
hold the iron above the fabric and use steam
glide the iron back and forth over the fabric
raise and lower the iron onto the fabric
hold the ion in place on the fabric for at least 10 seonds
Jenna is taking Presley’s body measurements to find her pattern size. Which tool should she use?
yard stick
sewing or seam gauge
measuring tape
transparent ruler
John’s sewing machine is not stitching properly and is making a loud noise, so he stops immediately. What should he do next?
check the threading
adjust the tension
ignore it and keep stitching
shorten the stitch length
Which part of the machine forms the bottom portion of the stitch?
presser foot
handwheel
feed dog
bobbin
Which machine part holds the fabric in place while stitching
Presser foot
hand wheel
feed dog
bobbin
Which tool has a round blade and is used with a self-healing mat and transparent ruler for cutting straight lines?
dressmaker shears
seam ripper
rotary cutter
pinking shears
What technique should be used to control the extra fullness and sew two pieces of fabric together that are slightly different sizes?
Clipping
dart
trimming
easing
When stitching a standard seam on a sewing machine, what stitch length setting should be used?
2-3 stitches per inch
6-8 stitches per inch
10-12 stitches per inch
15-20 stitches per inch
Juan is applying a pocket to his pants. He is going to sew a row of stitching that will be visible on the outside of the finished garment. This is an example of:
topstitching
backstitching
reinforcement
zigzag
A small coin wallet bought at a craft fair is not holding up well. The seams are pulling apart at the ends. Which stitches should be used to prevent this problem?
topstitching
backstitching
staystitching
zigzag
Jamie needs to strengthen the corners of his pillow so they will not break open when turned and stuffed. Which stitches should be used?
topstitching
backstitching
reinforcement
zigzag
