____________ is a cylindrical piece of material used to transmit mechanical power in the form of torque.

_______________ is the most common type of all shaft materials because it is cheap and easy to machine.

Shaft specifications include the type of material, diameter, tolerance and ____________.

Select 4 commonly used shaft materials

Accuracy stock is a precision ground to more exact tolerance than standard round stock.

Select the different components of mechanical power transmission

The equipment that transmits mechanical power is called _________________.

The equipment that receives mechanical power is called _________________.

______________ is the positioning of the rotational centers of two or more shafts such that they are co-linear when the machines are under normal operating conditions

Select the 3 criteria of shaft alignment

What type of misalignment is described in the picture?

What type of misalignment is described in the picture?

What type of misalignment is described in the picture?

____________ describes the angle between 2 rotating axes

The distance between the shafts of the drive and the driven device.

The distance between rotation axes at a given point.

The shafts is properly aligned when the angle between to rotating axes is zero.

The shafts is properly aligned when the gap between the couplings of the driver and the driven device is equal.

_____________ is a rotational force that causes an object to turn about a point.

A 100 Newton force is applied to a torque wrench with a distance of 300 mm from the axes of rotation. What is the value of torque in Newton-meter?

This torque tool can be programmed and the most accurate torque tool available.

This torque tool is a manually operated hand tool that produces a "click" when the torque setting is reached.

This torque tool uses pressurized air to operate.

This torque tool uses an electric motor to create the torque required to tighten a fastener.

Portable power tools can be carried from one work site to another.

What type of mechanical power transmission component is in the picture?

What type of mechanical power transmission component is in the picture?

What type of mechanical power transmission component is in the picture?

What type of mechanical power transmission component is in the picture?

What type of shaft alignment tool is in the picture?

What type of shaft alignment tool is in the picture?

What type of shaft alignment tool is in the picture?

___________ is a tool to cut a specific sized round hole through a material.

___________ is a tool used to drive a fastener into a material.

___________ is used to drive a fastener in hard to reach areas.

The shaft from the device that delivers power is called the “driven shaft”.

The shaft that receives power is called the “driving shaft”.

Normally the driven shaft is the shaft that will not be moved after it is set up and leveled.

The driving shaft will normally be the shaft that is adjusted during alignment.

Select 3 results of mislignment

When one shaft is not parallel with each other.

When the center of one shaft is at an angle with the other shaft.

Find the force needed when a torque of 15 Nm is applied at a distance of 500 mm?

Find the length of the torque wrench when 625 Nm is required to a force of 2500 N?