Safety is a learned behavior and attitude.

Poor lighting, excessive noise, and inadequate guards for moving parts are examples of

_____.

Breaking a job down into its individual steps and then analyzing each step for potential hazards is called a _______.

The measurement of the odds or probability that something will happen is called __________.

What is the best way to protect workers from a hole on the job site?

The D-ring or support point on a safety harness should be placed _____.

A competent person must inspect Personal Fall Arrest Systems at least how often?

Positioning lanyards are _______.

The top of a straight of extension ladder must extend at least __________ to be safe.

What protections should be in place to prevent objects from falling and striking workers or equipment below when working at height?

Items should never be stacked beyond a _____ height-to base ratio on the job site.

Which of the following statements is NOT true about securing trenches?

If you don't know what classification of soil you are working with, what type should you assume?

Who must inspect excavations to make sure they are safe every day before workers are allowed to enter?

A common method of protecting against electrical shock is the ____________ .

When using double-insulated tools, they must be plugged into a _________.

A system that is designed to prevent workers from being hurt by an energy release hazard is __________.

Who is allowed to remove a lock applied under the lockout/tagout system?

Hardhats should be made of fiberglass or ________.

If you discover that asbestos is present at a job site you should immediately _________.

When there are fine particles in the air like dust or other solid particles that could be inhaled you should wear ________.

Lead was commonly found in _________ prior to 1978.

You need to protect yourself from bloodborne pathogens so that you are not exposed to dangers like _____.

You may be have heat stroke if you experience ________.

___________ is a life-threatening emergency situation that could cause brain-damage or death.

You should _______when welding near other workers or where people might be exposed to the arc who are not wearing the correct PPE

If you have to fight a fire involving electricity you should use a ________ fire extinguisher

You should never enter a permit-required confined space unless ____.

The culture created when the whole company sees the value of a safe work environment

____________ is an agency of the U.S. Department of Labor that enacts and enforces worker safety laws for employers in the United States.

The most common hazard that causes death in construction is __________.

The person who has the most responsibility for your safety is ______.

A physical state that is different from the normal, acceptable, or correct condition on a job site is called a(n) _____.

Repeated exposure to a hazard which may be mild or severe is called ______.

Intense exposure to a high-level of a hazard that occurs just one time is called ___________.

Breathing hazards are called ________ hazards.

Your employer must inform you of any hazards you may be exposed to under the ____________ standard.

Hazards you are exposed to through eating or drinking are called _________ hazards.

Hazards you are exposed to through skin contact are called _____________ hazards.

The term PEL refers to a worker's __________.

What is the minimum tensile strength does a primary fall arrest anchor must have to be safe?

When bloodborne pathogens may be present, you should always use the appropriate _________, eye protection, and masks as needed.

The primary fall arrest lanyard should only be connected to the body harness D-ring located ______.

The bottom of a straight or extension ladder should be placed _______.

If someone is getting an electrical shock, the best thing to do is to immediately ______.

You must use the ________ system when working on equipment that could have a hazardous energy release.

What does PPE stand for?

Hard hats have two major parts, a suspension system and a hard plastic shell made of reinforced plastic or __________.

Most hard hats are no longer made of _______ because it conducts electricity.

_____ is a common type of dust that occurs naturally and is found in many common building materials like concrete, masonry and rock.

If you are fighting a grease fire you should use a _____ fire extinguisher