Font size
WorksheetsJigsaw Safety
Total questions: 40
Worksheet time: 20mins
The Jigsaw.....
Can do basically everything a Bandsaw can do except its portable
is best for crosscutting lumber to the correct length
has a blade that is sharp on both sides
is primarily a rip type saw
A wood vise or other clamping mechanism should be used for holding your work while cutting with a Jigsaw.
True
False
The Jigsaw should not be set down on the table before the blade has come to a complete stop.
True
False
It is okay to work with loose fitting clothing when using a Jig Saw.
True
False
To properly cut material with the Jig Saw, apply consistent steady pressure, with a sharp blade, never force the tool.
True
False
Be sure the blade has been properly attached into the saw before beginning work.
True
False
Its best to use a drill to make an access hole for the Jig Saw blade when performing inside cuts.
True
False
The DeWalt Jigsaw should be unplugged when changing blades or making any adjustments to the tool.
True
False
Since the Jig Saw operates at lower speeds, safety glasses are not necessary.
True
False
Be sure there is space for blade movement underneath your work when operating the Jig Saw.
True
False
Because of its slower operating speed, it is ok to start the Jig Saw with the blade touching the wood.
True
False
Bevel cuts can be made at what angles (select two answers)
0 degrees
15 degrees
45 degrees
60 degrees
Don't ________ the tool, let it cut at its own speed.
force
break
rush
drop
The orbital action does which two?
Pulls the blade back on the cut stroke
Pushes the blade forward on the upward cut stroke
Decreases the cutting speed
Increases the cutting speed
How do you change the blade on the DeWalt and Milwaukee Jig Saws
Variable switch
Keyless blade lever
Trigger switch
Blade guide roller
Other than drilling a pilot hole for the Jig Saw blade, another method for making an inside cut is_____
a plunge cut
an inside cut
a drop cut
a push back cut
On dense materials like hard woods or metal, the orbital action setting should not be used.
True
False
When is it safe to remove Jigsaw blade from the kerf?
While the blade is slowly moving
Only when the blade is completely stopped
While the blade is moving quickly
Only after the tool is safely unplugged.
Which of the following PPE is suggested for the Jig Saw. (pick 2)
Safety glasses
Loose fitting clothes
Tinted face mask shade #5
Correct fitting clothing
What is item # 1
Trigger Switch
Trigger Lock - ON
Speed Control Dial
Cutting Action Lever
What is item # 2
Trigger Lock - ON
Trigger Switch
Speed Control Dial
Trigger Lock - OFF
What is item # 3
Trigger Switch
Speed Control Dial
Trigger Lock - ON
Cutting Action Lever
What is item # 4
Shoe
Cutting Action Lever
Keyless Blade Lever
Blade Guide Roller
What is item # 5
Shoe
Base
Fence
Pad
What is item # 6
Blade Guide Roller
Cutting Action Lever
Keyless Blade Lever
Hand Guard
What is item # 1
Trigger Switch
Trigger Lock - OFF
Trigger Lock - ON
Speed Control Dial
What is item # 2
Trigger Lock - ON
Trigger Lock - OFF
Speed Control Dial
Blade Lock
What is item # 3
Blower Shuttle
Dust Lock
Blade Lock Lever
Cutting Action Lever
What is item # 4
Shoe
Base
Fence
Cutting Lever
What is item # 5
Shoe Adjustment Lever
Cutting Action Lever
Blower Shuttle
Keyless Blade Lever
What is item # 1
Trigger Lock - ON
Trigger Lock - OFF
Trigger Switch
Blower Shuttle
What is item # 2
Trigger Lock
Trigger Switch
Trigger Lock - OFF
Shoe Adjustment Lever
What is item # 3
Battery Attachment
Dust Guard
Hand Guard
Shoe
What is item # 4
Shoe Adjustment Lever
Shoe
Cutting Action Lever
Blower Shuttle
What is item # 5
Shoe
Base
Shoe Adjustment
Blade Guard
What is item # 6
Cutting Action Lever
Shoe Adjustment Lever
Keyless Blade Lever
Blade Lock
What is item # 7
Blade Guide Roller
Blade Guard
Keyless Blade Lock
Shoe Adjustment
What is item # 8
Keyless Blade Lever
Cutting Action Lever
Shoe Adjustment Lever
Blower Shuttle
On the Milwaukee cordless Jigsaw, what does the Blower Shuttle switch do?
Blows air on the cut, removing saw dust
Adjust the angle of the Shoe
Increase the Orbital Cutting action
Locks the Trigger in the Off position
What is the purpose of the Blade Guide Roller (pick two)
Helps the blade remain straight on curved cuts
Allows the blade to move smoothly during the cut
Locks the Blade in a forward position
Adjust the shoe to the correct angle
