wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Automotive Preventive Maintenance

Total questions: 20

Worksheet time: 10mins

Name
Class
Date
1.

A car’s warranty may become void if _____ are used.

a)

incompatible fluids

b)

incorrect service procedures

c)

improper intervals

d)

All of the above.

2.

Should the engine be warm or cold when you check the oil level in an automotive engine?

a)

Yes warm

b)

Maybe cold

c)

No warm

d)

Can I ask a friend

3.

The oil level should be between the _____ and _____ _________________________________________________ marks on the dipstick.

a)

add

b)

Full

c)

add (low), full

d)

Don't know where the dipstick is

4.

What causes oil foaming?

a)

Water

b)

adding too much oil to an engine.

c)

Fuel

d)

Spark

5.

Which of the following is not one of the procedures to follow when changing the oil in an automotive engine?

a)

Warm up the engine

b)

Place a catch pan under the oil drain plug

c)

Wipe some clean oil on the O-ring and install the new filter

d)

Using an oil filter wrench, screw the new filter on

6.

When changing the fluid and filter in an automatic transmission, you should

a)

warm the engine and transmission

b)

position the new pan gasket using an approved sealer

c)

start all the pan bolts with your fingers

d)

All of the above

7.

The gear selector should be in _____ when checking the fluid level in an automatic transmission or transaxle.

a)

Reverse

b)

1st gear

c)

Park

d)

3rd gear

8.

Where is the fill plug normally located on an automotive differential?

a)

left rear tire

b)

The fill plug will normally be on the front, back, or side of the differential.

c)

Oil Pan

d)

Does not have one

9.

Why should engine coolant be changed periodically?

a)

Is less expensive in the winter

b)

Make the car run faster

c)

It will change color

d)

The coolant will deteriorate after prolonged use

10.

Power steering fluid level

a)

should be checked regularly

b)

should be checked with the engine off

c)

can be checked on some vehicles by removing a dipstick from the power steering pump

d)

All of the above.

11.

The fluid level in an automotive master cylinder should be checked

a)

every other year

b)

every other month

c)

at least twice a year

d)

None of the above.

12.

When should an air filter be replaced?

a)

Every oil change

b)

Once a Year

c)

An air filter should be replaced when it becomes extremely dirty

d)

Every other Oil change

13.

Modern fuel systems often use _____ fuel filters between the fuel tank and the engine

a)

In the tank

b)

inline

c)

Next to the Water Pump

d)

Could not find it

14.

Name at least four types of hazardous wastes produced by automotive maintenance.

a)

Windshields

b)

Roof

c)

Exhaust System

d)

Used motor oil; discarded lubricants; used parts; cleaners and degreasers contaminated from parts-cleaning operations; fuel injection system cleaners; rust removers; paint thinners or reducers; worn out batteries; tires; catalytic converters.

15.

List three reasons why oil is a hazardous chemical

a)

Oil is a significant fire hazard that can ignite with or without a flame

b)

Oil spills are a slip hazard

c)

Oil can irritate skin and cause skin diseases, including cancer

d)

All of the Above

16.

What is the benefit of having tires inflated to the proper air Pressure

a)

Better fuel economy

b)

Better Steering

c)

Longer tire life

d)

All of the above

17.

The main purpose of tire pressure monitoring systems is to prevent accidents due to.

a)

underinflated tires.

b)

lack of rotation.

c)

punctures

d)

tread separation

18.

How often should you change the Oil in a vehicle?

a)

3 months or 3000 miles

b)

Google any vehicle

c)

Manufacturer's Recommendations

d)

Ask your Mom

19.

In tube tires, the air is retained by the

a)

wheel

b)

tube

c)

inner liner

d)

wheel and tube

20.

Technician A says lug nuts that are too tight on a wheel can cause disc brake components to warp.

Technician B says tightening wheel lug nuts in the wrong sequence can cause the wheel to bend

a)

A only

b)

B only

c)

Both A and B

d)

Neither A or B