NEW
Font size
WorksheetsACD Unit 10 Test
Total questions: 75
Worksheet time: 38mins
Lines that are non-intersecting, non-parallel in 3-D space are known as:
True length lines
Parallel lines
Skew lines
Perpendicular lines
A plane figure bounded by four straight sides is known as:
Quadrilateral
Triangle
Pentagon
Hexagon
A trapezoid is a figure that has:
Two pairs of parallel sides
Two sides parallel
Four equal sides
Five sides
What is the square footage of a rectangular 50'x24' building?
1420
1140
980
1200
The distance across a circle passing through its center is the:
Arc
Major Axis
Diameter
Radius
Chord
The long axis of an ellipse is the:
Chord
Radius
Diameter
Arc
Major Axis
Any straight line whose opposite ends terminate on the circumference of the circle is a(n):
Radius
Major Axis
Diameter
Chord
Arc
The distance from the center point of a circle to the outside circumference is the:
Radius
Arc
Diameter
Major Axis
Chord
Any portion of the circumference of a circle is a(n):
Diameter
Arc
Major Axis
Radius
Chord
A figure encircled so as to touch in as many places as possible is:
Perpendicular
Circumscribed
Symmetrical
Intersect
A quality in which all the features on either side of a point, a line or a plane are identical is:
Symmetrical
Circumscribed
Perpendicular
Intersect
A line at a right angle to another line is:
Symmetrical
Circumscribed
Perpendicular
Intersect
A triangle with one 90 degree angle:
Isosceles
Equilateral
Obtuse
Right
A triangle with three equal sides and three equal angles:
Obtuse
Equilateral
Isosceles
Right
A triangle with two equal sides and two equal angles:
Isosceles
Obtuse
Equilateral
Right
A triangle with an angle over 90 degrees.
Equilateral
Isosceles
Obtuse
Right
An angle less than 90 degrees.
Acute
Complementary
Obtuse
Supplementary
An angle greater than 90 degrees.
Supplementary
Complementary
Acute
Obtuse
Two angles whose sum is 180 degrees.
Acute
Supplementary
Complementary
Obtuse
Two angles whose sum is 90 degrees.
Supplementary
Obtuse
Acute
Complementary
Choose the correct formula to solve for "c": (note: a2 = a×a)
(a×a×a)+(b×b)=c2
a2+b2=c2
b2+a2=c2a
a2+b=c
Choose the correct formula and solve for "c." (note: a2 = a×a)
a2+b2=c2 or (a×a×a)+(b×b)+c2
a=3, b=4, c=?
4
5
6
7
Choose the correct formula and solve for the approximate area of this circle.The radius of the circle is 3.
24.75
31.50
28.25
33.00
Use the following formula and determine the approximate area of this cone.
90.50
92.00
94.25
98.75
What does the symbol represent?
One half
Square
Divide
Square root
Identify the shape.
Square
Pentagon
Triangle
Hexagon
Identify the shape.
Square
Triangle
Pentagon
Hexagon
Identify the shape.
Hexagon
Square
Triangle
Pentagon
Identify the shape
Pentagon
Square
Triangle
Hexagon
Identify the shape.
Ellipse
Rectangle
Octagon
Circle
Identify the shape.
Octagon
Circle
Rectangle
Ellipse
Identify the shape.
Ellipse
Circle
Octagon
Rectangle
Identify the shape.
Rectangle
Circle
Octagon
Ellipse
Add the following Numbers and calculate the sum. 12'- 8" + 2'-4" + 16'-0"
30'-0"
31'-0"
31'4"
31'-8"
Carpet is calculated by the square yard. Determine the square yard of carpet needed for the following room.
12'-6" x 22'-0"
28
30
31
33
Tile is calculated by the square foot. The Tile chosen is 16" x 16" Determine the Number of tiles needed for the following room.
12'-6" x 22'-0"
130
145
155
165
Room volume is measured in cubic feet. Determine the approximate number of cubic feet in the following room.
12'-6" x 22'-0" x 8'-6"
2250
2280
2340
2400
Crown Molding is purchased by the lineal foot. Determine the approximate lineal feet of crown molding needed in the following room.
12'-6" x 22'-0" x 8'-6"
62
65
70
75
Concrete is purchased by the cubic yard. Determine the approximate yards needed for the following slab.
50'-0" x 25'-0" x 4" thick
14.5
15
15.5
16
Choose the correct formula and solve for the approximate area of this cylinder:
247.5
282.6
315
330
The main purpose of a foundation system is:
To provide a solid, level base for wall construction.
To distribute the load of the building over the soil.
To allow even settlement of the building since all buildings settle to some degree.
To distribute the load of the building over the foundation.
The maximum depth at which the ground may freeze is known as the:
Freeze depth
Ice line
Frost line
Dew point
Re-bar with the designation "#5" has a diameter of:
1/2"
5/8"
3/4"
7/8"
A sill plate usually rests on concrete or masonry; therefore it is:
Foam board
Glued to the masonry or concrete wall
Painted
Pressure-treated
In general, the minimum distance between the top of the foundation wall and the grade is:
2 inches
4 inches
8 inches
None of the options
The nominal thickness of a concrete floor slab is about:
2"
3"
4"
5"
6"
The minimum footing thickness for a single story residential structure is normally never LESS than:
4"
6"
8"
10"
12"
Identify the type of foundation
Turn Down Foundation
Slab on Grade
Slip Foundation
Concrete
Identify the type of foundation.
Slip Foundation
Turn Down Foundation
Slab on Grade
Poured T-Wall
Identify the type of foundation.
Concrete
Stone
Brick
Masonry
Identify the type of foundation.
Brick
Stone
Masonry
Concrete
Identify the item indicated.
Slot
Rip Line
Keyway
T-Line
Crawl Space is defined as the:
The area underneath the stairs
The area around the fire place
The area above the ceiling joist
Area below the floor joist
If the Exterior Grade does not permit, one alternative in removing the water accumulated by a French Drain is to use a:
Septic system
Sump pump & wet wall
Drain into the sewer
Drain into the storm water system
When Brick Veneer is used on a residence, it is placed on an area of the foundation called:
Footing
Brick footer
Ledger
None of the options
Every Footing is required to have what to meet building codes?
Reinforcing
Insulation
Waterproofing
Drain pipe
Concrete is available in various compressive strengths, one of which is 3000 psi. What is psi?
Pounds per square inch
Pressure sensitivity indicator
Pressure per square inch
Pressure on soil indicator
The one thing that every structure built is required to have is:
Foundation
Roof
Walls
Door
Identify Item "AA."
Grass
Dirt
Finish Grade
Fill
Identify Item "BB."
Anchor bolt
Extra reinforcing
Plate
Rod
Identify Item "CC."
Wall wrapping
Tar coating
Protection course
None of the options
Identify Item "DD."
Capper
Slab plate
Top of window
Steel lintel
Identify Item "EE."
Wall coating
Waterproofing membrane
Wall wrap
Tar coating
Identify Item "FF."
Gravel fill
Back fill
Concrete fill
Dirt fill
Identify Item "GG."
Tube & drain
Wash drain
French drain
Corrugated drain
Identify Item "HH."
Wall support
Footing
Caisson
Drain wall
Identify Item "JJ."
House wall
Foundation wall
Support wall
None of the options
The sill should always be anchored to the Foundation. The minimum spacing of anchors required should be no less than:
12"
24"
36"
48"
A sill should always have an anchor bolt no less than _______ from each corner.
12"
16"
24"
30"
When a wood-burning fireplace is constructed, the hearth by code must extend a minimum of how many inches beyond the firebox?
12"
16"
24"
30"
When a chimney is constructed, the top of the chimney must extend _______ above the ridge line of the structure.
1'-0"
1'-6"
2'-0"
2'-6"
Unless special-ordered, masonry block is always ______ inches in one direction.
4"
8"
10"
12"
The same symbols used for materials on a floor plan are used on the foundation plan.
True
False
Ventilation is always required for a foundation with a crawl space.
True
False
When a fireplace is required a detailed drawing should always be prepared.
True
False
