Font size
WorksheetsMetal Lathe
Total questions: 20
Worksheet time: 10mins
What should be keep clear before using a metal lathe?
Jewelry
Loose Clothing
Long Hair
Hoodie Strings
Shoes
What should be in place before using a machine?
Guards
Quick Change
Locks
Axle Hyperbole
What safety Equipment should be used when operating the metal lathe?
Safety Glasses
Shop Apron
Combat boots
Welding mask
What should you remove before starting the machine?
Chuck Key
Workpiece
Tools
Tail stock
How should you clear away chips?
Brush
Hand
Air hose
Water
Work should be ___________ before starting the machine.
Secure
Confident
Shinny
Organized
When filing or sanding, How should you handle this process?
Hold the file/ Sand paper in your right hand and keep your hand 4" away from the chuck.
Hold the file behind the lathe and press hardly
Hold the file/ Sandpaper under the workpiece
Hold the file/ Sandpaper with one finger right next to the chuck.
When you stop the machine, what should you do?
Wait for the machine to coast to a stop
stop the machine with your hand and leave
walk away after turning off the machine
Leave the machine running
What does the tailstock do?
Helps to support the work piece and allows drilling operations.
Allows tails to be cut onto the workpiece
keeps the lathe from falling apart
prevents stock from falling off the end of the lathe
What part holds the work piece tight?
Chuck
Tail Stock
Clutch
Saddle
What houses the motor and supports the chuck to spin the workpiece?
Head Stock
Tail Stock
Chuck
Cross Slide
What does the cross slide do?
Moves the tool holder on the Y axis
Moves the tool holder on the X axis
Moves the tools holder on the Z axis
Moves the tools holder on the axis and allies
What does the Compound slide do?
Moves the tool holder on the Y axis
Moves the tool holder on the X axis
Moves the tools holder on the Z axis
Moves the tools holder on the axis and allies
What does this bit do?
Cuts material to thickness
Cuts flat surfaces on the right side
Cuts flat surfaces on the left side
Applies a grip pattern
What does this bit do?
Cuts material to thickness
Cuts flat surfaces on the right side
Cuts flat surfaces on the left side
Applies a grip pattern
What does this bit do?
Cuts material to thickness
Cuts flat surfaces on the right side
Cuts flat surfaces on the left side
Applies a grip pattern
What does this bit do?
Cuts material to thickness
Cuts flat surfaces on the right side
Cuts flat surfaces on the left side
Applies a grip pattern
What does this wheel control?
The cross slide
The compound slide
The spindle speed
It's the wheel of destiny
What does this wheel control?
The cross slide
The compound slide
The spindle speed
It's the wheel of destiny
how does the lathe cut material?
It rotates stock and applies a bit to carve a shape
It rotates a bit and carves into a piece
It uses lazers to inspect material
I donno?
