wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

vehicle electrical units & vehicle chassis units (c)

Total questions: 15

Worksheet time: 1hrs 15mins

Name
Class
Date
1.

The function of the three position rocker switch on an electric sun roof is to

a)

Amplify the motor torque

b)

Provide an anti trap feature

c)

Allow for varying battery voltages

d)

Reverse the current supply to the motor

2.

What are the tools shown in the image used to remove and refit?

a)

Speakers

b)

Cd player/radio

c)

Parking sensors

d)

Tank sender units

3.

What is the main purpose of tyre lubricant?

a)

To break the tyre bead more easily

b)

To lock the tyre onto the wheel

c)

To stop air leaking from the tyre

d)

To help the tyre slip over the rim

4.

Auxillary systems are often operated through a body control unit this is a

a)

Computer

b)

Motor

c)

Relay

d)

Battery

5.

What is the main reason to follow manufacturers instruction when fitting componenet?

a)

To ensure parts are fitted correctly

b)

To reduce company overheads

c)

To improve company profits

d)

To reduce number of hours sold

6.

The diagram shows a fuel pump circuit , what is the purpose of the FP relay?

a)

To protect the fuel pump from producing too higher pressure

b)

To use a small current to allow a large current flow

c)

To switch the pump on for short periods when cranking

d)

To reverse the pump current and fuel flow for cold starting

7.

Rain sense wiper systems operate

a)

Only when the headlight are on

b)

Only at low ambient temperatures

c)

On driver demand

d)

When moisture is detected

8.

What is the purpose of the tool shown in the image?

a)

Checking tread depths

b)

Measure wheel run-out

c)

Remove the valve core

d)

Checking tyre temperature

9.

Which one of the following would make all the lighting bulbs constantly abnormally bright?

a)

Loose negative battery terminal

b)

Faulty alternator voltage regulator

c)

Loose positive battery terminal

d)

Faulty live feed to the lighting switch

10.

Which one of the following must be carried out on completion of an electric window regulator replacement ?

a)

Check opening and closing limits

b)

Change the door key barrel

c)

Re align the door hinge pins

d)

Adjust the B post striker plate

11.

Which one of the following is not a protection device

a)

Fuse

b)

Bulb

c)

Fusible link

d)

Capacitor

12.

Which one of the following could cause a flat spot on the tyre?

a)

An under –inflated tyre

b)

Incorrect castor angle

c)

An over –inflated tyre

d)

Wheel lock during heavy braking

13.

To what component would the item shown in the image be fiited?

a)

Wishbone arm

b)

Top swivel pin

c)

Top macpherson strut mounting

d)

Lower suspension ball joint

14.

What is the main advantages of an electric power assisted steering system?

a)

A drive belt is not needed

b)

Lower viscosity fluid can be used

c)

Provides assistance when the engine is not running

d)

It reduces the power taken from the engine

15.

What is the purpose of the equipment shown in the image?

a)

Balancing a road wheel

b)

Weighing a road wheel

c)

Adjusting wheel alignment

d)

Removing and replacing tyres