A type of vehicle jack that uses oil under pressure to lift vehicles

A trench permanently fitted into the floor of the shop to allow easy work access to the vehicle's underside

The maximum safe lifting load for lifting equipment.

A type of vehicle hoist that uses two parts (one on each side of vehicle) and four arms to lift the vehicle.

A type of vehicle hoist that uses a single central platform to lift a vehicle.

A type of hoist onto which a vehicle is driven, that uses two long, narrow platforms to lift the vehicle.

It is good practice for the service adviser to perform a(n) ______ with the customer to point out any existing damage or missing components on the vehicle.

Battery electolyte contains acid, which can be cleaned up by neutralizing it with which of the following materials

There are three main types of mechanisms that provide the lifting action for vehicle jacks including all of the following, except:

What type of jack is mounted on four wheels, two of which swivel to provide a steering mechanism?

Often used on farms, what type of jack is designed to lift, winch, clamp, pull, and push.

What type of jack uses compressed air to either operate a large ram or inflate an expandable air bag to lift the vehicle

Which lifting device is useful for raising a vehicle to a height that removes the need for the technician to bend down?

What type of hoist comes in two configurations-symmetrical and asymmetrical?

The engine or component to be lifted is attached to the lifting arm of an engine hoist by which of the following?

The size of the vehicle jack you use will be determined by:

Customers expect their vehicles to be treated with care and respect while in your shop.

Fender, carpet, seat, and steering wheel covers should be the first thing on and the last thing removed when working on vehicles.

Never place tools in your back pocket.

Only the most skilled and experienced drivers available should be allowed to test-drive higher performance vehicles.

When multiple pieces of lifting equipment are used, the safe working load is determined by the highest rated piece of equipment.

Vehicle jacks may be used to support the weight of the vehicle during any task that requires you to get underneath any part of the vehicle.

High-lift jacks are usually fitted in pairs to four-post hoists as an accessory to allow the vehicle to be lifted off the drive-on hoist runways.

Tall jack stands are used to stabilize a vehicle up on the hoist that is having a heavy component, such as transaxle, removed or installed.

Since the vehicle rests on the wheels on the four-post hoist, the wheels cannot be removed, unless the hoist is fitted with sliding bridge jacks.

Every vehicle hoist in the shop must have a built-in mechanical locking device so that the vehicle hoist can be secured at the chosen height after the vehicle is raised.

_______ are a protective layer used to cover the fenders when work is conducted around the engine bay.

If spills do occur, be sure to clean them up thoroughly using appropriate methods, which can usually be found in the _____________ sheets for each material.

Special ______ materials in granular form can be used on some liquid spills such as engine oil.

Often _____ _____ will be used by someone directing you to maneuver the vehicle.

When using lifting equipment always maintain some ___________ as an extra safety margin.

Lifting equipment should be periodically ______ and _______ to make sure i is safe.

A (n) ___________ jack is a portable jack that usually has either a mechanical screw or a hydraulic ram mechanism that rises vertically from the center of the jack as the handle is operated.

__________ two-post hoists have arms that are of approximately equal length so that the vehicle is roughly centered lengthwise between the posts.

The lifting arm of the _________ __________ is moved by a hydraulic cylinder and is adjustable for length.

A (n) ________ _______ ________ allows the technician to access the underside of the vehicle without the need for a hoist or jacks to raise the vehicle.

What type of jack is this?

What type of jack is this?

What type of jack is this?

What kind of hoist is this?

What kind of hoist is this?