Electricians use a ____ print to locate service cables.

A(n) ____ print contains symbols that represent outlet receptacles and panels.

Items found in a title block include ____.

Changes and corrections are recorded in the ____ on a print.

Use a drawing’s ____ to determine the size of an undimensioned object.

If a wall measures 1 1/2" on a drawing with a scale of 1/4"=1', what is the dimension of the actual wall?

A size C print measures ____.

What is the smallest size of paper a 30' x 40' house, drawn at a scale of 1/4"=1', will fit on? Do not account for a title block and border.

If a symbol is nonstandard or has special notation, you should refer to the _____ to learn the meaning of the symbol.

A curved line drawn from one device to another represents a ____.

Solid curved lines represent ____.

Heavy lines on a drawing represent ____.

A branch circuit home run to the panel is identified on a drawing with a(n) ____.

Items such as fixtures, power requirements, and receptacles are listed in a ____ to save print reading time.

Which is not a schedule an electrician would use?

Notes that are grouped together and located at the bottom or side of the drawing are called ____ notes

Notes that cover a specific location of the drawing are called ____ notes.

The documents that list the items of a schedule are called ____.

What should you do if a print has a list of parts that is different from the list on the specifications?

Specifications may contain ____.

The most informative and authoritative body of information concerning electrical wiring installation in the United States is the ____.

The National Electrical Code committee is assembled by the ____.

The group of people responsible for approving an electrical installation is the ____.

In addition to the authority having jurisdiction, which of the following may impose licensing requirements on an electrical installation?

Electrical material manufacturers submit equipment to this group for testing.

An electrical device that receives certification from an NRTL may be referred to a _____ product.

The NEC is the authority having jurisdiction in electrical wiring.

If local communities use the NEC, they must use the entire book.

NRTL is an acronym for nationally recognized testing laboratory.

The NEC covers solar and other renewable energy systems.

Some older prints may have white lines on a blue background.

Each group of workers on a project receives a set of prints.

A foundation print will show where service cables will pass through a concrete wall.

A plumbing print contains no information needed by an electrician.

A floor plan is useful for locating receptacles and switches.

Electrical prints may not have all equipment locations completely dimensioned

An electrical print is based on information found in the specifications.

The title block contains the drawing scale.

A print that is D size is twice as large as an A size print

The scale of a drawing will help you determine the length of a conduit run.

A wall on a drawing that has a scale of 1/4"=1' is 1/48th the size of the actual wall.

A wall that measures 2" on a drawing that has a scale of 1/8'=1" is 8" long.

All electrical prints use the same symbols for common equipment, such as GFCI receptacles.

Solid curved lines on a drawing represent circuits that are concealed in a wall.

Lines made of short dashes represent exposed wiring.

Circuits are not drawn completely to the circuit breaker panel.

Electrical schedules list the dates that specific equipment will be installed.

The most informative and authoritative body of information concerning electrical wiring installation is the NEC.

The person or group of people responsible for approving the equipment, materials, installation, or procedure is the AHJ.

If a local code rule differs from an NEC rule, the local code rule must be followed.

Documents included with prints that define who is responsible for completing specific tasks are called specifications.

The agency responsible for creating and enforcing health and safety standards to protect persons in all occupations is the OSHA?

Details about the structural elements of a building are given on a(n) ______________________________ print

The electrical print is usually created directly from the_______.

On a print, the area that contains the name of the creator of the drawing is the title block.

The ratio of the size of an object to the size of the object on a drawing is called scale.

Article ______________________________ of the NEC provides essential definitions used through the code book.

Curved lines drawn from one device to another represent __________.

A chart listing the circuits, circuit breakers, and equipment served by each circuit is found in the panel schedule.