NEW
Font size
WorksheetsManufacturing Fall review 2
Total questions: 15
Worksheet time: 8mins
What is the most preventable accident in the shop or workplace?
eye injuries
cuts
Which of the following are Employer expectations?
Cooperation
Dependability
Good Work Ethic
All of these
_________ is a group of people working towards a common goal.
Team
Flight
When is a push stick used on the Bandsaw?
only when cutting thin wood
whenever possible
When using the Bandsaw, your fingers should be...
in line with the blade
on either side of the blade
behind the blade
When using the Bandsaw, your fingers should not get closer to the blade than...
2"
4"
When using the Jointer, you must always...
joint end grain
joint with the grain
apply hand pressure over the blade
Abrasive is another term for...
sandpaper
lumber
On the Compound Miter Saw, you should always...
cut short/small pieces
secure the workpiece
When using the Drill Press you should...
Always use a piece of scrap wood under your work.
Never use a piece of scrap wood under your work.
If you find a hazard like a loose or broken guard on a machine you should...
Ignore it
Fix it and continue
Turn the machine off and let the Teacher know
Who is responsible for cleaning the shop?
Only the Instructor
Students/Anyone working in the shop
The blade guard on the Bandsaw should be no higher than _____ above the piece.
2"
1/4"
What is the smallest unit of measure on a standard tape measure?
1/4"
1/8"
1/16"
3/4"
When operating the Lathe, you must wear...
face shield and safety glasses
an apron
