Font size
WorksheetsMassive Pneumatics Quiz
Total questions: 77
Worksheet time: 43mins
A pressure regulator is positioned ____ a Air Reservoir
Before
After
The difference between single acting and double acting cylinders is:
Single acting cylinders are smaller than Double acting cylinders
Double acting cylinders have two pistons
Work can be done in two directions in double acting cylinder unlike single acting cylinders.
This schematic diagram is called -----
3/2 normally Closed valve
3/2 normally Open valve
Pilot Valve
What is the function of single acting cylinder?
Are a device that will give rotational motion when supplied by air
Used to Control the Air supply to the system and increase efficiency
Used to convert the
pressure energy to mechanical energy (linear force in two directions)
Used to convert the
pressure energy to mechanical energy (linear force in one direction only)
What is the function of double acting cylinder?
Are a device that will give rotational motion when supplied by air
Used to Control the Air supply to the system and increase efficiency
Used to convert the
pressure energy to mechanical energy (linear force in two directions)
Used to convert the
pressure energy to mechanical energy (linear force in one direction only)
Which of the following is the symbol of single acting cylinder?
Which of the following is the symbol of double acting cylinder?
which of the following best describes the shown pneumatic circuit?
Direct control of single acting cylinder
Indirect control of single acting cylinder
Direct control of double acting cylinder
indirect control of double acting cylinder
What is the function of the following component: Air Tank
Store and stabilize compressed air
Used to provide multi equal pressure outlets
To keep the operating pressure of the system virtually constant regardless fluctuations in the pressure line
To provide the pneumatic system with well cleaned, lubricated and regulated compressed air
What is the function of the following component: Pressure Regulator
Store and stabilize compressed air
Used to provide multi equal pressure outlets
To keep the operating pressure of the system virtually constant regardless fluctuations in the pressure line
To provide the pneumatic system with well cleaned, lubricated and regulated compressed air
Why compressor is adjusted to provide a little higher pressure than the designed operating pressure?
Due to safety reasons
Due to water condensate removal
Due to pressure loss in the distribution system
Due to energy consumption reasons
Hydraulic Systems use what to create power?
Air
Fluid
Electricity
Wind
Pneumatic Systems use what to create power?
Air
Fluid
Electricity
Wind
Air pressure can be stored for use at a later time.
True
False
Air is compressible.
True
False
Hydraulic Fluid is almost always non-compressible.
True
False
Hydraulic cylinders usually create what type of motion?
Rotational
Linear
None of the Above
What is the use of the cushioning of a double-acting cylinder?
It protects the cylinder against excessively high air pressure.
It reduces the noise of the escaped air.
It prevents a hard striking of the piston at the end positions.
It holds the piston in position.
It controls the speed motion of the cylinder during extension.
Which statement about a single-acting cylinder is correct?
The retraction of the piston is usually achieved by a spring.
The piston speeds in extension and retraction can be set.
Both piston sides will alternately be pressurized with compressed air.
Work can be conducted during extension and retraction of the piston.
It has a larger air consumption than a double-acting cylinder.
A pneumatic valve is defined as a 5/2 - way valve. What does the number 5 mean in this definition?
The valve has a port for the exhaust.
The valve has 5 switching positions.
The valve has a neutral position and 4 other switching positions.
The valve has 5 ports.
The valve has 5 ports for work conductions.
A pneumatic valve is defined as a “5/3-valve”. What do the numbers 5/3 mean in this definition?
The valve has a port for the exhaust.
The valve has 5 switching positions and 3 ports.
The valve has a neutral position and 4 other switching positions.
The valve has 5 ports and 3 switching positions.
The valve has 5 ports for work conductions and a neutral position.
Which of the following statements explains fluid power.
Fluid power is the method of using pressurized fluid to transmit energy
Fluid power is the method of using pressurized fluid to transmit motion.
Fluid power is the method of using pressurized fluid to transmit machines
Fluid power is the method of using pressurized air to transmit energy
What are the two branches of Fluid Power.
Pneumatics and Hydrogen
Pneumatics and Horsepower
Pneumatics and Hydraulics
Pneumatics and Horoscops
Hydraulic systems use ________ to transfer force from one point to another.
Air
Liquid
Solid
Gas
Air is compressible and liquid is incompressible.
True
False
Select the machine which does not use hydraulics.
Which of the following is not an electro-mechanical device?
DC Motor
Relay
Resistor
Solenoid
How many positions does this DCV have?
4
3
2
None of the Above
Programmable Logic Controllers (PLC) take the place of which of the following on the manufacturing floor?
Personal Computer
Electrical Relay Logic
All of the above
None of the above
A limit switch is an example of a device that provides a digital
LED
Output signal
Input signal
Prompt
Which of the following is a reason to chose hydraulics of pneumatics for an application.
More precise movement
Faster cycling time
Greater force generated
All of the above
None of the above
What type of programming language do Programmable Logic Controllers (PLC) use?
Input/Output Logic
C++
Java
Ladder Logic
Visual Basic
Which type of motor allows the most accurate movement?
DC motor
servo motor
stepper motor
3 phase motor
This component is used to control high power circuits with a low power circuit.
Junction
Relay
Contact
Transformer
__________ is the type of fitting to be used when you want to connect two circuits to a single supply.
Reducer
Quick Connect
Bushing
Tee
Elbow
Another name for a pneumatic/hydraulic cylinder would be __________.
a power input device
a valve
a control device
an actuator
This type of pneumatic cylinder uses a spring to return a cylinder to the neutral position.
double acting
single acting
spring return
passive return
Automated system built with mechanical, electrical, pneumatic, and software technology is called ________________.
Electronics
Micro-Controller
Mechanical
Mechatronics
Solenoid is a ________________________________.
Coil of Wire
Coil of Solder
Directional Control Valve
Pneumatic Component
Solenoid valves has two main parts:
Solenoid and the valve.
Solenoid and a pneumatic cylinder.
Solenoid and the coil of wire.
Solenoid and an exhaust.
__________________ systems are an integration of electrical and mechanical components with pneumatics.
Mechatronics
Mechanical
Electro-Mechanical
Electro-Pneumatic
Electro-pneumatic systems have a power and a signal control section. The signal section is the ______________.
Pneumatic Section
Electrical Section
Electro-pneumatic systems have a power and a signal control section. The power section is the ____________________.
Pneumatic Section
Electrical Section
FluidSIM is a ...
Programming Language
Electro-pneumatic component
Simulation and Control Programming Software
Mechatronics component
which of the following is an application of Pneumatics
A Pneumatic device used to dismantle an automobile tire.
A pneumatic device used in automobile painting.
A heavy duty pneumatic jackhammer .
To lift cars up to work on them
which are advantages of Pneumatics
Exhaust air is clean.
Air is available everywhere in unlimited quantities.
Compressed air contains dirt and condensates.
Compressed air can easily be stored in a reservoir/tank.
which category does this come under
energy supply
signal input
signal processing
signal output
what is this the symbol of
pressure gauge
air dryer
air filter
Tank
what is this the symbol of
pressure gauge
air dryer
air filter
air resevoir
what is this part
air compressor
air filter
air dryer
air cleaner
name this part
pressure regulator
thermostat
gauge
shut off valve
name this part
pressure regulator
thermostat
gauge
shut off valve
what is this
pressure gauge
shut off
air filter
air resevoir
Pneumatic systems use compressed _________ to transfer force.
Air
Liquid
Solid
Gas
